Jet 550604 - User Manual
Jet 550604 Air Hammer – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety warnings; General air tool warnings
- Page 3 – Specific warnings for Sand Rammers
- Page 4 – About this manual
- Page 5 – Tool specifications
- Page 9 – Lubrication
- Page 10 – Troubleshooting JCT-1600 series Sand Rammers
- Page 11 – Replacement parts
- Page 18 – Warranty and Service
Pneumatic Sand Rammer
#550600, JCT-1600
#550601, JCT-1601
#550602, JCT-1602
#550603, JCT-1603
#550604, JCT-1604
#550605, JCT-1605
Operation & Parts Manual
M-550600
Edition 2
05/2017
JET
427 New Sanford Road
LaVergne, TN 37086
Ph.: 800-274-6848
www.jettools.com
Copyright © 2017 JET
JCT-1600
JCT-1605
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 JCT-1600 series Sand Rammers Safety warnings General air tool warnings 1. Read and understand this entire manual before attempting assembly or operation. 2. Read and understand all warnings posted on the tool and in this manual. Failure to comply with all of these warnings may cause serious injury...
JET 3 20. Do not use power tools in damp or wet location, or expose them to rain. Keep work area well lighted. 21. Do not leave a connected tool unattended. When not in use, disconnect tool from air source. 22. Shut off air supply and discharge any residual pressure from tool before removing hose, m...
4 JCT-1600 series Sand Rammers 42. If sand rammer begins vibrating more than usual, stop immediately and investigate the cause. If repairs or maintenance are needed, do not operate the tool until these have been completed. Familiarize yourself with the following safety notices used in this manual: T...
