JL Audio 93330 - User Manual
JL Audio 93330 Subwoofer – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – JL AUDIO
- Page 3 – Connection
- Page 4 – CONTROL PANEL SETTINGS; Switch; Variable; STATUS LED / PROTECTION CIRCUITRY
- Page 5 – or; Doing so will void the warranty and may cause severe damage/injury.
- Page 6 – APPENDIX A
- Page 8 – and you may also have other rights, which vary from state to state.; If you need service on your JL AUDIO product:; Audio. Freight damage on returns is not covered under warranty.; International Warranties:; by that country’s distributor and not by JL Audio, Inc.
Thank you for purchasing a JL Audio amplified subwoofer system for
your automotive sound system.
Your subwoofer system has been designed and manufactured to exacting
standards to provide high-quality sub-bass performance and years of
musical enjoyment in your vehicle. For maximum performance, we
highly recommend that you have your new subwoofer system installed
by an authorized JL Audio retailer. Your authorized retailer has the
necessary training, expertise and installation equipment to ensure
optimum performance from this product. Should you decide to install
your subwoofer system yourself, please take the time to read this manual
thoroughly so as to familiarize yourself with it installation requirements
and setup procedures.
If you have any questions regarding the instructions in this
manual or any aspect of your subwoofer system’s operation, please contact
your authorized JL Audio retailer for assistance. If you need further
assistance, please call the JL Audio Technical Support Department at
(954) 443-1100 during business hours.
OWNER’S MANUAL
MicroSub+ / PowerWedge+
Amplified Subwoofer Systems with DCD™ Amplifier Technology
50
80
125
100
200
Low-Pass
Filter Freq. (Hz)
Turn-On
Mode
Remote
Level
Control
Low-Level Inputs
High-Level
Inputs
FUSE
(30A)
(L)
(R)
Input
Sensitivity
Min.
Max.
Signal | DC | Rem
0 | 180 deg.
+12 VDC
GND
Remote
Output
Polarity
Power Connections
Power
(green)
Protect
(red)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 JL AUDIO ® INSTALLATION APPLICATIONS The built-in amplifier used in this subwoofer system is designed for operation in vehicles with 12V, negative-ground electrical systems. Using this product in systems with positive ground and/or voltages other than 12V may result in damage to the product and wi...
MicroSub+ / PowerWedge+ with DCD™ Amplifier Technology 3 POWER CONNECTIONS PLUG To connect the power wires and remote turn-on wire to the amplifier, unplug the “Power Connections” plug from the amplifier panel (pull back firmly) and back out the set screws on the connector plug using a Phillips head...
4 JL AUDIO ® CONTROL PANEL SETTINGS AND ADJUSTMENTS Use the amplifier’s panel mounted settings and controls to integrate and adjust the performance of your subwoofer system to your vehicle and listening preference. 50 80 125 100 200 Low-Pass Filter Freq. (Hz) Turn-On Mode Remote Level Control Low-Le...
