JENSEN CH1002 - Manual
JENSEN CH1002 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Manual del Usuario; Introducción
- Page 3 – Transport Lock Screws; Precautions; Remove Transport Lock Screws; Tornillos de Bloqueo para Transporte; Precauciones; Ecrous de Transport de Verrouillage; Précautions
- Page 4 – Choosing a Location; WARNING! Never mount the unit near the fuel tank.; Under Passenger’s Front Seat/Behind Seat; Eligiendo la Ubicación; ¡CUIDADO! Nunca monte la unidad cerca del tanque de combustible.; Bajo el Asiento Delantero o Trasero del Pasajero; Choisir une Location; Voitures avec Hayons, Wagons et Camionnettes
- Page 5 – Horizontal Installation; Position “0”; Instalación; Installation; Installation Horizontale
- Page 6 – Carpet
- Page 7 – Vertical Installation; Instalación Vertical; Installation Verticale
- Page 9 – 5° Angle Installation; Instalación en un Ángulo de 45°; Installation à 45 Degrés
- Page 11 – Suspended Installation; Machine Screws; Instalación en Suspensión; Installation Suspendue
- Page 12 – CDC Ready Radio; RESET
- Page 14 – Normal Release; Manual Magazine Release; Cargando el Cambiador de CD (Continuación); Liberación Normal; Relâche Normal
- Page 15 – Troubleshooting; Using the Reset Button; Specifications; 2-Month Limited Warranty
- Page 16 – Resolución de Fallas; Utilizando el Botón de Reinicio; Especificaciones; Garantia Limitade de 12 Meses
- Page 17 – Utilisation du Bouton de Réglage; Caractéristiques
OPEN
COMPATIBLE
DIGITAL AUDIO
COMPACT DISC CHANGER
CH1002
Introduction
Description
Congratulations on your purchase of the Jensen CH1002 remote control 10-Disc CD Changer.
This system allows you to easily upgrade your vehicle's existing Jensen CDC ready audio
system to include a quality CD entertainment function.
Features
•
Remote mount changer holds up to 10 compact discs.
•
Advanced technology includes 8x oversampling digital filter and twin 1-bit digital/analog
converters.
•
The special design allows horizontal, vertical or 45-degree mounting.
Preparation
Getting Started
It’s a good idea to read all of the instructions before beginning the installation. We recommend
having your Jensen 10-Disc CD changer installed by a reputable installation shop.
Tools and Supplies
The following tools and supplies are needed to install the CD changer.
•
Torx type, flat-head and Phillips screwdrivers
•
Cordless drill / drill bit set
•
Wire cutters and strippers
•
Electrical tape
•
Crimping tool
•
Crimp connections
•
Double-sided tape (or wire ties)
•
Isopropyl (rubbing) alcohol
•
Paper towels
•
RTV silicone sealer
Disconnect Battery
Before you begin, disconnect the battery negative terminal.
CH1002
Owner’s Manual
Thank You!
Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s
manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to
use all the features of your new Jensen 10-Disc CD Changer for maximum enjoyment.
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Loading the CD Changer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Audiovox Electronics Corporation
150 Marcus Boulevard
Hauppauge, NY 11788
1-800-323-4815
www.jensen.com
© 2004 Audiovox
v.052404
NOTE: The products pictured in this manual are for illustrative purposes only, intended to
help install and/or operate the product. The actual product you have may be slightly
different from the one illustrated herein.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
CH1002 2 ¡Gracias! Gracias por elegir los productos Jensen. Esperamos que encuentre en este manual instrucciones claras y fáciles de seguir. Si se toma unos pocos minutos para leerlo, aprenderá cómo utilizar todas las funciones de su nuevo Cambiador de CD de 10 Discos Jensen para su máximo entreteni...
CH1002 3 Preparation (continued) Transport Lock Screws The mechanism in the CD changer is "locked" into place during shipment by transport screws. Be sure to remove the screws prior to installation. Retain these screws for future use when transporting the unit for service/maintenance. After ...
CH1002 4 7. Be careful not to snag any wires when tightening screws. 8. This unit cannot be installed on its side, end, or upside down. Installation in such positions will cause malfunctioning of the mechanism. Choosing a Location Select a location for the CD changer that: • Provides sufficient vent...
