Page 2 - CAUTION
2 This lightning flash with arrowhead symbol withinan equilateral triangle is intended to alert theuser to the presence of uninsulated dangerousvoltage within the product’s enclosure that maybe of sufficient magnitude to constitute a risk ofelectric shock to persons. The exclamation point within an ...
Page 3 - IMPORTANT SAFETY INSTRUCTIONS
3 1. Read these instructions. - All these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - The safety, operating and use instructions should be retained for future reference. 3. Heed all warnings. - All warnings on the product and in the ...
Page 4 - Contents; About the
4 Contents Introduction . . . . . . . . . . . . . . . . . . . . . .5 Moisture Condensation . . . . . . . . . . . . . . . . . .5Symbol Used in this Manual . . . . . . . . . . . . . .5 About the Symbol Display . . . . . . . . . . . . .5 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .5Ty...
Page 5 - Handling Discs; Introduction
5 To ensure proper use of this product, please read thisowner’s manual carefully and retain it for future reference. This manual provides information on the operationand maintenance of your unit. Should the unit requireservice, contact an authorized service location. Moisture Condensation Never oper...
Page 6 - Types of Playable Discs; Regional Code; Notes on Regional Codes; Notice for Progressive Scan Use; ALL
6 Types of Playable Discs DVD(8 cm / 12 cm disc) Video CD (VCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD±R/RW, CD-R/RW and SVCD, Dual disc that containsaudio titles, and/or JPEG files. This indicates a product feature that is capable ofplaying DVD-RW discs re...
Page 7 - PM; POWER; Front Panel
7 Introduction The DVD deck is selected. A disc is in the DVD deck.(Lights when a disc is in the DVD deck and Flashes when no disc.) Indicates when the Progressive scan is active. Indicates repeat mode. The unit is in timer recording or a timer recordingis programmed (VCR part only).This indicator w...
Page 8 - Remote Control; Operation Range
8 a 1 1/ / I (POWER) : Switches unit ON and OFF. * : This button is not available. Z Z (OPEN/CLOSE) : Opens and closes the disc tray. DVD : Select the unit function mode to DVD. VCR : Select the unit function mode to VCR. AUX : Selects the VCR deck’s source (LINE 1 or LINE 2). DISPLAY : Accesses On-...
Page 9 - AC Power Cord; a b c d; Rear Panel; Caution
9 Introduction a VCR IN LINE 1 (VIDEO/AUDIO (Left/Right)) Connect the audio/video output of an external source(Cable/Satellite box, Audio system, TV/Monitor, VCR,Camcorder). b DVD/VCR OUT (VIDEO/AUDIO (Left/Right)) Connect to a TV with video and audio inputs. c COMPONENT/PROGRESSIVE SCAN VIDEOOUT (Y...
Page 10 - Basic TV Connections; Audio/Video connection; Optional TV Connections; Audio connection; Preparation
10 Depending on your TV and other equipmentthere are various ways you can connect theplayer. Please refer to the manuals of yourTV, VCR, stereo system or other devices asnecessary for additional connection information. Notes: • The picture and sound of a nearby TV, VCR, orradio may be distorted duri...
Page 12 - Connection to an Amplifier; Digital Multi-channel sound
12 Connection to an Amplifier You can only listen to DVD playback using COAXIAL (X) and AUDIO OUT (A2) connections. The VCR will still be heard through the DVD/VCR AUDIO OUT (A1) jack. Connecting to an amplifier equipped with twochannel analog stereo or Dolby Pro Logic II/ProLogic Connect the Left a...
Page 13 - Initial Settings - VCR; General Operation; FUNCTION OSD
13 Preparation Initial Settings - VCR By using the VCR Setup menu, you can make various adjustments to items such as clock setting,and timer recordings. Your unit allows remote control adjustment of severalfeatures. General Operation 1. Press VCR on the Remote Control. 2. Press SETUP MENU and the MA...
Page 14 - Initial Settings - DVD; To display and exit the Menu:
14 Displaying Disc Information on-screen You can display various information about the discloaded on-screen. 1. Press DISPLAY to show various playback information.The displayed items differ depending on the disctype or playing status. 2. You can select an item by pressing v / V and change or select ...
Page 16 - Bitstream –; OTHERS; PBC; On
16 AUDIO Each DVD disc has a variety of audio output options.Set the player’s AUDIO options according to the typeof audio system you use. Dolby Digital / DTS / MPEG Bitstream – Select “Bitstream” if you connect this DVD player’s DIGITAL OUT jack to an amplifier orother equipment with a Dolby Digital...
Page 17 - number Key “1”
17 Preparation Remote Control Function Remote Control A/B/C Code Switching The remote control is capable of controlling threeJVC video units independently. Each of the units canrespond to one of three codes (A, B or C). Theremote control is preset to send C code signalsbecause your unit is initially...
Page 18 - VCR Tape Playback; VCR; Operation
18 This chapter describes how to operate the VCR andDVD. VCR Tape Playback Press the VCR button to select the device to be oper- ated. Basic Instructions 1. Turn on the TV. 2. Direct VIDEO/AUDIO connection is made between the unit and the TV, set the TV’s sourceselector to VIDEO. 3. Insert a pre-rec...
Page 19 - VCR Tape Recording; To pause the recording; Instant Timer Recording; Checking the Recording Time
19 Operation CM SKIP (Commercial Skip) This feature is useful for skipping commercials orshort program segments. 1. Press in playback mode. The unit performs a fast forward picture searchthrough 30 seconds of recording. 2. Press again to extend the search time by an addition 30 seconds. The maximum ...
Page 20 - Manual Timer Programming; Checking or Erasing the Timer Program
20 Manual Timer Programming 1. Press SETUP MENU and the main menu appears. 2. Use v / V to choose the PROGRAM option and press ENTER (OK). If eight programs are already entered, the FULLYPROGRAMMED message appears for a momentand then PROGRAM 1 appears on the TVscreen. 3. Use the v / V buttons to sw...
Page 21 - Program Priority
21 Timer-Link Recording(External Timer Recording) If the external device such as Cable/Satellite box thatis connected to this unit has the timer reservationfunction, this unit can record the input signal fromexternal device via the timer LINE1 jack. 1. Connect the LINE1 input jacks on this unit to t...
Page 22 - Copying from DVD to VCR
22 Copying from DVD to VCR You can copy the contents of a DVD to a VHS tape. 1. Insert the disc you wish to copy into the DVD deck and close the disc tray. 2. Insert a blank VHS video tape into the VCR deck. 3. Find the place on the DVD from which you want to start dubbing using the PLAY, FF, REW an...
Page 23 - Additional VCR Information; VCR Auto Play System
Operation 23 Additional VCR Information • During manual recording playback, or fast forwardmodes, the unit automatically starts rewinding thetape at the end of the tape. The cassette stops atthe beginning of the tape and is ejected. • After you have finished using the unit, rewind,eject, and remove ...
Page 24 - Discs
24 DVD Disc Playback (General Features) Buttons Operations Z (OPEN / CLOSE) Opens or closes the disc tray. X (PAUSE) During playback, press X to pause playback. Press X repeatedly to play Frame-by-Frame. . / > (SKIP) During playback, press . or > to go to the next chapter/track or to return to...
Page 25 - Additional features
25 Operation Notes on general features: • If you press > once during Repeat Chapter (Track) playback, the repeat playback cancels. • Zoom may not work on some DVDs. • When you are playing a DVD disc that contains scenes recorded different camera angles, the angleindicator will blink on the TV scr...
Page 26 - Playing an Audio CD; Audio CD; Programmed Playback; Repeat Programmed Tracks; Erasing the Complete Program List
26 Playing an Audio CD This unit can play Audio CDs. Audio CD Once you insert an Audio CD, a menu appears onthe TV screen. Press v / V to select a track/file then press N (PLAY) or ENTER (OK) and playback starts. You canuse variable playback functions. Refer to page 24-25. Programmed Playback The pr...
Page 27 - Viewing a JPEG file; Slide Show; Still Picture; Rotating the picture
27 Operation Viewing a JPEG file This unit can play JPEG files. 1. Insert a disc of JPEG files. The PHOTO menu appears on the TV screen. 2. Press v / V to select a folder, and press ENTER (OK). A list of files in the folder appears. 3. If you want to view a particular file, press v / V to highlight ...
Page 28 - Playing a DVD VR format Disc; Maintenance and Service; Handling the Unit; When shipping the unit
28 Playing a DVD VR format Disc This unit will play DVD-R/RW discs that are recordedusing the DVD-Video format that have been finalizedusing a DVD-recorder. This unit will play DVD-RW discs that are recordedusing the Video Recording (VR) format. 1. Insert a disc and close the tray, and playback star...
Page 29 - Reference; Language Codes
29 Operation Reference Language Code Abkhazian 6566 Afar 6565 Afrikaans 6570 Albanian 8381 Ameharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Aymara 6588 Azerbaijani 6590 Bashkir 6665 Basque 6985 Bengali; Bangla 6678 Bhutani 6890 Bihari 6672 Breton 6682 Bulgarian 6671 Burmese 7789 Byelorussian 66...
Page 30 - Troubleshooting; Symptom
30 Troubleshooting Symptom No power. Abnormal or no picture Distorted or no sound. The playback picture ispoor. The unit does not startplayback. Cause The AC power plug is disconnectedfrom the AC outlet. The TV is not set to receive unit signaloutput. The video cable is not connectedsecurely. Unit o...
Page 31 - Correction
31 Reference Symptom Video tape cannot beinserted. No Hi-Fi sound The Remote Controldoes not work properly. Camcorder image isnot shown. Camcorder image viaAV input to unit is notshown on TV screen. Cause The cassette tape is already loaded. Audio mode is not set properly. There is an obstacle in th...
Page 32 - Specifications
32 General Power requirements 120V, 60 Hz Power consumption 16 W Dimensions (approx.) 16.9" X 3.1" X 10.2" (430 X 79 X 260 mm) (w x h x d) Net Weight (approx.) 8.8 lbs (4.0 kg) Operating temperature 5 ˚ C to 40 ˚ C (41 ˚ F to 104 ˚ F) Operating humidity 5 % to 90 % Signal system NTSC Inp...
Page 34 - MEMO
