JVC HR-J381EM - Manual
JVC HR-J381EM – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Front Panel
- Page 3 – Remote control; Basic Connections; RF Connection
- Page 4 – Initial Settings; Video Channel Set; Installing/Removing the lithium battery; Auto Set Up
- Page 5 – Playback; Basic Playback
- Page 6 – Playback Features
- Page 7 – Recording; Basic Recording; Recording Features; Watching one program while recording another
- Page 8 – Timer Recording; Express Timer Programing
- Page 9 – Program overlap warning display; Other Functions; Checking tape position
- Page 11 – Multi-Brand Remote Control; TV Brand Setting
- Page 13 – Information on Multi-System Compatibility
- Page 14 – Tuner Setting; Auto Channel Set; Manual Channel Set
- Page 16 – Specifications
VIDEO CASSETTE RECORDER
HR-J381EM
INSTRUCTIONS
LPT0592-001C
Printed in Malaysia
COPYRIGHT © 2001 VICTOR COMPANY OF JAPAN, LTD.
0501 MNV
f
PJ
f
PJ
EM
Safety Precautions
The rating plate and the safety caution are on the rear of the unit.
WARNING: DANGEROUS VOLTAGE INSIDE
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
●
Cassettes marked “VHS” (or “S-VHS”) can be used with this
video cassette recorder. However, S-VHS recording is not
possible with this model.
●
HQ VHS is compatible with existing VHS equipment.
CAUTION
䡲
When you are not using the recorder for a long period of
time, it is recommended that you disconnect the power cord
from the mains outlet.
䡲
Dangerous voltage inside. Refer internal servicing to qualified
service personnel. To prevent electric shock or fire hazard,
remove the power cord from the mains outlet prior to
connecting or disconnecting any signal lead or aerial.
䡲
Use the conversion plug depending on the type of your AC
wall outlet.
ATTENTION
1. This recorder can also receive SECAM colour television
signals for recording and playback.
2. Recordings made of SECAM television signals produce
monochrome pictures if played back on another video
recorder of SECAM standard, or do not produce normal
colour pictures if played back on another video recorder of
PAL standard.
3 SECAM prerecorded cassettes or recordings made with a
SECAM video recorder produce monochrome pictures when
played back with this recorder.
POWER SYSTEM:
This set operates on voltage of AC110 – 240 V
d
(Rating), AC90 –
260 V
d
(Operating), 50/60 Hz with automatic switching.
Caution on Replaceable lithium battery
The battery used in this device may present a fire or chemical
burn hazard if mistreated. Do not recharge, disassemble, heat
above 100°C or incinerate.
Replace battery with Panasonic (Matsushita Electric), Sanyo,
Sony or Maxell CR2025. Danger of explosion or Risk of fire if
the battery is incorrectly replaced.
䡲
Dispose of used battery promptly.
䡲
Keep away from children.
䡲
Do not disassemble and do not dispose of in fire.
IMPORTANT
䡲
Please read the various precautions on this page before
installing or operating the recorder.
䡲
It should be noted that it may be unlawful to re-record pre-
recorded tapes, records, or discs without the consent of the
owner of copyright in the sound or video recording,
broadcast or cable programme and in any literary, dramatic,
musical, or artistic work embodied therein.
The STANDBY/ON
1
button does not completely shut off
mains power from the unit, but switches operating current on
and off. “
`
“ shows electrical power standby and “
!
“ shows
ON.
Video tapes recorded with this video recorder in the LP (Long
Play) or EP (Extended Play) mode cannot be played back on a
single-speed video recorder.
HR-J387EM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear). When discarding batteries, environmental problems must be considered and the local rules or laws governing the ...
Remote control * Not function with this recorder. On-screen display If you press OK on the remote control when “O.S.D.” is set to “ON”, you can see the current recorder status on the TV screen. After about 5 seconds, indications other than the time counter disappear. To clear the time counter, press...
Initial Settings Video Channel Set Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable. Before performing the following steps, make sure the recorder’s power is off and there is no cassette inserted in the ...
