Jabra 100-91430000-02- User Manual
Jabra 100-91430000-02– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – BASIC OPERATIONS; Turn headset on/off –
- Page 3 – TWO; STATUS INDICATORS; To answer and end calls with only the headset:; Number of Blinks
- Page 4 – If you hear an echo of your voice –; To prolong battery life:; To “pair” the headset with the multi-adapter:
JABRA FreeSpeak
TM
QUICK START GUIDE
For Nextel Phones
Model #:100-91030000-02
Model #:100-91130000-02
Model #:100-91430000-02
BEFORE USING YOUR HEADSET
Charge FreeSpeak –
FreeSpeak is rechargeable and must be charged before use.
1. Insert the headset fully into its multi-adapter.
2. Plug one end of the AC power adapter into the multi-adapter and the other end into an
electrical wall outlet.
3. Charge your headset for approximately 2 hours or until both blue indicator lights go out.
Important:
Blue indicator lights on the headset and multi-adapter will both be on while
charging and will turn off when charging is complete.
Connect multi-adapter to phone
• For phones with standard 2.5mm headset jacks:
Plug the multi-adapter’s connector into the
2.5mm headset jack on your phone.
•
For
i
2000
plus
,
i
2000,
i
1000
plus
,
i
1000,
r
750
plus
,
i
700
plus
,
i
550
plus, i
500
plus
and
i
500
phones:
Plug the audio adapter (sold separately) into your phone. Then plug the multi-
adapter’s connector into the audio adapter.
I M P O R T A N T
R E A D THIS FIRST
Location of phone’s headset
jack may vary.
Headset Indicator Light
(Blue LED)
Multi-Function Button
Volume Control Button
MiniGel
™
NON-BT
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Jabra 100-91430000-02
Summary
BASIC OPERATIONS Turn headset on/off – Press the multi-function button for 3 to 5 seconds until you see a burst of flashes on the blue indicator light, then release. The indicator lights on the headset andmulti-adapter will flash every 3 seconds while the power is on and in “ Standby ” mode. If you ...
What you see What you hear Status Flashes every second Flashes every 3seconds When Active Modestarts: quick seriesof TWO tones – low to high pitch When StandbyMode starts: quickseries of TWO tones – high to lowpitch Active Mode • Call in progress• Up to 4 hours of talk time Standby Mode • Waiting fo...
If you hear an echo of your voice – You may need to adjust microphone levels. To reduce the echo: Flashes or Beeps Microphone Level 1 2 3 High (default) Medium Low 1. Lower the volume of your phone and headset. 2. If echo persists, put FreeSpeak in Active mode. 3. Use the stylus to press down on the...
