JL Audio 98100 - User Manual
JL Audio 98100 Car Sound System – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – with your vehicle’s safety equipment (air bags, seat belt systems,; What’s Included; all housed within a single chassis.
- Page 4 – Installation Procedure/Making Connections; The FiXTM 82 uses removable plugs for making power and signal input; OEM Input connections.; dangerous short circuit.
- Page 5 – This page intentionally left blank
- Page 6 – FIXTM 82 Top View
- Page 8 – Power Connections; used to make the connections below.; Plug; Po; Never make power connections with a “live” wire. Always disconnect
- Page 9 – perform the installation.
- Page 10 – to these factory amplifiers, the audio outputs will mute.; Output Connections; of your audio system.; Optical Digital Output:; behavior definitions.
- Page 11 – which option is best suited for your specific system.; Setting; Bypass EQ / Calibrate Button; The Bypass EQ mode can be used to defeat the equalization
- Page 12 – system are not triggered during the calibration process.
- Page 13 – LED Color
- Page 14 – Troubleshooting; Problem
- Page 15 – Specifications; Electrical Specifications
- Page 16 – If you need service on your JL AUDIO product:; covered under warranty.; JL Audio Customer Service:; (Do not send product for repair to this address); International Warranties:; by that country’s distributor and not by JL Audio, Inc.
Thank you for purchasing a JL Audio FiX™ OEM
interface / processor for your automotive sound system.
This product has been designed and manufactured to exacting
standards in order to ensure years of musical enjoyment in your vehicle.
For maximum performance, we highly recommend that you have your
FiX™ 82 installed by an authorized JL Audio dealer. Your authorized
dealer has the training, expertise and installation equipment to ensure
optimum performance from this product without compromising your
vehicle’s functionality. Due to the complexity of modern vehicle systems,
we do not recommend self-installation unless you have extensive
experience in automotive electrical systems. Should you decide to install
this product yourself, please take the time to read this manual
thoroughly to familiarize yourself with its installation requirements
and setup procedures.
If you have any questions regarding the instructions in this manual or
any aspect of the product’s operation, please contact your authorized JL
Audio dealer for assistance. If you need further assistance, please contact
the JL Audio Technical Support Department at [email protected]
or call (954) 443–1100 during business hours.
OWNER’S MANUAL
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Protect Your Hearing! We value you as a long-term customer. For that reason, we urge you to practice restraint in the operation of this product so as to not damage your hearing and that of others in your vehicle. Studies have shown that continuous exposure to high sound pressure level can lead to pe...
Installation Procedure/Making Connections The FiX™ 82 uses removable plugs for making power and signal input connections. Receptacles in each plug accept up to 16 AWG wire. To attach wires to the plug, use a small flathead screwdriver to back out the set screws. Strip 1/4 inch (6 mm) of insulation f...
