JVC DR-DV5000 - Manual
JVC DR-DV5000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – FireStore DR-DV5000 QuickStart Guide
- Page 3 – Power Options
- Page 4 – GETTING STARTED
- Page 8 – TALLY
QUICKSTART GUIDE
For Operating System Version 1.2
INTRODUCTION
Thank you for choosing the Focus
Enhancements’ FireStore DR-DV5000 DV
Disk Recording Module for JVC Professional
DV Camcorders.
The purpose of this QuickStart document is to
introduce the features and operation of the
FireStore DR-DV5000. The complete User
Guide is available on the CD-ROM that came
with the FireStore unit. It is advised that users
get familiarized with the product by reading
the User Guide before attempting to use
this product. If you are unable to locate the
User Guide or require further assistance,
please visit:
www.focusinfo.com/support
Alternatively, contact your Focus
Enhancements or JVC FireStore
dealer/distributor.
PHYSICAL FEATURES
Your FireStore DR-DV5000 features two
main surfaces, the front panel and the rear
connector panel.
Front Panel
The front panel contains the backlit LCD and
9 buttons for controlling FireStore’s functions.
The top row of buttons act as soft keys and
provide the function displayed on the bottom
of the LCD.
The front panel also features a tally light,
infrared remote sensor and power switch.
PAGE 1
FireStore DR-DV5000 QuickStart Guide
FireStore DR-DV5000 QuickStart Guide
DR-DV5000
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PAGE 2 REAR CONNECTOR PANEL The rear connector panel features a 6-pinFireWire port for DV video I/O (A), a 6-pinFireWire port for connection of externalFireWire drives or a computer (B), a 4-pinXLR DC power input (C) and a 3.5mmcontrol cable input for RS232C, GPI or wiredremote control (D). MOUNTING...
5) Once mounted, secure the two captivescrews at the base of DR-DV5000 tothe camcorder. 6) Re-attach the battery system to the rear of the DR-DV5000. Ensure to connect allpower cables and utilize the supplied gasketbetween DR-DV5000 and the battery system. 7) Finally, connect a 6-pin to 4-pin FireWi...
handle firmly until the handle meets the top ofDR-DV5000. If power is on, you will observethe power LED light up green. REMOVING THE HDD: Slide the HDDrelease latch on the DR-DV5000 top platetoward the battery system. Once slid as far aspossible, hold the latch while at the same timegrasping the FSH...
