Jabra 6317-208-102- Manuals

1 What’s in the box A. Jabra JX 10 headset 1. Light indicator (LED) 2. Volume controls 3. Charging socket 4. Answer/End button (also On/Off ) 5. Pairing button 6. Microphone 7. Speaker 8. Earhook B. Jabra Bluetooth Hub 9. Dial Tone Switch10. Light indicator (LED) 11. Pairing button 12. Microphone vol...

Specifications • Up to 6 hours talk time, up to 200 hours standby time • Rechargeable battery with charging option from desk stand charger, AC power supply. The headset can also be charged via a USB/PC cable (not included) or car charger (not included). • Headset Less than 10 grams • Operating range...

Action Touch Answer/End for… Audible indications Tap press briefly 1 beep Press approximately 1 second 2 beeps Press and hold approximately 5 seconds 2 beeps + a series of fading beeps Double tap press briefly and repeat 1 beep + 2 fast beeps 3 Headset setup, charging and use IMPORTANT: Before you b...

Charging your headset Make sure that your Jabra JX10 Headset is fully charged before you start using it. The first full charge takes approximately 2 hours. You have two options for charging the headset from a mains power supply. Charging from your desk stand (Fig. 3) Fig. 3 • Connect your AC power a...

If your headset is turned off when you charge it, it will remain off while charging and when disconnected from the charger. Turning your headset on and off • Press the headset Answer/End button  to turn your headset on. The LED  will emit 3 fast blue flashes. If you are wearing the headset, you wi...

In the unlikely event that the Bluetooth Hub is not OK, its LED  will flash red. • First, try disconnecting and reconnecting the Bluetooth Hub from the power source. • If the LED is still flashing red, you must reset your Bluetooth Hub. o Press and hold the Bluetooth Hub reset button  . o The rese...

Adjusting settings with a test call from your desk phone • Place the headset on your ear and tap the headset Answer/End button. • Lift your desk phone handset and listen for a dial tone in your headset. • If dial tone is missing or unclear, slowly slide the Dial Tone Switch  from A through G until ...

Switching from handset to headset You can switch from your desk phone handset to your headset during an active call. You might want to do this if, for example, the call was answered on the desk phone handset and you would prefer to use your headset. • Keep the desk phone handset off the hook. • Tap ...

Switching from headset to handset You can switch from your headset to your desk phone handset during an active call. You might want to do this if, for example, your headset battery is running low. • Pick up the desk phone handset. • If necessary, press the appropriate button on your desk phone (see ...

4c For use with desk phone with GN 1000 (remote handset lifter) The GN 1000 lifts or lowers your handset automatically, allowing you to answer and end calls when you’re away from your desk. Jabra Bluetooth Hub setup Connecting your Jabra Bluetooth Hub with desk phone and power supply • Disconnect th...

Staying within range The sound in your headset will deteriorate if you move beyond range* on the Bluetooth Hub. Move back into range to restore sound quality. If you move too far from the Bluetooth Hub, the call will be routed to your desk phone handset. Return into range within 60 seconds and the c...

Remember ! In general, you will get better performance when there are no obstructions between your headset and your Bluetooth Hub. 5 For use with mobile phone Setup Pairing your headset with your mobile phone NOTE: Before use, please charge your headset (see p. 8). Before you use your Jabra JX10 wit...

Use Making and ending a mobile phone call • When you make a call from your mobile phone, the call will transfer to your headset automatically (this is subject to phone settings, see you mobile phone User Manual to find out how to activate this feature). If your phone does not allow this feature, see...

Making a call with Voice Dial* • Press the headset Answer/End button to enter Voice Dial mode. (Consult your mobile phone User Manual for more information about how to use this feature.) For best results, record the voice dialing tag through your headset. Redialing the last number* • Double tap the ...

For example:You have two phones (A and B) connected to the headset. You dial the number 1111 1111 on phone A. You then receive and complete a call on phone B using the headset. You then use the Last Number Redial and dial 1111 1111 on phone A. NOTE: When multiple Bluetooth-enabled devices are paired...

• Is your headset disconnected from its charger (desk stand or charger )? • Has the Dial Tone Switch  been adjusted correctly? • Has the microphone volume  been adjusted correctly? • Is the headset within range of the Bluetooth Hub/mobile phone? • Can your headset and Bluetooth Hub ‘see’ each othe...

8 Maintenance, safety and disposal Taking care of your headset • Always store the Jabra JX10 with the power off and safely protected. • Avoid storage at extreme temperatures (above 113°F/ 45°C – including direct sunlight – or below 14°F/-10°C). This can shorten battery life and may affect operation....

Bluetooth® profiles are the different ways that Bluetooth® devices communicate with other devices. Bluetooth® phones support either the headset profile, the hands-free profile or both. In order to support a certain profile, a phone manufacturer must implement certain mandatory features within the ph...