JL Audio 92117 - Manuals

Step 6: Connect the speaker wires andplace the W7 into the enclosure Connect the positive wire to the red terminal and the negative wire to the black terminal of the W7 (picture 6a). The 13W7 (not shown) has dual voice coils and must be wired with its coils in series or in parallel. Once the speaker...

Infrasonic Filter: Turn “Off ” for Sealed Enclosure . Turn “On” for Ported Enclosure and set the knob to “25” Hz. Bass EQ: Generally not necessary in W7 applications (we recommend defeating it by switching the “Bass EQ” switch to “Off ” ). May be used with Remote Bass Control to provide some user co...

Grille Clearance: 2.7 in. (69 mm) from the bottom of the mounting flange to the lowest inside surface of the grille. Displacement: 0.21 cu. ft. (5.9 ltrs) Net Weight: 52 lbs. (23.6 kg) Mounting Hardware: Twelve #12 x 1.75" long clear, zinc-plated steel Phillips pan-head sheet metal screws (inclu...

What follows is a simple method for accurately setting the input sensitivity (commonly referred to as “gain”) of JL  Audio subwoofer amplifiers. You will need the following equipment: • AC Voltmeter (digital display type) • A CD with a sine-wave test tone recorded at 0dB reference level in the frequ...

JL AUDIO warrants this speaker to be free of defects in materials and workmanship for a period of one (1) year from the original date of purchase. This warranty is not transferrable and applies only to the original purchaser of the product from an authorized JL AUDIO dealer. Should service be necess...