John Deere PC20864 - Manual

Page 3 - Overview; The GreenStar System; Installation Instructions

Installation Instructions OUO6050,0000A49 –19–25MAY07–1/1 Overview AutoTrac Universal system requires the GreenStarsystem to operate. The two systems consist of thefollowing components: • GreenStar– Receiver– Processor– Display– Harness • AutoTrac Universal– AutoTrac Universal Steering Wheel– Shaft ...

Page 4 - AutoTrac Universal 200 Steering Kit

Installation Instructions OUO6050,0000A4A –19–15JUN07–1/1 AutoTrac Universal 200 Steering Kit PC9156B –UN–29MAY07 A—AutoTrac Universal D—Cover Used with F—Steering Wheel Cap Cover I—Wrench Steering Wheel Anti-Rotation Bracket (M) G—Adhesive Harness Clips J—On/Off Switch (Europe B—AutoTrac Universal ...

Page 5 - Installation of the AutoTrac Universal system

Installation Instructions OUO6050,0000A4C –19–25MAY07–1/1 Installation of the AutoTrac Universal system Installation involves the following steps: 1. Remove the Steering Wheel.2. Attach Bushing3. Attach Anti-Rotational Device4. Attach AutoTrac Universal Steering Wheel to Steering Shaft 5. Attach Aut...

Page 6 - Attach Bushing; NOTE: Be sure that the hole for lock washer is facing; Attach Anti-Rotational Devices; There are different types of anti-rotational devices.

Installation Instructions OUO6050,0000A4E –19–25MAY07–1/1 Attach Bushing PC9009 –UN–04APR06 A—BushingB—Snap Ring A range of bushings have been created to allow theAutoTrac Universal Steering Wheel to fit on shafts thatvary in style and dimension. Select the proper bushingand insert it into the AutoT...

Page 7 - IMPORTANT: To allow steering wheel to telescope; Attach steering unit to vehicle steering shaft by

Installation Instructions OUO6050,0000A4F –19–31MAY07–2/3 PC8750 –UN–19OCT05 A—U-bolt, Saddle, Spacer, B—Anti-Rotation Rod C—Screws E—Screw Pillow-Block and Nuts Assembly D—Cover (1) Clamp and Rod Anti-Rotational Device IMPORTANT: To allow steering wheel to telescope normally, install assembly (A) n...

Page 8 - IMPORTANT: Use of shims will eliminate the

Installation Instructions OUO6050,0000A4F –19–31MAY07–3/3 PC9154A –UN–21DEC06 PC8771 –UN–14OCT05 Shims A—Anti-Rotation Bracket B—Steering Unit C—Screw (2 Used) (2) Console Anti-Rotation Device Attach anti-rotation bracket (A) to steering unit (B) withscrews (C). Use slots to move bracket snug agains...

Page 9 - IMPORTANT: Tighten all hardware to proper torque

Installation Instructions OUO6050,0000A51 –19–25MAY07–1/1 Attach AutoTrac Universal Steering Wheel toShaft PC9011 –UN–04APR06 A—Lock WasherB—NutC—WasherD—Telescoping KnobE—WasherF—Telescoping Rod NutG—Cap Position AutoTrac Universal steering wheel on steeringcolumn. The hardware shown is specific to...

Page 10 - Europe Only—Attach On/Off Switch

Installation Instructions OUO6050,0000A53 –19–25MAY07–1/1 Europe Only—Attach On/Off Switch PC8896 –UN–02JAN06 A—9-pin harness from AutoTrac Universal Steering Wheel B—On/Off SwitchC—AutoTrac Universal Harness Connect 9-pin harness from AutoTrac Universal steeringwheel (A) to On/Off switch (B). Conne...

Page 11 - GreenStar Ready Vehicles; Implement connector can; not; be used as the

Installation Instructions OUO6050,0000A54 –19–25MAY07–1/3 Attach AutoTrac Universal Harness toGreenStar Harness PC8718 –UN–19OCT05 Routing and Installation View A—CAN Bus ExtensionB—Implement Connector Depending on your vehicle’s harness configuration, theAutoTrac Universal harness will be connected...

Page 12 - Non-GreenStar Ready Vehicles; NOTE: Depending upon the type of harness encountered,

Installation Instructions OUO6050,0000A54 –19–25MAY07–2/3 PC8778 –UN–14OCT05 A—TerminatorB—2-pin ConnectorC—4-pin ConnectorD—ATU Harness Connectors a. Locate terminator with 2- and 4- pin connector.b. Disconnect terminator connections. OUO6050,0000A54 –19–25MAY07–3/3 PC8779 –UN–18OCT05 c. Connect AT...

Page 13 - Attach Seat Switch Harness; NOTE: For John Deere Tractors equipped with an

Installation Instructions OUO6050,0000A56 –19–25MAY07–1/1 Attach Seat Switch Harness PC8777 –UN–18OCT05 PC8721 –UN–23AUG05 A—Seat Switch Harness B—AutoTrac Universal C—Connectors from Harness Connector to AutoTrac Harness to Seat Switch to Seat Switch Universal Harness Connector NOTE: For John Deere...

Page 14 - Route and Secures All Harnesses; Thoroughly clean surface with JD All-Purpose Cleaner

Installation Instructions OUO6050,0000A57 –19–25MAY07–1/1 Route and Secures All Harnesses PC8873 –UN–22NOV05 In order to prevent interference with operator and cabcontrols secure and route harnesses with the providedadhesive clips. 1. Thoroughly clean surface with JD All-Purpose Cleaner (TY25683) an...

Page 15 - Activate AutoTrac Universal; IMPORTANT: AutoTrac Universal serial number; NOTE: Activation code may come with leading zeroes; Setup System; See ATU Operator’s Manual for system setup.

Installation Instructions OUO6050,0000A58 –19–21JUN07–1/1 Activate AutoTrac Universal PC8782 –19–19OCT05 PC10056 –UN–21JUN07 No ATU Activation, ATU has not been activated. Enter an activation code below or disconnect the ATU unit to access the GreenStar 2 Pro Application. AutoTrac Universal has to b...

Page 18 - Connect to a GreenStar Harness Terminator

Installation Instructions OUO6050,0000A55 –19–31MAY07–6/6 PC8731 –UN–30AUG05 A—ScrewB—SpacerC—PanelD—Panel 7. Reinstall panels (C and D), retain with spacer (B) and screw (A). 8. Reinstall fuse panel cover and console wrap. OUO6050,0000A7E –19–31MAY07–1/2 Connect to a GreenStar Harness Terminator PC...

Page 19 - Auxiliary Resume Switch; Theory of Operation

Installation Instructions OUO6050,0000A7E –19–31MAY07–2/2 PC8779 –UN–18OCT05 3. Connect ATU harness into terminator connectors and remaining GreenStar harness connectors into theremaining ATU harness connectors as shown. OUO6050,0000A80 –19–05JUL07–1/3 Auxiliary Resume Switch PC9303B –UN–13SEP06 A—R...

Page 20 - Switch Cover Direct Mounting:

Installation Instructions OUO6050,0000A80 –19–05JUL07–2/3 PC9304 –UN–11AUG06 Auxiliary Resume Switch A—SwitchB—Front CaseC—Rear CaseD—Screws that hold Case Together (4 Used)E—Bolts that connect Case to Vehicle (2 Used) Switch Cover Direct Mounting: 1. Find a suitable location in the cab or operator’...

John Deere PC20864 - Manual

Table of Contents:

Summary

Other John Deere Models