JVC AV-21D31, AV-20N31, AV-14F31, AV-21D11, AV-20N11, AV-14F11 - Manual

6 G E T T I N G S T A R T E D REMOTE CONTROLS CHANGING THE BATTERIES Be sure to use only size AA/R6/UM-3 batteries. 1 Raise the latch on the remote's back cover toremove it. 2 Insert the two supplied batteries, carefully notice the“+” and “–” markings on the batteries and remotecontrol. To avoid a s...

7 G E T T I N G S T A R T E D POWER ❒ Press the Power button ( ) on the TV front panel. The Power lamp will light red. ❒ If the TV will not be turned on even if you press the P OWER button, the TV is in the stand-by mode. Press the P OWER button on the remote control to turn on the TV. ❒ To turn the...

8 U S I N G T H E M E N U USING THIS GUIDE: Throughout this guide there are certain symbolswe use as shorthand to show you what to do.When you see them, keep these factors in mind: Up and down arrows mean press theM ENU U P or M ENU D OWN buttons. Pressing the up or down buttons allows you to: • Mov...

9 I N I T I A L S E T U P AUTO TUNER SETUP During Auto Tuner Setup, the TV willautomatically scan through all avail-able channels and memorize theactive ones so that when you scan,you do not pick up weak or noisychannels. To AUTO TUNER SETUP To operate TUNER MODE : CABLE AIR START To choose CABLE or...

10 P I C T U R E S E T T I N G S NOTE: To exit the PictureSettings menu,press the Exitbutton at anytime. TINT (NTSC ONLY) Tint allows you to adjust the levels ofred and green in the picture. The tintoption appears only when the TV colorsystem is NTSC. To TINT To accentuate green To accentuate red To...

11 S O U N D S E T T I N G S NOTES: STEREO MODEL ONLY!! Bass, Treble,Balance, and MTSare available on: • AV-21D31• AV-20N31• AV-14F31MTS has no effecton normal soundbroadcasts. BASS The Bass level adjustment featureallows you to increase or decrease thelevel of lower frequencies in the TV’ssound. To...

12 G E N E R A L I T E M S SET CLOCK The Clock is the heart of all timerfunctions. You must set the clockbefore any timer functions will work. To SET CLOCK To operate TIME 12:34 AM START CLOCK To set the hour (AM/PM) To move to minutes To set the minutes To move to START CLOCK whendone with settings...

13 G E N E R A L I T E M S NOTES: There are twosections inChannelSummary. To move up anddown a column(e.g. fromchannel tochannel) use theChannel m button. To move fromitem to item (e.g.from channelnumber to add tolock) use thearrow up/downkeys. Noise Muting willnot work whileyou operate theChannelSu...

14 G E N E R A L I T E M S SET LOCK CODE The Lock Code locks and unlocksChannel Guard. Write this three digitnumber down and keep it wherewould-be viewers will not look for it! To SET LOCK CODE To operate The padlock icon appears Zero (the access code is zero) LOCK CODE 000 FINISH To the first numbe...

15 B U T T O N F U N C T I O N S NOTE: Please note thatif the clock,SleepTimer, orOn/Off Timer arenot set, the initialDisplay screenwill state “ClockNot Set,” “SleepTimer Off,” and“On/Off TimerOff,” respectively. VIDEO STATUS The Video Status button lets youselect the settings when you play agame, w...

16 B U T T O N F U N C T I O N S NUMBER BUTTONS10 KEY PAD Press two of the number buttons to moveto single and double digit channels. To move to Channel 7: 0 (zero) 7 (seven) 100 + BUTTON The 100+ button accesses all chan-nels above Channel 99. To move to Channel 124: 100+ 2 (two) 4 (four) MUTING Th...

17 PICTURE BOOSTER When the picture is unclear becausethe reception level of the TV signal islow, activating the Picture Boosterimproves the picture clarity in somesituations. P ICTURE B OOSTER > OFF > HIGH > LOW > OFF: The Picture Booster off. HIGH: The Picture Booster is function-ing a...

18 PROBLEMS There is no power There is no picture or no sound Remote control is not operating or operating properly You cannot select a certain channel The power turns off by itself The clock is wrong On Timer lamp is blinking PICTURE The picture color quality is poor There are lines across the pict...

19 MODEL AV-21D31/AV-20N31/AV-14F31 AV-21D11/AV-20N11/AV-14F11 Color systems PAL, NTSC PAL, NTSC TV RF systems M, N M, N Channels VHF 2 to 13, VHF 14 to 69 VHF 2 to 13, VHF 14 to 69 Sub Mid, Super, Hyper and Ultra bands Sub Mid, Super, Hyper and Ultra bands Sound-multiplex BTSC (Multi Channel Sound)...