JVC KD-G116 - Manual - manualsarea.com

Page 2 - ENGLISH; IMPORTANT FOR LASER PRODUCTS; How to reset your unit

2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT2. CAUTION: Do not open the top cover. Ther...

Page 3 - Control panel; Contents

3 ENGLISH How to reset your unit ........................... 2How to forcibly eject a disc ................... 2How to read this manual ........................ 4How to use the MODE button ............... 4 Control panel — KD-G116/KD-G115 ............... 5 Parts identification .........................

Page 4 - How to read this manual; How to use the MODE button

4 ENGLISH How to read this manual The following methods are used to made the explanations simple and easy-to-understand:• Some related tips and notes are explained in “More about this receiver” (see page 17). • Button operations are mainly explained with the illustrations as follows: Press briefly. ...

Page 5 - Control panel —; Display window; Parts identification

5 ENGLISH Control panel — KD-G116/KD-G115 Display window 1 +/– buttons 2 DISP (display) button 3 Loading slot 4 Display window 5 MODE button 6 0 (eject) button 7 ¢ / 4 buttons 8 (standby/on/attenuator) button 9 SEL (select) button p MO (monaural) button q SSM (Strong-station Sequential Memory) butto...

Page 6 - Getting started; Basic operations; To turn off the power; Caution on volume setting:; Adjust the sound as you want.

6 ENGLISH Getting started Basic operations To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Caution on volume setting: Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by...

Page 7 - Canceling the display; Finish the procedure.; To activate the display demonstration; Setting the clock; Set the hour and minute.

7 ENGLISH Canceling the display demonstrations If no operations are done for about 20 seconds, display demonstration starts. [Initial: DEMO ON]—see page 14. 1 2 3 4 Finish the procedure. To activate the display demonstration In step 3 above... Setting the clock 1 2 Set the hour and minute. 1 Select ...

Page 8 - Radio operations; Listening to the radio; Start searching for a station.; To tune in to a station manually

8 ENGLISH Radio operations Listening to the radio ~ Lights up when receiving an FM stereo broadcast with sufficient signal strength. Selected band appears. Ÿ Start searching for a station. When a station is received, searching stops. To stop searching, press the same button again. To tune in to a st...

Page 9 - Listening to a preset station; FM station automatic presetting —; you want to store into.; Manual presetting

9 ENGLISH 2 3 Preset number flashes for a while. Listening to a preset station 1 2 Select the preset station (1 – 6) you want. To check the current clock time while listening to an FM or AM station Storing stations in memory You can preset six stations for each band. FM station automatic presetting ...

Page 10 - To stop play and eject the disc; Disc operations; Playing a disc; To fast-forward or reverse the track

10 ENGLISH All tracks will be played repeatedly until you stop playback. To stop play and eject the disc Disc operations Playing a disc Total playing time of the inserted disc Total track number of the inserted disc Elapsed playing time Current track number To fast-forward or reverse the track Fast-...

Page 11 - Selecting the playback modes; Select your desired playback mode.; Random play; Prohibiting disc ejection

11 ENGLISH Selecting the playback modes You can use only one of the following playback modes at a time. 1 2 Select your desired playback mode. Repeat play Ex.: When “TRK RPT” is selected Mode Plays repeatedly TRK RPT : The current track. • RPT lights up. RPT OFF : Cancels repeat play. Random play Ex...

Page 12 - Sound adjustments; Selecting preset sound modes; Indication

12 ENGLISH Sound adjustments Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode suitable to the music genre. ~ Ex.: When “ROCK” is selected Indication pattern for each sound mode: Indication For: Preset values BAS * 1 TRE * 2 LOUD * 3 USER (Flat sound) 00 00 OFF...

Page 13 - Adjusting the sound

13 ENGLISH Adjusting the sound You can adjust the sound characteristics to your preference. 1 Ex.: When “TRE” is selected 2 Indication pattern changes as you adjust the level. Indication To do: Range BAS* 1 (bass) Adjust the bass. –06 (min.) to +06 (max.) TRE* 1 (treble) Adjust the treble. –06 (min....

Page 14 - Indications; General settings — PSM; Basic procedure

14 ENGLISH Indications Selectable settings, [reference page] DEMO Display demonstration DEMO ON: [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [7]. DEMO OFF: Cancels. CLOCK H Hour adjustment 1 – 12, [7] [Initial: 1 (1:00)] CLOCK M Minu...

Page 15 - Detaching the control panel

15 ENGLISH When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power. Attaching the control panel Detaching the control...

Page 16 - Maintenance; How to clean the connectors; To keep discs clean

16 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors.To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors. Connector Moisture condensation Moistu...

Page 17 - More about this receiver

17 ENGLISH More about this receiver Basic operations Turning off the power • If you turn off the power while listening to a disc, disc play will start from where playback has been stopped previously, next time you turn on the power. Tuner operations Storing stations in memory • During SSM search... ...

Page 18 - Symptoms; Troubleshooting

18 ENGLISH Symptoms Causes Remedies General • Sound cannot be heard from the speakers. The volume level is set to the minimum level. Adjust it to the optimum level. Connections are incorrect. Check the cords and connections. • The receiver does not work at all. The built-in microcomputer may have fu...

Page 19 - Specifications; AUDIO AMPLIFIER SECTION; Having TROUBLE with operation?; Please reset your unit; Refer to page of How to reset your unit

19 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Rear: 19 W per channel into 4 Ω , 40 Hz to 20 00...

Page 21 - Installation/Connection Manual; °“√μ‘¥μ—Èß/§ŸË¡◊Õ°“√μ‘¥μ—Èß; Parts list for installation and connection; ‡¡◊ËÕμ‘¥μ—ÈßTMÿ¥a√–°Õ∫‚¥¬‰¡Ë „TMÈa≈Õ°ÀÿÈ¡; When using the optional stay /; ‡¡◊ËÕ„TMÈμ—«¬÷¥·∫∫‡≈◊Õ°‰¥È; TROUBLESHOOTING; °“√μ√«® Õ∫a—≠À“¢—¥¢ÈÕß; °“√∂Õ¥TMÿ¥a√–°Õ∫

KD-G116/KD-G115 Installation/Connection Manual °“√µ‘¥µ—Èß/§ŸË¡◊Õ°“√µ‘¥µ—Èß GET0252-004A [U/UH] 1004DTSMDTJEIN EN, TH ENGLISH This receiver is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have this system, a voltage inverter is required, which can be pu...

Page 22 - ELECTRICAL CONNECTIONS; °“√‡TM◊ËÕ¡‚¥¬„TMÈ ‰øøÈ“; μ√«® Õ∫„ÀÈ·πË „®«Ë“‰¥È‡¥‘π “¬¥‘πμËÕ√–À«Ë“ß‡§√◊ËÕß°—∫μ—«∂—ß √∂¬πμÏ „À¡Ë·≈È«À≈—ß®“°μ‘¥μ—Èß; Typical connections /; °“√‡TM◊ËÕ¡μËÕ·∫∫a°μ‘; Connecting the external amplifier /; °“√μËÕ‡æ‘Ë¡‡μ‘¡‡¢È“°—∫Õÿa°√≥ÏÕ◊Ëπ; ∂Õ¥≈”‚æßÕÕ°®“°TMÿ¥a√–°Õ∫π’È ·≈È«μËÕ‡¢È“°—∫‡§√◊ËÕß¢¬“¬ ∑‘Èß “¬μ–°—Ë«≈”‚æß¢ÕßTMÿ¥a√–°Õ∫π’È ‰«È; ‡§√◊ËÕß¢¬“¬‡; ¢ÈÕμËÕ√Ÿaμ—«; ¢ÈÕ§«√√–«—ß; Õ¬Ë“μËÕ “¬μ–°—Ë«‡§‡∫‘≈°”≈—ß¢Õß≈”‚æß‡¢È“°—∫·∫μ‡μÕ√’Ë√∂¬πμÏ ¡‘©–π—Èπ TMÿ¥a√–°Õ∫®–‰¥È√—; »’øÈ“

ELECTRICAL CONNECTIONS To prevent short circuits, we recommend that you disconnect the batteryʼs negative terminal and make all electrical connections before installing the receiver. • Be sure to ground this receiver to the car’s chassis again after installation. Notes: • Replace the fuse with one o...

Page 23 - CD RECEIVER; INSTRUCTIONS

ENGLISH INDONESIA CD RECEIVER KD-G116/KD-G115 ALAT PENERIMA CD KD-G116/KD-G115 For canceling the display demonstration, see page 7. Untuk membatalkan tampilan demonstrasi, lihat halaman 7. For installation and connections, refer to the separate manual.Untuk instalasi dan penyambungan, lihat buku ped...

Page 43 - Memindahkan alat penerima

KD-G116/KD-G115 Installation/Connection ManualManual Pemasangan/Penyambungan GET0252-006A [UN] 1004DTSMDTJEINEN, IN ENGLISH This receiver is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be pu...

Page 44 - SAMBUNGAN-SAMBUNGAN LISTRIK; Typical connections / Ciri khas sambungan-sambungan; Connecting the external amplifi er / Menyambung penguat luar

15 ELECTRICAL CONNECTIONS To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all electrical co fore installing the receiver. • Be sure to ground this receiver to the car’s chassis again after installation. Notes: • Replace the fuse with one of the sp...

Page 66 - PRECAUTIONS on power supply and speaker

15 ELECTRICAL CONNECTIONS To prevent short circuits, we recommend that you disconnect the batteryʼs negative terminal and make all electrical connections before installing the receiver. • Be sure to ground this receiver to the car’s chassis again after installation. Notes: • Replace the fuse with on...

JVC KD-G116 - Manual

Table of Contents:

Summary

Other JVC Car Radios Models