Page 2 - Thank you for buying this JVC colour television.
2 15 cm 10 cm 10 cm 15 cm WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. 1 Operate only from the power source indicated on the rear of the TV.2 Avoid damaging th...
Page 3 - Knowing your TV’s features; Confirm your TV’s functions; Main features
3 Knowing your TV’s features 1 Confirm your TV’s functions Some functions written in this instruction manual may not be available for your TV.Please see the chart below and check the functions that are equipped for your TV’s model number. Themodel number is indicated at the rear of your TV. When you...
Page 4 - Remote control buttons and basic functions; Press
4 Remote control buttons and basic functions No. Press To 1 POWER Turn on or off the TV from standby mode. 2 MENU/OK Display menu and confirm selected function. 3 5 / ∞ / 2 / 3 Select and adjust menu function. 4 CHANNEL -/+ Select the desired channel number. 5 VOLUME -/+ Adjust the volume level. 6 T...
Page 5 - Remote control buttons and basic functions (continued); How to operate menus and menus locations
5 Remote control buttons and basic functions (continued) The following chart shows locations of functions in menus. In this manual,location of a function is described as follows: Note: Some functions have the 4th menus as the sub-menus. To Display the MENU Display the topmenu Display the 2ndmenu Dis...
Page 6 - TV buttons and functions; Front of the TV
6 TV buttons and functions The illustrations shown below is for AV-29VS14 and AV-21CS14 only, which are used for explanation purpose.Your TV may not look exactly the same as illustrated. IN (VIDEO-3) V R MENU OK L/MONO CHANNEL VOLUME TV/VIDEO EXIT POWER ! 9 8 7 6 5 2 3 4 1 Front of the TV AV-29VS14 ...
Page 7 - CAUTION; Turn off the equipment including the TV before connecting.
7 1 Connecting the aerial cable. If you connect a VCR, connect the aerial output jack of your VCRand the aerial jack on the TV with the aerial cable. Then connect theoutput jacks of your VCR and the VIDEO-1 input jacks of the TVwith the video cable (or S-VIDEO cable if available) and audiocables. Fo...
Page 8 - Making the initial settings
8 5 Making the initial settings Set up your TV by pressing any button except POWER button, then operate the TV menu by following the steps as below: • Press 5 / ∞ button to select your desiredlanguage, then pressMENU/OK button. • TV will start searching for the channels. To stop AUTOPROGRAM, pressME...
Page 9 - COLOUR SYSTEM; To operate this function with a menu:; PICTURE MODE; *TINT can only be adjusted in NTSC system.; Basic setting for picture
9 COLOUR SYSTEM You can select the appropriate colour system when the picture isnot clear or no colour appears.Press the COLOUR SYSTEM button to select a setting. To operate this function with a menu: For the colour system in each country or region, see the tablebelow: PICTURE MODE You can choose th...
Page 10 - Adjusting the picture – USER; Select the USER in PICTURE MODE under PICTURE menu.; WHITE BALANCE
10 Adjusting the picture – USER You can adjust the desired picture setting when selecting USERin PICTURE MODE. 1 Select the USER in PICTURE MODE under PICTURE menu. 2 Select the PICTURE SETTING in PICTURE menu, then adjustthe setting. CONTRAST 2 : Lower contrast 3 : Higher contrast BRIGHT 2 : Darker...
Page 11 - Correcting the Slanting Picture (PICTURE TILT); The following display appears.; BLUE BACK; Advanced setting for picture
11 AI ECO SENSOR (ECO) You can adjust TV screen contrast according to the brightness ofyour room.Press the ECO button to select the desired mode. 1 Mild contrast (recommended). 2 Even contrast. OFF Cancel the function. To operate this function with a menu: You can display the graphic of AI ECO SENSO...
Page 12 - SOUND SYSTEM; Basic setting for sound; SOUND MODE
12 SOUND SYSTEM You can select an appropriate sound system when abnormalsound occurs even when the picture appears normally.Press the SOUND SYSTEM button to select a setting. This function is not available in video mode.For the sound system in each country or region, see the tablebelow: Basic settin...
Page 13 - Advanced setting for sound
13 CINEMA SURROUND You can enjoy an enhanced sound for wider audience.Press the CINEMA SURROUND button to select a setting. OFF Cancel the function. LOW Listen to sound with less wider audience effect. HIGH Listen to sound with more wider audience effect. MONO Listen to mono sound with stereo effect...
Page 14 - To register the favorite channel; Favorite channel and video setting; To adjust the video setting (VIDEO SETTING)
14 To register the favorite channel You can register and recall 4 favorite channels by using thecolour buttons (red, green, yellow, blue). 1 In TV mode, select a TV channel (PR01-99) you desired to register. 2 Press and hold a colour button for 3 seconds or more.“FAVORITE CHANNEL ■ PROGRAMMED!” appe...
Page 15 - Customized setting; CHILD LOCK
15 VNR You can reduce the noise.Select the VNR in the PICTURE FEATURES menu underPICTURE menu, then choose a setting of VNR function. OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. MAX Effect of VNR becomes maximum level. If you select...
Page 17 - To register the TV channels automatically; TV channel presetting
17 To register the TV channels automatically You can register the TV channels into the TV’s channel listautomatically. 1 Display the INSTALL menu. 2 Choose AUTO PROGRAM, then press the MENU/OK button.AUTO PROGRAM function starts, and the channels receivedare registered in the channel list (PR list) ...
Page 19 - Country; Channel
19 TV channel presetting (continued) CH/CC number When you want to use the INSERTfunction on page 18, find the CH/CCnumber corresponding to the channelnumber of the TV channel from this table. Channel No. Country US United States, Philippines, etc.. CCIR Middle East, Southeast Asia,etc.. OIRT Easter...
Page 20 - Before connecting; • Read the manuals provided with the devices for the proper; Connecting to front video input terminal; Additional preparation; Front of TV
20 V L R V L R /MONO OUTPUT VIDEO-1 INPUT V L R R L/MONO Y C B C R /V V S OVER L R /MONO OUTPUT VIDEO-1 INPUT COMPONENT (VIDEO-2) INPUT The illustrations shown in this section are for AV-29VS14 andAV-21CS14 only, which are used for explanation purpose. YourTV may not look exactly the same as illustr...
Page 21 - Troubleshooting
21 Troubleshooting If a problem occurs when you are using the TV, check the belowtroubleshooting guide before calling for repair. • Deactivate the BLUE BACK function if it is turned on. • Choose the appropriate sound system. Refer to “SOUND SYSTEM” on page 12. • Check the aerial cable and its connec...
Page 22 - Specifications; TV RF systems
VICTOR COMPANY OF JAPAN, LIMITED © 2004 VICTOR COMPANY OF JAPAN, LIMITED 0604-FLE-JMT Specifications TV RF systems B, G, I, D, K, M Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U)Receives cable channels in mid ba...
Page 23 - INSTRUCTIONS; Contents; COLOUR TELEVISION; EQUALIZER • CINEMA SURROUND • COMPONENT INPUT
INSTRUCTIONS GGT0045-001C-H AV-29LS24 AV-21CS24 AV-29LX14 AV-21CX14 AV-29VS24 AV-21DX14 AV-29VX54 AV-21LX14 AV-29VX74 AV-21VS24 AV-29WX14 AV-21VX14 AV-29WX24 AV-21VX54 AV-25LS24 AV-21VX74 AV-25LX14 AV-21WS24 AV-25VS24 AV-21WX14 AV-25VX54 AV-21YX14 AV-25VX74 Contents Knowing your TV’s features .........
Page 25 - TELETEXT
3 Knowing your TV’s features 5 1 2 4 3 6 Confirm your TV’s functions Some functions written in this instruction manual may not be available for your TV.Please see the chart below and check the functions that are equipped for your TV’s model number. Themodel number is indicated at the rear of your TV...
Page 29 - Connecting the compatible main plug to the AC outlet.; • Turn off the equipment including the TV before connecting.; Connecting the aerial cable.; Turn on the TV by pressing the main power button.
7 2 Connecting the compatible main plug to the AC outlet. Setting up your TV CAUTION • Turn off the equipment including the TV before connecting. VHF/UHF outdoor aerial 75-ohm coaxial cable (not supplied) 1 Connecting the aerial cable. 3 Inserting batteries into the remote control. Insert two batter...
Page 30 - РУССКИЙ
8 5 Making the initial settings Set up your TV by pressing any button except POWER button, then operate the TV menu by following the steps as below: • Press 5 / ∞ button to select your desiredlanguage*, then pressMENU/OK button. • Press 5 / ∞ button to select your desiredTeletext languagegroup*. For...
Page 32 - PICTURE BOOSTER
10 Adjusting the picture – USER You can adjust the desired picture setting when selecting USERin PICTURE MODE. 1 Select the USER in PICTURE MODE under PICTURE menu. 2 Select the PICTURE SETTING in PICTURE menu, then adjustthe setting. CONTRAST 2 : Lower contrast 3 : Higher contrast BRIGHT 2 : Darker...
Page 34 - PIP; Original features for picture; You can watch the Teletext broadcast channel with TEXT function.
12 PIP You can display a sub picture on the screen.Press the PIP operation buttons to display and change the subpicture setting. PIP Display the sub picture.To cancel, press the PIP button again. Notes: • You can hear the sound from the main picture only.• Main picture and sub picture will use diffe...
Page 35 - Original features for picture (continued); Using the List mode; In TEXT mode, press the MODE button to enter the List mode.; TEXT LANGUAGE
13 Original features for picture (continued) Using the List mode You can store and recall the favorite teletext pages in memoryusing the colour buttons. 1 In TEXT mode, press the MODE button to enter the List mode. 2 Press a colour button, then press the number buttons to enterthe page number. 3 Pre...
Page 46 - Please see the table in the description “TEXT LANGUAGE” on page 13.; Design and specifications subject to change without notice.
VICTOR COMPANY OF JAPAN, LIMITED © 2004 VICTOR COMPANY OF JAPAN, LIMITED 0504-FLE-JMT Specifications TV RF systems B, G, I, D, K, M Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U)Receives cable channels in mid ba...