Page 2 - IMPORTANT SAFETY INSTRUCTIONS; read before the subwoofer is operated.; ) Heed Warnings — All warnings on the subwoofer and in the operating; instructions should be followed.; ) Follow Instructions — All operating and use instructions should; and the point where they exit the subwoofer.; WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,; DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.; CAUTION; RISK OF ELECTRIC SHOCK; CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE; AMP PANEL OR SPEAKER. NO USER SERVICEABLE PARTS INSIDE. REFER
| e110 & e112 Page 2 IMPORTANT SAFETY INSTRUCTIONS 1) Read the Instructions — All safety and operating instructions should be read before the subwoofer is operated. 2) Retain the Instructions — The safety and operating instructions should be retained for future reference. 3) Heed Warnings — All ...
Page 4 - FCC COMPLIANCE STATEMENT; correct the interference by one or more of the following measures:; TABLE OF CONTENTS
| e110 & e112 Page 4 FCC COMPLIANCE STATEMENT NOTE: This equipment has been tested and found to comply with the limits of Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, use...
Page 5 - your; PRODUCT OVERVIEW; If you require assistance, we urge you to contact your authorized; IMPORTANT; IMPORTANT! IT IS A VERY GOOD IDEA TO READ THE NEXT SECTION; BEFORE UNPACKING YOUR E-SUB. UNPACKING THE SUBWOOFER NEAR
Page 5 | e110 & e112 We sincerely thank you for your purchase and invite you to read this manual thoroughly in order to achieve the highest level of performance with your E-Sub subwoofer system. Enjoy. PRODUCT OVERVIEW JL Audio E-Sub subwoofers combine a state-of-the-art JL Audio subwoofer drive...
Page 6 - PLACING YOUR E-SUB IN YOUR LISTENING ROOM:; We recommend that you begin by placing your E-Sub in the front of the; room, on the floor, near the front left or right speaker. Placing the; If you are planning to install your E-Sub
| e110 & e112 Page 6 PLACING YOUR E-SUB IN YOUR LISTENING ROOM: Your listening room or theater is an integral part of your sound reproduction system. The physical dimensions of the room and its furnishings, materials, doors and windows play an important role in defining how your system sounds. W...
Page 7 - SMOO; SMOO; COMPROMISED SEATING POSITIONS; BEST SEATING POSITIONS; Recommended Floor Placement Options for One E-Sub
Page 7 | e110 & e112 M O R E I N T E N S E SMOOTHER RECOMMENDED SUBWOOFER PLACEMENT ZONES (For Single Subwoofer) SMOO THER SMOO THER M O R E I N T E N S E SMOOTHER SMOO THER SMOO THER COMPROMISED SEATING POSITIONS (Results in weaker, uneven bass performance) BEST SEATING POSITIONS (Most accurate...
Page 8 - SPECIAL CONSIDERATIONS FOR BUILT-IN INSTALLATIONS
| e110 & e112 Page 8 SPECIAL CONSIDERATIONS FOR BUILT-IN INSTALLATIONS The E-Sub can be integrated into custom cabinetry by following a few simple guidelines. 1) Allow 4 inches (10 cm) of clear space behind the E-Sub ’s amp panel for adequate cooling and connector clearance. 2) On all other side...
Page 9 - Recommended Subwoofer Placement Options for Two E-Subs
Page 9 | e110 & e112 Recommended Subwoofer Placement Options for Two E-Subs Using Two E-Subs When using two E-Subs , try placement near the front corners of the room, at diagonally-opposite corners of the room, or at the center points of opposing walls as shown at right. Experimentation with sub...
Page 11 - Detailed instructions on unpacking the subwoofer:; Remove the protective cloth cover and place in the carton.; Unpack this box close to where the; Now that you have determined your; IMPORTANT: DUE TO THE WEIGHT OF THE
Page 11 | e110 & e112 Detailed instructions on unpacking the subwoofer: 1. Place the carton on the floor near its intended location in the room. 2. Open the top of the carton (observe markings on carton) and remove the manual and power cord. 3. The subwoofer is packed upside-down. Lift the styro...
Page 12 - Top-Mounted Control Panel; The E110 and E112 have identical layouts.
Page 12 Top-Mounted Control Panel The labeled Figure below depicts the top-mounted control panel of the E-Sub subwoofer. The E110 and E112 have identical layouts. Power page 14 Master Level page 14 Crossover Switch page 15 Crossover freq. (Hz) page 15 phase (deg.) page 16 Polarity page 15
Page 13 - Rear Connection Panel (120V Model Shown); The labeled Figure below depicts the rear panel of the
CH. 2 (R) Grounded Isolated CH. 1 (L) HIGH LEVEL INPUTS SERIAL NUMBER: Warranty void if serial number is removed, altered or defaced. LINE OUTPUTS L L R R LINE INPUTS Built in USA with domestic and imported components Page 13 | e110 & e112 Rear Connection Panel (120V Model Shown) The labeled Fig...
Page 14 - TOP-MOUNTED CONTROLS IN DETAIL; Top-Panel Power Switch and Indicator LED
| e110 & e112 Page 14 TOP-MOUNTED CONTROLS IN DETAIL Top-Panel Power Switch and Indicator LED The “Power” switch on the top panel determines the operational readiness of the E-Sub subwoofer and should be the only switch used to turn the E-Sub on and off during typical use. The top-panel “Power” ...
Page 16 - Phase Knob; Once your
| e110 & e112 Page 16 Phase Knob The “phase (deg.)” control knob allows the user to adjust the timing of the subwoofer output relative to the main speakers. The “phase (deg.)” control will primarily affect the small frequency range around the crossover point between your subwoofer and satellite ...
Page 17 - only the “Line Inputs”; High Level Inputs; The Left and Right inputs on the E-Sub are
Page 17 | e110 & e112 CH. 2 (R) Grounded Isolated CH. 1 (L) HIGH LEVEL INPUTS SERIAL NUMBER: Warranty void if serial number is removed, altered or defaced. LINE OUTPUTS L L R R LINE INPUTS Built in USA with domestic and imported components CH. 2 (R) Grounded Isolated CH. 1 (L) HIGH LEVEL INPUTS ...
Page 19 - SYSTEM CONNECTION DIAGRAM 1:
Page 19 | e110 & e112 WARNING WARNING! TURN OFF THE E-SUB(S) AND ALL OTHER EQUIPMENT IN THE SYSTEM BEFORE MAKING OR CHANGING ANY CONNECTIONS! CH. 2 (R) Grounded Isolated CH. 1 (L) HIGH LEVEL INPUTS LINE OUTPUTS L L R R LINE INPUTS SUB REAR REAR CENTER FRONT FRONT R L PRE OUT E-SUB REAR PANEL REC...
Page 20 - SYSTEM CONNECTION DIAGRAM 2:
| e110 & e112 Page 20 IMPORTANT WARNING! TURN OFF THE E-SUB(S) AND ALL OTHER EQUIPMENT IN THE SYSTEM BEFORE MAKING OR CHANGING ANY CONNECTIONS! WARNING SYSTEM CONNECTION DIAGRAM 2: Multiple E-Subs to Home Theater Receiver or Home Theater Preamp/ Processor Most home theater receivers and preamp/p...
Page 21 - SYSTEM CONNECTION DIAGRAM 3:
Page 21 | e110 & e112 WARNING WARNING! TURN OFF THE E-SUB(S) AND ALL OTHER EQUIPMENT IN THE SYSTEM BEFORE MAKING OR CHANGING ANY CONNECTIONS! CH. 2 (R) Grounded Isolated CH. 1 (L) HIGH LEVEL INPUTS LINE OUTPUTS L L R R LINE INPUTS R R L L INPUTS SATELLITE AMPLIFIER TO SATELLITE SPEAKERS (L) (R) ...
Page 22 - SYSTEM BEFORE MAKING OR CHANGING ANY CONNECTIONS!
| e110 & e112 Page 22 SYSTEM CONNECTION DIAGRAM 4: Two E-Subs in Stereo to Two-Channel Audio System When connecting two E-Sub s in stereo to a two-channel audio system you will assign one E-Sub to the left channel and the other one to the right channel. You will engage each E-Sub’s active crosso...
Page 23 - SYSTEM CONNECTION DIAGRAM 5:
Page 23 | e110 & e112 WARNING WARNING! TURN OFF THE E-SUB(S) AND ALL OTHER EQUIPMENT IN THE SYSTEM BEFORE MAKING OR CHANGING ANY CONNECTIONS! CH. 2 (R) Grounded Isolated CH. 1 (L) HIGH LEVEL INPUTS LINE OUTPUTS L L R R LINE INPUTS OR OR CH. 2 (R) Grounded Isolated CH. 1 (L) HIGH LEVEL INPUTS LIN...
Page 24 - On your Home Theater Receiver or Preamp/Processor:
| e110 & e112 Page 24 RECOMMENDED SETUP PROCEDURES 1) Preparation for Setup Process: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-252) Level Setting: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263)...
Page 25 - “Polarity” Switch
Page 25 | e110 & e112 On the E-Sub’s Top Panel: Please turn off the home theater receiver or preamp/processor to make these adjustments. 1. “Power” Switch Flip each E-Sub’s “Power” switch to the “On” position. 2. “Crossover” Switch and “crossover freq. (Hz)” knob If your home theater receiver/pr...
Page 26 - RECOMMENDED SETUP PROCEDURES; Subwoofer System Setup:; FUTURE REFERENCE. PAGE 30 IS PROVIDED FOR INSTALLATION NOTES.
| e110 & e112 Page 26 RECOMMENDED SETUP PROCEDURES (continued) Subwoofer System Setup: Once you have set the controls on your home theater receiver or preamp/ processor and on your E-Sub (s) to the settings recommended on pages 24 and 25, you are ready to begin setting up your E-Sub for optimum ...
Page 27 - FREQUENTLY ASKED QUESTIONS; Can I place objects on my subwoofer?; When in “Auto” mode, the; Is it safe to use my E-Sub outdoors, in a sauna or on a pool deck?
Page 27 | e110 & e112 FREQUENTLY ASKED QUESTIONS Can I place objects on my subwoofer? We do not recommend placing any items on the subwoofer cabinet as they may vibrate, causing undesirable noise and possible damage to the finish. Under no circumstances should any object containing liquid be pla...
Page 29 - TROUBLESHOOTING
Page 29 | e110 & e112 TROUBLESHOOTING No sound from subwoofer. 1. Verify that E-Sub is plugged in, turned “ON” & that the top-panel LED is green. If the E-Sub will not power up, check the circuit breaker that feeds its outlet, or the AC power cord. 2. Verify that your receiver’s subwoofer se...
Page 30 - INSTALLATION NOTES
Page 31 - LIMITED WARRANTY / SERVICE INFORMATION; covered under warranty.; If you need service on your JL AUDIO product:; JL Audio customer service:; International Warranties:; country’s distributor and not by JL Audio, Inc.
Page 31 | e110 & e112 LIMITED WARRANTY / SERVICE INFORMATION JL AUDIO warrants this product to be free of defects in materials and workmanship for a period of three (3) years from the original date of purchase. Damage caused by the following is not covered under warranty: accident, misuse, abuse...
Page 32 - FEATURES; Variable from full mute to +15dB over
| e110 & e112 Page 32 CH. 2 (R) Grounded Isolated CH. 1 (L) HIGH LEVEL INPUTS SERIAL NUMBER: Warranty void if serial number is removed, altered or defaced. LINE OUTPUTS L L R R LINE INPUTS Built in USA with domestic and imported components Specifications E110 E-Sub powered subwoofer E112 E-Sub p...
