JL Audio J2500.1 - Manual
JL Audio J2500.1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – JL Audio®; Planning Your installation
- Page 3 – Power ConneCtions; ProduCt desCriPtion; Disconnect the negative battery post
- Page 4 – “outPut PolaritY” Control; insert it into the “Remote” receptacle on the; “amPliFier inPuts”
- Page 6 – general specifications:; Recommended Fuse Value:; bass boost; Following the directions below will allow the; necessary equipment; midrange application). Do not use attenuated; the nine-step Procedure; amplifier’s speaker output connectors.; target aC Voltage
- Page 7 – “my amplifier turns on, but there is no output”; ” terminals; “my amplifier’s output fluctuates when i tap on it or hit a bump”; contact with the input jacks on the amplifier.; aPPendix C: troublesHooting
- Page 9 – if you need service on your Jl audio product:; authorized by JL Audio with a valid return authorization number.; Jl audio Customer service; (do not send product for repair to this address); international warranties:; by that country’s distributor and not by JL Audio, Inc.
Thank you for purchasing a JL Audio amplifier for
your automotive sound system.
Your amplifier has been designed and manufactured to exacting
standards in order to ensure years of musical enjoyment in your vehicle.
For maximum performance, we highly recommend that you have
your new amplifier installed by an authorized JL Audio dealer. Your
authorized dealer has the training, expertise and installation equipment
to ensure optimum performance from this product. Should you
decide to install the amplifier yourself, please take the time
to read this manual thoroughly so as to familiarize yourself
with its installation requirements and setup procedures.
If you have any questions regarding the instructions in this
manual or any aspect of your amplifier’s operation, please contact your
authorized JL Audio dealer for assistance. If you need further assistance,
please call our Technical Support Department
at (954) 443-1100 during business hours.
owner’s manual
500W Monoblock Subwoofer Amplifier
J2_500_1_MAN_CH.indd 1
4/22/09 11:24:38 AM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 JL Audio® 3 Planning Your installation It is important that you take the time to read this manual and that you plan out your installation carefully. The following are some considerations that you must take into account when planning your installation. Cooling efficiency Considerations: The outer s...
4 JL Audio® 5 Power ConneCtions Before installing the amplifier, disconnect the negative (ground) wire from the vehicle’s battery. This will prevent accidental damage to the system, the vehicle and your person during installation. Made in China Speaker Output (Mono) FUSES + 12VDC 15A 15A 15A 15A Rem...
6 JL Audio® 7 “inPut sensitiVitY” (gain) adJustment Located next to the input connectors is a rotary control labeled “Input Sens.”. This rotary control can be used to match the source unit’s output voltage to the input stage of the amplifier for maximum clean output. Reversed | Normal Output Polarit...
