Jasco 51209 - Manual
Jasco 51209 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Motion Sensing Alarm; Low Battery Indicator; The Motion Sensing Alarm has a low; Wall
- Page 4 – INSTALLING BATTERIES; The battery compartment is located on
- Page 5 – CREATING YOUR PERSONAL ALARM CODE; The -digit keypad allows you to set a; INSTALLATION; The alarm is designed to be wall mounted
- Page 7 – OPERATING IN THE ALARM MODE
- Page 8 – Slide switch to ALARM mode.; Arming the Alarm
- Page 9 – Disarming the Alarm; The unit will beep once if motion is sensed.
- Page 11 – To clean the unit housing, use a soft cloth
- Page 12 – WARNING; Limitations of Alarm Products
Do not use in wet locations
Personal Security
Motion Sensor
with Keypad
User Manual
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Motion Sensing Alarm With Remote Control Low Battery Indicator The Motion Sensing Alarm has a low battery indicator light. When the batteries need to be replaced, the indicator will flash slowly. Average battery life for typical usage is up to one year. Wall Mount Alarm/Chime Switch Motion Sensing A...
INSTALLING BATTERIES The battery compartment is located on the back of the unit. Remove the battery compartment screw and slide off cover in the direction of the open arrow.Insert (3) AA batteries (not included) . Take care to note the polarity diagram inside the battery compartment . Replace the co...
CREATING YOUR PERSONAL ALARM CODE The -digit keypad allows you to set a personal code for arming and disarming the alarm. Remove the battery compartment screw and slide off cover in the direction of the open arrow. Press the LEARN button once; the red indicator light on the front of the alarm will b...
