Page 2 - Important safety information; Installation
2 For the user Important safety information It is most important that this instruction book should be retained withthe appliance for future reference. Should the appliance be sold ortransferred to another owner, or should you move house and leave theappliance, always ensure that the book is supplied...
Page 4 - Environmental information
4 enable, for example, the use of economical overnight electricity tariffs. • Automatic wash programme: This machine is fitted with a turbidity sensor which intelligently adjusts the temperature and rinsing cycles during the wash programme, depending on the degree of soiling on the dishes. This help...
Page 5 - Contents
Contents 5 For the user Important safety information 2 Description of the appliance 6 The control panel 7 Indicator lights 7 Setting mode 8 Washing programmes 9 When the dishwasher is first installed 11 The water softener 11 Adjusting the water softening system 12 Filling with dishwasher salt 12 Fil...
Page 6 - Description of the appliance
6 Description of the appliance 1. Upper basket2. Water hardness dial3. Salt container4. Detergent dispenser5. Rinse aid dispenser 6. Rating plate7. Filters8. Lower spray arm9. Upper spray arm10. Worktop
Page 7 - The control panel
7 The control panel All the dishwasher controls are grouped on the upper panel. Switch-on, programming, switch-off etc. procedures are only possible when the door is open. 1. On/Off buttonPressing this button energises the appliance. 2. Selected programme indicator lightsIllumination of this light d...
Page 8 - Setting mode
8 Setting mode To select the most suitable programme for the dishes to be washed refer to the table below, which indicates the most appropriate programme according to dish type and degree of soiling. After using the table to identify the most appropriate washing programme:• press the ON/OFF button (...
Page 9 - Washing programmes
9 Washing programmes Before starting a washing programme make sure that:- The water supply tap is open.- The correct amount of detergent has been added to the dispenser.- The baskets have been correctly loaded.- The spray arms are able to rotate freely and without obstruction.- The dishwasher door i...
Page 11 - The water softener
11 When the dishwasher is first installed Before using your dishwasher for the first time:• Ensure that the electrical and water connections comply with the installation instructions • Remove all packaging from inside the appliance • Set the water softener level• Pour 1 litre of water into the salt ...
Page 13 - Filling with rinse aid
13 5. Replace the cap tightly turning it clockwise until it stops with a click. Do not worry if water overflows from the unit when filling with salt, this is quite normal. The salt indicator light on the control panel can remain on for 2-6 hours after the salt has been replenished, assuming the dish...
Page 15 - Daily use; Loading cutlery and dishes
15 Daily use • Check if it's necessary to refill with dishwasher salt or rinse aid. • Open the door and slide out the baskets to load the dishes. • Load cutlery and dishes into the dishwasher. • Fill with dishwasher detergent.• Select a wash programme suitable for the cutlery and dishes. • Start the...
Page 16 - Using the baskets; Lower basket
16 Using the baskets The dishwasher has a capacity of 10 place-settings, including serving dishes. Lower basket The lower basket receives the full force of the lower spray arm, and should therefore be used for the "toughest" items with a heavier degree of soiling. All types and combinations ...
Page 17 - Cutlery basket
17 Cutlery basket The cutlery should be arranged in an orderly manner inside the basket, with the handles pointing downwards. Take care during loading to avoid injury from the knife blades. The basket is suitable for all types of cutlery, except those long enough to interfere with the upper spray ar...
Page 19 - Use of detergent
19 Adjusting the upper basket The upper basket can be adjusted in two positions , according to the user's needs and according to the height of the dishes in the lower basket. Proceed as follows:• turn the retainer E on both runners, right and left, through 90°; • remove the basket;• lift the basket ...
Page 20 - Multi tab function
20 3. All programmes with prewash need an additional detergent dose (5/10 g) that must be placed in the prewash detergent chamber (2). This detergent will be used during the prewash phase. When using detergent tablets; place the tablet in compartment (1). Detergent tablets Detergent tablets from dif...
Page 21 - Maintenance and cleaning; Cleaning the spray arms
21 Maintenance and cleaning Cleaning the water intake filter Warning! Before carrying out any work, always unplug the appliance from the electrical supply or switch off the all-pole disconnection device. The water intake filter A located at the outlet of the water supply tap needs to be cleaned peri...
Page 23 - Something not working
23 Something not working The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described, without calling out an engineer.Switch off the appliance and carry out thefollow...
Page 26 - Technical data; Unpacking; Fitting under a counter
26 For the in staller Technical data Installation Warning! It is dangerous to alter the specifications or attempt to modify this product in any way. This appliance is heavy. Care should be taken when moving it. Care must be taken to ensure that the appliance does not stand on the electrical supply c...
Page 27 - Levelling
27 Proceed as follows:Remove the machine’s worktop by unscrewing the two rear retaining screws (1), pull the worktop from the back of the machine (2) and slide out the front slots, lifting the worktop (3). Insert the machine after adjusting the levelling with the adjustable feet. When inserting the ...
Page 28 - Water connections; Water inlet connection
28 Water connections Water inlet connection This appliance must be connected to a coldwater supply.For making the connection itself, the coupling nut fitted to the machine’s inlet hose is designed to screw onto a 3/4" gas thread spout or to a purpose made quick-coupling tap such as the Press-blo...
Page 29 - Water drain connection
29 Water drain connection The end of the drain hose can be connected in the following ways:1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. 2. To a stand pipe provided with venthole, minimum internal...
Page 30 - Electrical connection; Fuse replacement
30 Electrical connection Warning! Safety standards require the appliance to be earthed. Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be...
Page 31 - Repairs - after sales service; Spare parts
31 Repairs - after sales service Your appliance comes with a three year warranty.If it is not working correctly; consult the fault finding guides within this instruction book (Something not working). If a fault occurs which you can not resolve through following the advice and information contained w...
