Jet DC-1200C - Manual
Jet DC-1200C – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – WARNING; SAVE THESE INSTRUCTIONS
- Page 5 – Read and understand the entire contents of; Unpacking
- Page 6 – Assembly; Thread the caster shaft into; Press the inlet port onto the inlet
- Page 8 – Mount the handle onto the canister filter with
- Page 10 – Parts Breakdown for DC-1200C Dust Collector w/Canister Filter
- Page 11 – Parts List for the DC-1200C Dust Collector w/Canister Filter; Index
- Page 12 – Wiring Diagram For Single Phase 230V Only Dust Collector
OWNER'S MANUAL
DC-1200C Dust Collector
JET EQUIPMENT & TOOLS, INC.
P.O. BOX 1349
Phone:253-351-6000
A W MH Company
Auburn, W A 98071-1349
Fax: 1-800-274-6840
www.jettools.com
e-mail [email protected]
M-708634C 1/02
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 WARNING 1. Read and understand the entire contents of this manual before attempting assembly oroperation. Do not use this machine until proper training and knowledge has been obtained. 2. Do not leav e Dust Collector when plugged in. Unplug from outlet when not in use and beforeserv icing. 3. Do n...
5 WARNING Read and understand the entire contents of this manual before attempting assembly or operation of the dust collector! Failure to comply may cause serious injury! Unpacking 1. Remov e all contents from the shippingcarton. 2. Report any damage to your distributor. 3. Do not discard any shipp...
6 Assembly 1. Install four casters to the under side of thebase as pictured in Fig. 1. Thread the hexnut (B, Fig. 1) onto the caster shaft. Thenslide the lock washer (A, Fig. 1) ov er thecaster shaft. Thread the caster shaft into the threaded hole on the underside of thebase, turn until snug. Tighte...
