Page 3 - Recognize Safety Information; IMPORTANT: AutoTrac Universal is to be installed; Average Installation Time; Installation Instructions
Installation Instructions OUO6050,000128E –19–08SEP05–1/1 Recognize Safety Information T81389 –UN–07DEC88 This is a safety-alert symbol. When you see this symbolon your machine or in this manual, be alert to potential forpersonal injury. Follow recommended precautions and safe operatingpractices. OU...
Page 4 - AutoTrac Universal Kit
Installation Instructions OUO6050,00012B1 –19–13OCT05–1/1 AutoTrac Universal Kit PC8747 –UN–08SEP05 A—Steering Wheel/Motor D—ATU Cover Used with G—Tapered Spline Shaft K—Anti-Rotational Brackets Assembly Anti-Rotation Bracket (M) Bushing for Consoles B—AutoTrac Universal E—Steering Wheel Knob (Used ...
Page 5 - Install GreenStar Common Components; NOTE: If routing GreenStar harness through right-hand; Install AutoTrac Universal Steering Kit; Remove steering wheel from vehicle that will be
Installation Instructions OUO6050,0001293 –19–08SEP05–1/1 Install GreenStar Common Components Install StarFire Receiver, GreenStar Display, MobileProcessor, and GreenStar wiring harness (if needed).(See GREENSTAR WIRING HARNESS AND STARFIRECAB BRACKET installation instructions.) NOTE: If routing Gre...
Page 6 - Select proper bushing according to splines on removed; NOTE: Be sure that hole for lock washer is facing; Attaching ATU to Vehicle Console; Clamp and Rod
Installation Instructions OUO6050,000128D –19–20OCT05–2/2 PC8715 –UN–07SEP05 A—Tapered BushingB—Straight Spline BushingC—Snap Ring 2. Select proper bushing according to splines on removed steering wheel. Insert the bushing with the correctspline type into center of steering wheel/motorassembly and i...
Page 7 - Installing Clamp and Rod Anti-Rotation Bracket; IMPORTANT: To allow steering wheel to telescope; Attach steering unit to vehicle steering shaft by
Installation Instructions OUO6050,00012BA –19–13OCT05–1/2 Installing Clamp and Rod Anti-Rotation Bracket PC8750 –UN–19OCT05 Ex. - JD4XX0, JD8X60, JD8X70 Series Tractors A—U-bolt, Saddle, Spacer, B—Anti-Rotation Rod C—Screws E—Screw Pillow-Block and Nuts Assembly D—Cover IMPORTANT: To allow steering ...
Page 8 - Position steering unit on steering column.
Installation Instructions OUO6050,00012BA –19–13OCT05–2/2 PC8751 –UN–08SEP05 Ex. - JD4XX0, JD8X60, JD8X70 Series Tractors A—Lock Washer C—Washer E—Washer G—Cap B—Nut D—Telescoping Knob F—Telescoping Rod Nut IMPORTANT: Tighten all hardware to proper torque according to vehiclemanufacturer’s specifica...
Page 9 - Installing Straight Anti-Rotation Bracket
Installation Instructions OUO6050,00012B9 –19–14OCT05–1/2 Installing Straight Anti-Rotation Bracket PC8752 –UN–08SEP05 Ex. - JD6XX0, Small Frame JD7XX0 Tractors A—Anti-Rotation Bracket D—Lock Washer G—Telescoping Knob I—Telescoping Rod Nut B—Steering Unit E—Nut H—Washer J—Cap C—Screw (2 Used) F—Wash...
Page 10 - Position steering unit on steering column.; when original steering wheel was removed.
Installation Instructions OUO6050,00012B9 –19–14OCT05–2/2 PC8755 –UN–20OCT05 Anti-Rotation Bracket for JD6XX0, Small Frame JD7XX0 Tractors 1. Attach anti-rotation bracket (A) to steering unit (B) with screws (C). Use slots to move bracket snug againstcolumn. 2. Position steering unit on steering col...
Page 11 - Installing Angled Anti-Rotational Bracket
Installation Instructions OUO6050,00012B8 –19–14OCT05–1/2 Installing Angled Anti-Rotational Bracket PC8753 –UN–08SEP05 Ex. - Large Frame JD7XX0, JD8XX0, JD9XX0 A—Anti-Rotation Bracket D—Lock Washer G—Telescoping Knob I—Telescoping Rod Nut B—Steering Unit E—Nut H—Washer J—Cap C—Screw (2 Used) F—Washe...
Page 12 - Connect Steering Motor Harness
Installation Instructions OUO6050,00012B8 –19–14OCT05–2/2 PC8754 –UN–19OCT05 Anti-Rotation Bracket for Large Frame JD7XX0, JD8XX0, JD9XX0 1. Attach anti-rotation bracket (A) to steering unit (B) with screws (C). Use slots to move bracket snug againstcolumn. 2. Position steering unit on steering colu...
Page 13 - Connect ATU Harness to GreenStar Harness; GreenStar Ready Vehicles
Installation Instructions OUO6050,0001471 –19–20OCT05–1/2 Connect ATU Harness to GreenStar Harness PC8718 –UN–19OCT05 Routing and Installation View A—AutoTrac Universal Connection Location for the CAN Bus Extension B—AutoTrac Universal Connection Location for the Implement Connector Depending on you...
Page 14 - ATU Harness Connection Locations; Harness connection location for implement connectors
Installation Instructions OUO6050,0001477 –19–20OCT05–1/1 ATU Harness Connection Locations Depending on your vehicle’s configuration, refer toone of the following sections for additional harnessconnection information. • Harness connection location in GreenStar Ready tractorside consoles • Harness co...
Page 15 - Locate and disconnect GreenStar wiring harness 2-; NOTE: Connectors may be difficult to locate as they are
Installation Instructions OUO6050,0001291 –19–20OCT05–2/6 PC8719 –UN–23AUG05 NOTE: Some vehicles may allow enough space for connectors to slide down between window andside console. OUO6050,0001291 –19–20OCT05–3/6 PC8774 –UN–14OCT05 2- and 4- pin Connectors A—2-pin ConnectorB—4-pin Connector 3. Locat...
Page 17 - Connect AutoTrac Universal harness to implement
Installation Instructions OUO6050,0001294 –19–20OCT05–1/4 Harness Connection Location for ImplementConnectors PC8730 –UN–19OCT05 A—AutoTrac Universal Connection Location for the Implement Harness OUO6050,0001294 –19–20OCT05–2/4 PC8780 –UN–18OCT05 A—2-pin connectorB—4-pin connectorC—Implement Connect...
Page 18 - Route AutoTrac Universal harness through back of cab
Installation Instructions OUO6050,0001294 –19–20OCT05–4/4 PC8720 –UN–23AUG05 3. Route AutoTrac Universal harness through back of cab window and connect to AutoTrac Universal Steeringmotor. OUO6050,0001472 –19–13OCT05–1/2 Connecting to a GreenStar HarnessTerminator PC8778 –UN–14OCT05 A—TerminatorB—2-...
Page 19 - Connect ATU harness into terminator connectors and; Connect Seat Switch Harness; NOTE: For John Deere vehicles equipped with an; To connect seat switch, begin by connecting seat
Installation Instructions OUO6050,0001472 –19–13OCT05–2/2 PC8779 –UN–18OCT05 3. Connect ATU harness into terminator connectors and remaining GreenStar harness connectors into theremaining ATU harness connectors as shown. OUO6050,0001473 –19–19OCT05–1/2 Connect Seat Switch Harness PC8777 –UN–18OCT05 ...
Page 20 - Secure and Route all Harness
Installation Instructions OUO6050,0001473 –19–19OCT05–2/2 PC8721 –UN–23AUG05 2. Connect seat switch harness connector to seat switch. This harness includes two sets of connectors, use onlythe set of connectors that corresponds with thevehicle’s seat switch. Disregard the unused set. NOTE: Seat Switc...
Page 21 - Activating AutoTrac Universal; IMPORTANT: AutoTrac Universal system serial; Optional Use of Shims; Install shims as needed as shown in photo.; IMPORTANT: Use of shims will eliminate the ability of
Installation Instructions OUO6050,0001476 –19–18OCT05–1/1 Activating AutoTrac Universal PC8782 –19–19OCT05 AutoTrac Universal has to be activated by a 3-digitactivation code the first time that it is powered up. Thecode can be attained by: • Calling the AMS Customer Care Center at1-888-GRN-STAR (888...
Page 22 - System Setup
Installation Instructions OUO6050,00012B3 –19–08SEP05–1/1 System Setup (See GREENSTAR GUIDANCE PARALLEL TRACKINGAND AUTOTRAC ASSISTED STEERING SYSTEMSOperator’s Manual for system setup.) PC20577 (22MAR06) 20 Installation Instructions 032206 PN=22