Jabra C220- User Manual

Back Components Ref Component Description n Speaker Sends out music, sounds and voice. Right-Side Components 2

Ref Component Description n SD/MMC Slot Accepts an SD (Secure Digital) or MMC (MultiMedia Card) card for accessing data such as map data. o Headphone Connector Connects to stereo headphones. Top Components Ref Component Description n External Antenna Connector This connector (under rubber dust cover...

1.2 Performing the Initial Start Up 1. Make sure that power is supplied to your device. (See the next section.) 2. For the initial start up, press the power button for 10 seconds to turn on your device. NOTE: For normal operation, briefly press the power button to turn on and off your device. 3. The...

1.3 Using Your Device in a Vehicle Using the Device Holder CAUTION: z Select an appropriate location for the device holder. Never place the holder where the driver’s field of vision is blocked. z If the car’s windshield is tinted with a reflective coating, an external antenna (optional) may be neede...

z Do not charge the battery where the temperature is high (e.g. in direct sunlight). z There is no need to fully discharge the battery before charging. You can charge the battery before it is discharged. z If you will not use the product for a long period of time, be sure to fully charge the battery...

z Tap Touch the screen once with your fingertip to open items or select onscreen buttons or options. z Drag Hold your fingertip on the screen and drag up/down/left/right or across the screen. z Tap and hold Tap and hold your fingertip until an action is complete, or a result or menu is shown. Home S...

1.5 Inserting a SD/MMC Card Your device has a SD/MMC slot where you can insert an optional Secure Digital or MultiMediaCard storage card. To use a SD/MMC card, insert it into the slot, with the connector pointing to the slot and its label facing the front of the device. To remove a card, first make ...

2 Settings 2.1 Starting and Exiting Settings You can customize the system settings such as backlight brightness, volume, anlanguage. Once you change the settings, the new settings will remain until you change them again. d Settings Tap the button on the Home screen. The Settings menu appears as show...

2.2 Backlight 1. Tap the Settings button on the Home screen. 2. Tap the Backlight button. 3. Move the knob along the track bar to adjust the brightness of the backlight. To darken the backlight, move the knob to the left. To lighten the backlight, move the knob to the right. 4. Tap to save the chang...

2.3 Volume 1. Tap the Settings button on the Home screen. 2. Tap the Volume button. 3. Move the knob along the track bar to adjust the volume. To decrease the volume, move the knob to the left. To increase the volume, move the knob to the right. 4. Tap save the changes. 13

2.4 Screen You can calibrate the touch screen if it is not responding accurately to your taps. 1. Tap the Settings button on the Home screen. 2. Tap the Screen button. 3. Tap to start the calibration. 4. Tap and hold the centre of the target. 14

5. When the target moves to another position, tap and hold the centre of the new target. Repeat each time to complete the calibration process. 6. When completed, tap . 2.5 Power To check the remaining power level of your battery and/or set up the power saving feature: 1. Tap the Settings button on t...

4. To change the date, tap the down arrow in the “Date” item. A calendar pops up. Tap the left arrow on the calendar to go to the earlier month and year or the right arrow to the later month and year. Alternatively, you can tap the month or year on top of the calendar to directly change the month or...

3 Troubleshooting and Maintenance nding; or appears to be “frozen” or “locked up.” he “Power Off Selection” screen appears a Troubleshooting and Maintenance 3.1 Restart and Shut Down Occasionally, you may need to reset your device. For example, you should reset your system when it stops respo Restar...

3.2 Troubleshooting er a problem you cannot solve, contact an authorized service center for NOTE: If you encount assistance. Power Problems Power does not turn on z The remaining batte when using battery power ry power may be too low to run your device. Charge the slowly z e is not running out of ba...

z Make sure that thcomputer and on e cable is securely plugged into the USB port on your the device. Connect the USB cable directly to your nnect your GPS z W en ble, consider the following: z Make sure that the GPS antenna has a clear view of the sky. : Bad weather in the car risk of dam z z z n to...

4 Regulatory Information NOTE: Marking labels located on the exterior of your device indicate the regulations that your model complies with. Please check the marking labels on your device and refer to the corresponding statements in this chapter. Some notices apply to specific models only. 4.1 Regul...

z Increase the separation between the equipment and receiver. z Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. z Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the ma...

EN6100-3-2: Limits for harmonic current emissions EN6100-3-3: Limitation of voltage fluctuation and flicker in low-voltage supply system EN60950 / IEC 60950: Product Safety The manufacturer cannot be held responsible for modifications made by the User and the consequences thereof, which may alter th...

About the Battery z Use a specified charger approved by the manufacturer. CAUTION: This unit contains a non-replaceable internal Lithium Ion battery. The battery can burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush, puncture, or dispose ...