JBL SB-2 - Manual
JBL SB-2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Table of Contents; SIX SUB-SAT SYSTEMS AT A GLANCE
- Page 4 – SUB-SAT SYSTEMS AT A GLANCE
- Page 5 – Important Satellite Connection Information; CORRECT; WRONG
- Page 6 – Sub-Sat System Design; General Objectives; Sensitivity Balance; a) Sensitivity Balance; Subwoofer Model Selection
- Page 7 – Sub-Sat Design Considerations; Sound Level Capability; Actual Max SPL; Subwoofer Location’s Affect on Sensitivity; Ohm / 8 Ohm Setting; Operation from a 70V/100V Distributed; Speaker Type for 70V/100V Systems; DO NOT use T-version satellite speakers for any
- Page 8 – Subwoofer Distance Consideration; Affect of Room Size on Sound Level; Figure 2
- Page 9 – Do NOT use a different quantity or model of satellite; pcs Control 23 with Control SB-2; Application; Connection
- Page 10 – Mono Operation; Connection Diagrams; System #2 in Mono
- Page 11 – System #2 in Stereo; System #2 on 70V/100V Distributed Line
- Page 12 – System #3 in Mono
- Page 13 – System #3 in Stereo; System #3 on 70V/100V Distributed Line
- Page 14 – System #4 in Mono
- Page 15 – System #4 in Stereo
- Page 16 – System #5 in Mono
- Page 17 – System #5 on 70V/100V Distributed Line; System #5 in Stereo
- Page 18 – System #6 in Mono; Systems with
- Page 19 – System #6 in Stereo
Satellite
Outputs
Left
Right
System #5 in Stereo
SPL
(at 20 Feet):
94 dB Continuous (peaks of 104 dB)
From
Power
Amp
Left
Right
MODULE SETTINGS:
Stereo / Mono Selector: Stereo
4-Ohm / 8-Ohm Selector: 4-Ohms
Input
Terminals
Control SB-210 with
MTC-210-SAT
Crossover Input Module
Control 25AV
(8 ohm setting)
Control 25AV
(8 ohm setting)
Control 25AV
(8 ohm setting)
Control 25AV
(8 ohm setting)
Using subwoofers and satellite loudspeakers with a pre-engineered passive crossover built into the
subwoofer can be a very effective way of achieving high-fidelity sound economically for applications
requiring greater bandwidth than is typically possible from full-range speakers alone.
When applied properly, small subwoofer-satellite systems – often referred to as
“sub-sat”
systems –
can provide high fidelity sound for a wide variety of applications, such as restaurants, retail stores,
hotels, music cafes, leisure venues, sports bars & lounges, fitness centers, themed applications, and
many more.
This guide provides recommended subwoofer-satellite configurations that work well together. In
addition, the
Connection Information
and
System Design
sections provide important information
for applying these subwoofer-satellite systems properly.
APPLICATION GUIDE
Subwoofer-Satellite Systems
Using Control SB-210 & SB-2 Subwoofers
System #5 in Stereo Mode Shown
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Table of Contents SIX SUB-SAT SYSTEMS AT A GLANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORTANT SATELLITE CONNECTION INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . 3 SYSTEM CONSIDERATIONS General Objectives . . . . . . . . . . . ...
SUB-SAT SYSTEMS AT A GLANCE Detailed Information About Each System and Application Guidelines are on the Following Pages. System Number Products Applications SPL (Max Cont. @ 20 ft) Modes Ω Per Amp Channel Surface-Mount (On-Wall) Satellite Speakers System 1 (CCS6000) 4 x Control 23 1 x SB-2 Light vo...
Important Satellite Connection Information For Mono (& 70V Mono) Systems For Mono systems, always connect half the satellite speakers to one of the satellite speaker output terminals and the other half to the other satellite speaker output terminals. Do NOT connect to only one of the sets of sat...
