Jet 22-44 Pro-3 - Manual
Jet 22-44 Pro-3 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – technology discussed in detail later in this; Precision Drum
- Page 3 – that makes operating the take-up; Table and Feed; technology
- Page 4 – Table Height; Digital Read Out
JET 22-44 Pro-3 Drum Sander
Our JET 22-44 Pro-3 Drum Sander quickly became a
favorite of wood workers because of its durability, huge
capacity, ease of use and exceptional surface smoothing
capabilities. In addition to the wide range of sanding grits,
our variable feed rate and exclusive SandSmart™
technology provide unrivaled control over the sanding
process.
The JET 22-44 Pro-3 Drum Sander has the capacity to
handle surprisingly large jobs despite its 52”-tall by 41”-
long dimensions. The JET 22-44 Pro-3 Drum Sander can
sand material up to 4”-thick and 44”-wide (2 passes). The
design of the drum and conveyor also mean that it can handle material as short as 2 ¼”-
long and down to 1/32”-thick! And, we are so sure of the heavy-duty construction and
design that we cover the JET 22-44 Pro-3 Drum Sander with our
5-year warranty!
The JET 22-44 Pro-3 Drum Sander
has the power and versatility to make
your shop more efficient.
Tough Structure
The JET 22-44 Pro-3 Drum Sander is built around a rigid
backbone. Massive 3”-diameter, thick walled steel posts provide
the main vertical support for this 385 lb. machine. A specially
engineered cast iron arm supports the drum assembly, insuring
accurate, repeatable sanding. The table and motor are also rigidly
supported on heavy gauge steel brackets.
The wide stance cast aluminum legs keep the JET 22-44 Pro-3
Drum Sander exceptionally stable during use. The high quality
casters at the end of each leg feature
smooth rolling, non-marring
polyurethane tires. Each full swivel
caster has a foot operated lever that locks the swivel and wheel.
Built around massive steel
columns, the JET 22-44
Pro-3 is as tough as it is
accurate.
Even the high end, full swivel
locking casters with their
polyurethane tires are standard
equipment.
A full-width hinged shroud around the drum improves safety
while enhancing dust collection. A 4”-diameter port on the
outfeed side of the shroud lets you connect standard dust
collector hose (no adapters needed) to keep the shop clean and
extend the life of the abrasive.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Motors and Switching The JET 22-44 Pro-3 Drum Sander uses two independent motors, one turning the sanding drum and the other the conveyor belt. The larger motor for the drum produces 3 HP on 1 phase, 230V (only) power. This TEFC (totally enclosed fan cooled) motor is rated using a continuous duty cy...
permanently lubricated ball bearings. The drum assembly is mounted in a truss-like carriage arm for superior strength and rigidity. This system also makes aligning the drum to the table surface easy. That means consistent performance with minimal adjusting by the operator. Our special Tuf Tool makes...
Table Height A large, 7 ¾”-diameter cast-iron handwheel adjusts the table height within its 4” range. Each full turn of the handwheel changes table height by 3/32" for ultra precise sanding thickness control. The handwheel operates a screw and gear drive that controls both ends of the table to k...
