Jet JSG-96 - Manual
Jet JSG-96 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – WARNING
- Page 4 – SAND with the grain of the wood.
- Page 5 – Grounding Instructions
- Page 7 – Read and understand the entire contents of; Unpacking
- Page 8 – Assembly; CAUTION; Machine is heavy! Use care when lifting out; Mov e the sander to a workbench or one of
- Page 9 – Sanding Belt Table Adjustment; Always disconnect the sander from the; Place a square on the sanding belt table
- Page 11 – Belt Tracking Adjustment; Secure the tracking lock by pushing the; Disc Table Adjustment
- Page 12 – If the miter slot is not parallel loosen the two; Sanding Disc Replacement; wheel. Make sure the disc plate is clean.; Center Point
- Page 14 – Sander will not start
- Page 15 – Disc Sander Assembly Breakdown
- Page 16 – Index Part
- Page 18 – Belt Sander Assembly Breakdown
- Page 19 – Belt Sander Assembly
- Page 21 – Open Stand Breakdown
- Page 22 – JSG-96 Open Stand Assembly
- Page 23 – Closed Stand Breakdown
- Page 24 – Closed Stand Assembly
Operating Instructions and Parts Manual
Benchtop Disc/Belt Sander
Model JSG-96
(shown with optional closed stand 708597)
WMH TOOL GROUP
2420 Vantage Driv e
Elgin, Illinois 60123
Part No. M-708595
Ph.: 800-274-6848
Rev ision G 10/04
www.wmhtoolgroup.com
Copyright © W MH Tool Group
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 WARNING Wear eye protection. Always keep guards in place and in proper operating condition. Do not operate the machine without the guards for any reason. This disc/belt sander is intended to be used with wood and wood products only. Use of this disc/belt sander and a dust collector with metal prod...
4 • ALWAYS DISCONNECT THE MACHINE FROM THE POWER SOURCE BEFORE SERVICING. • REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure the switch is in the off position before plugging in. • USE RECOMMENDED ACCESSORIES. The use of accessories and attachments not recommended by JET may cause hazards or ris...
5 Grounding Instructions Caution: This tool must be grounded while in use to protect the operator from electric shock. In the ev ent of a malfunction or breakdown, grounding prov ides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an ...
