John Lewis JLDWS 907 - Manuals

6 Description of the appliance 1. Upper basket2. Water hardness dial3. Salt container4. Detergent dispenser5. Rinse aid dispenser 6. Rating plate7. Filters8. Lower spray arm9. Upper spray arm10. Worktop

7 The control panel All the dishwasher controls are grouped on the upper panel. Switch-on, programming, switch-off etc. procedures are only possible when the door is open. 1. On/Off buttonPressing this button energises the appliance. 2. Selected programme indicator lightsIllumination of this light d...

8 Setting mode To select the most suitable programme for the dishes to be washed refer to the table below, which indicates the most appropriate programme according to dish type and degree of soiling. After using the table to identify the most appropriate washing programme:• press the ON/OFF button (...

9 Washing programmes Before starting a washing programme make sure that:- The water supply tap is open.- The correct amount of detergent has been added to the dispenser.- The baskets have been correctly loaded.- The spray arms are able to rotate freely and without obstruction.- The dishwasher door i...

11 When the dishwasher is first installed Before using your dishwasher for the first time:• Ensure that the electrical and water connections comply with the installation instructions • Remove all packaging from inside the appliance • Set the water softener level• Pour 1 litre of water into the salt ...

13 5. Replace the cap tightly turning it clockwise until it stops with a click. Do not worry if water overflows from the unit when filling with salt, this is quite normal. The salt indicator light on the control panel can remain on for 2-6 hours after the salt has been replenished, assuming the dish...

15 Daily use • Check if it's necessary to refill with dishwasher salt or rinse aid. • Open the door and slide out the baskets to load the dishes. • Load cutlery and dishes into the dishwasher. • Fill with dishwasher detergent.• Select a wash programme suitable for the cutlery and dishes. • Start the...

16 Using the baskets The dishwasher has a capacity of 10 place-settings, including serving dishes. Lower basket The lower basket receives the full force of the lower spray arm, and should therefore be used for the "toughest" items with a heavier degree of soiling. All types and combinations ...

17 Cutlery basket The cutlery should be arranged in an orderly manner inside the basket, with the handles pointing downwards. Take care during loading to avoid injury from the knife blades. The basket is suitable for all types of cutlery, except those long enough to interfere with the upper spray ar...

19 Adjusting the upper basket The upper basket can be adjusted in two positions , according to the user's needs and according to the height of the dishes in the lower basket. Proceed as follows:• turn the retainer E on both runners, right and left, through 90°; • remove the basket;• lift the basket ...

20 3. All programmes with prewash need an additional detergent dose (5/10 g) that must be placed in the prewash detergent chamber (2). This detergent will be used during the prewash phase. When using detergent tablets; place the tablet in compartment (1). Detergent tablets Detergent tablets from dif...

21 Maintenance and cleaning Cleaning the water intake filter Warning! Before carrying out any work, always unplug the appliance from the electrical supply or switch off the all-pole disconnection device. The water intake filter A located at the outlet of the water supply tap needs to be cleaned peri...

23 Something not working The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described, without calling out an engineer.Switch off the appliance and carry out thefollow...

26 For the in staller Technical data Installation Warning! It is dangerous to alter the specifications or attempt to modify this product in any way. This appliance is heavy. Care should be taken when moving it. Care must be taken to ensure that the appliance does not stand on the electrical supply c...

27 Proceed as follows:Remove the machine’s worktop by unscrewing the two rear retaining screws (1), pull the worktop from the back of the machine (2) and slide out the front slots, lifting the worktop (3). Insert the machine after adjusting the levelling with the adjustable feet. When inserting the ...

28 Water connections Water inlet connection This appliance must be connected to a coldwater supply.For making the connection itself, the coupling nut fitted to the machine’s inlet hose is designed to screw onto a 3/4" gas thread spout or to a purpose made quick-coupling tap such as the Press-blo...

29 Water drain connection The end of the drain hose can be connected in the following ways:1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. 2. To a stand pipe provided with venthole, minimum internal...

30 Electrical connection Warning! Safety standards require the appliance to be earthed. Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be...

31 Repairs - after sales service Your appliance comes with a three year warranty.If it is not working correctly; consult the fault finding guides within this instruction book (Something not working). If a fault occurs which you can not resolve through following the advice and information contained w...