Intellinet Network Solutions 529930 - Manual

4 1. Connecting the Ethernet cable. Connect a network cable to the Internet Sharing Station’s RJ-45 or BNC port. This unit supports two types of Ethernet cables: Thin Ethernet (10BASE2, BNC connector) and Twisted Pair Ethernet (10BASE-T, RJ-45 connector). During power up, the unit automatically dete...

5 To configure a Windows 95/98 system 1. Right-click Network Neighborhood. 2. Click Properties on the pop-up menu. 3. Click the Configuration tab and select the TCP/IP networking component and click Properties. 4. Make sure “Obtain an IP Address Automatically” is selected. 5. Select the DNS Configur...

6 IP Address: IP address for the Internet Sharing Station. Use the default value (192.168.0.254) unless the address is already in use. Network Mask: The default value 255.255.255.0 is OK for small networks. DHCP Server: Select “Enable” to enable the function of DHCP service for local LAN. Select “Di...

8 Modem AT Command Settings Model: If your model is listed, simply select it , then the modem initial string will be configured automatically. If your model is not listed, try “ Standard” or “Standard 56K” modem If it still not work, select “Other”. You will have to enter the modem initial strings, ...

9 Email Sharing Configuration The usage of Email sharing allows one Email account shared with multiple users. The [Mail Server Account] specifies the shared Email account, and the [Local User Account] specify the sharing users. The detail configurations to some popular Email clients such as “Outlook...

11 Firmware Upgrade Procedure You may follow the procedure specified in this page to update your firmware. Reset to Factory Default This feature let all configurations return to the initial factory value. System Restart If complete all configurations, the new values may effect after you restart the ...

12 Note: 1 Once the Internet Sharing Station has been configured, all of the PCs should be restarted to get the new TCP/IP settings from the Internet Sharing Station. 2 After restarting your computer, please make sure your computer has obtained an IP address, DNS and Gateway IP address(192.168.0.254...

13 Renew. On Windows NT: Type ipconfig from the command prompt. The PC should have an IP address of 192.168.0.n, where n is from 1 to 252. The Gateway IP address of the PC must be 192.168.0.254. If the IP address is not in the range, type the following commands: ipconfig / release ipconfig / renew 2...

15 Specifications Standards and Protocols IEEE 802.3 10BASE-T and 10BASE2 TCP/IP, PPP, CHAP/PAP/MS-CHAP, DHCP Operational Characteristics LAN port: 10BASE2/10BASE-T auto sensing WAN speed: 230.4Kbps max. DTE speed Power Characteristics External Power Adapter: Input Voltage: 100VAC, 60Hz / 120VAC, 60...

16 CE Mark Declaration of Conformity for EMC and Safety(EEC) EMC: EN55022 (1994)/CISPR 22 (1993) class B IEC 1000-4-2 (1995) 4kV CD, 8kV AD IEC 1000-4-3 (1995) 3V V/m IEC 1000-4-4 (1995) 1kV - (power line) , 0.5kV - (signal line) This product complies with the requirements of the Low Voltage Directi...

18 Appendix B: Configure Your E-mail Clients For E-mail Sharing Function „ Email Sharing Operation Model In this case, E-mail sharing function allows your ISP E-mail address called [email protected] be shared by PC1 and PC2, so that they can have their own e-mail address, mentioned as follow: ...

19 Netscape Messenger Select the user name defined in IS020 The shared E-mail account Step 2: Fill in aliases name and real email address The real mail server The IP address of Internet Sharing Station The user name defined in Internet SharingStation The password for this user on Internet SharingSta...