Page 2 - Wireless LAN, Health and Authorization for Use; FCC Radio Frequency Exposure Statement; FCC Interference Statement
REGULATORY NOTES AND STATEMENTS Wireless LAN, Health and Authorization for Use Radio frequency electromagnetic energy is emitted from wireless LAN devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices like mobile pho...
Page 4 - CONTENTS; Unpacking and Setup; section
CONTENTS 1. Introduction .......................................................................6 Applications............................................................................. ...............6 Features................................................................ .........................
Page 5 - sharing, and it is easy to configure and operate.; Purpose; This manual discusses how to install the Wireless Super G Router.; Overview of This Manual; environmental) specifications of the Wireless Super G Router.
Wireless ........................................................................22 Status ............................................................................25 Routing ..........................................................................28 Access .........................................
Page 6 - APPLICATIONS; Broadband Internet access
1. INTRODUCTION With the explosive growth of the Internet, accessing information and services at any time — day or night — has become a standard requirement for most people. The era of the stand-alone PC is waning. Networking technology is moving out of the exclusive domain of corporations and into ...
Page 7 - FEATURES
FEATURES • High-speed data-transfer rate• Supports NAT for sharing one IP address with all LAN/WLAN users• Supports PPPoE and PPTP protocols for dial-up ADSL• Supports 64/128-bit WEP encryption• Supports WPA-PSK, WPA2-PSK, WPA, WPA2 security• Supports DHCP server/client• Supports UPnP (Universal Plu...
Page 8 - UNPACKING; antenna, the better the performance will be. The antenna’s position
2. UNPACKING AND SETUP This section provides unpacking and setup information for the Wireless Super G Router. UNPACKING Open the box of the Wireless Super G Router and carefully unpack it. The box should contain the following items:• One Wireless Super G Router, Model 502566• One di-pole antenna• On...
Page 9 - FRONT PANEL; Power; REAR PANEL; Antenna
3. HARDWARE INSTALLATION FRONT PANEL Power — This indicator lights green when the hub is receiving power; otherwise it is off. Status — This indicator blinks green when the router is working. If it stays on or off, the router is not working. WAN (Link/ACT) — This indicator lights green when the WAN ...
Page 10 - HARDWARE CONNECTIONS; Connecting the router; as a connection-sharing unit and as a switch.; Checking the installation
HARDWARE CONNECTIONS Connecting the router 1. Plug in one end of the network cable to the WAN port of the router.2. Plug in the other end of the network cable to the Ethernet port of the xDSL or cable modem.3. Use another network cable to connect to the Ethernet card on the computer system; the othe...
Page 12 - WINDOWS
6. Select “None” for the “Gateway” field. WINDOWS 2000/NT Double click on the “My computer” icon on the desktop. When the “My computer” window opens, open the “Control panel” and then the “Network dialup connection”applet. Double click on the “Local area network connection” icon. Select “Properties” ...
Page 13 - WINDOWS XP
13 WINDOWS XP Point the cursor and right click on the “My Network Place” icon.Select “Properties” to enter the TCP/IP setting window.1. Set “IP address” to “Obtain an IP address automatically.”2. Set “DNS” to “Obtain DNS server address address automatically.” PC NETWORK TCP/IP SETTINGS
Page 15 - SETUP WIZARD; Step 1. Set your new
SETUP WIZARD Setup Wizard is provided as the part of the Web configuration utility. You can get the wireless router configuration ready to run in six easy steps by clicking on the “Wizard” button on the function menu. The screen at the right will appear. Click “Next” to continue. Step 1. Set your new ...
Page 18 - PPTP
PPTP If connected to the Internet using a PPTP (xDSL) modem, enter your IP address, subnet mask, gateway, server IP, PPTP account and PPTP password in the appropriate fields. If your ISP has provided you with a connection ID, enter it in the “Connection ID” field; otherwise, leave it as zero. 18 CONFI...
Page 20 - ADVANCED CONFIGURATION; LAN settings; WAN
ADVANCED CONFIGURATION LAN settings This screen enables you to configure the LAN & DHCP server; set WAN parameters; create administrator and user passwords; and set the local time, time zone and dynamic DNS. LAN & DHCP server This screen allows you to set LAN and DHCP properties, such as the ...
Page 22 - Dynamic DNS; Wireless; Basic
22 Default NTP server: The Simple Network Time Protocol (SNTP) server allows the Wireless Super G Router to synchronize the system clock to the global Internet through the SNTP server. Specify the NTP domain name or IP address in the text box.Time Zone: Select the time zone from the drop-down list.D...
Page 24 - Security
24 Lifetime: Select the Lifetime of the Encryption Key (5 Minutes to 1 Day). As soon as the lifetime of the Encryption Key is over, the Encryption Key will be renewed by the RADIUS Server.Encryption Key: Select the Encryption Key Length (64 bits or 128 bits) that you would like to use.RADIUS Server:...
Page 25 - Status; Device Information
25 Advanced This screen enables the user to configure advanced wireless functions.Beacon Interval: Type the beacon interval in the text box. You can specify a value from 1 to 1000. The default beacon interval is 100.RTS Threshold: Type the RTS (Request-To-Send) threshold in the text box. This value s...
Page 26 - Log
26 address, IP address, subnet mask and DHCP server status. Click “DHCP Table” to view a list of client stations currently connected to the router LAN interface.Wireless: This section displays the wireless configuration information, including the MAC address, Connection status, ESSID, Channel and Aut...
Page 28 - Routing; Static
28 Wireless This screen enables the user to view information about wireless devices that are connected to the Wireless Super G Router. Connected Time: Displays how long the wireless device has been connected to the LAN via the router.MAC Address: Displays the device’s wireless LAN interface MAC addr...
Page 29 - Access
29 Delete: Select one of the entries in the static IP address table at the bottom of the page and click “Delete” to remove the entry.New: Click “New” to clear the text boxes and add required information to create a new entry. Dynamic This screen enables the user to set NAT parameters.NAT: Click the ...
Page 33 - Special AP
33 Enable: Click to enable or disable the virtual server.Name: Type a descriptive name for the virtual server.Protocol: Select a protocol (TCP or UDP) to use with the virtual server.Private Port: Type the port number of the computer on the LAN that is being used to act as a virtual server.Public Por...
Page 35 - Management; SNMP
35 Enable: Click to enable or disable the firewall rule profile.Name: Type a descriptive name for the firewall rule profile.Action: Select whether to allow or deny packets that conform to the rule.Source: Defines the source of the incoming packet that the rule is applied to. • Interface: Select which int...
Page 36 - Remote Management
36 Enabled/Disabled: Click to enable or disable the SNMP.System Name: A name given to the router.System Location: A description of the location of the router (normally, the DNS name).System Contact: A description of the contact information for the person responsible for the router.Community: The SNM...
Page 37 - Tools; Restart
37 playing games or using these voice applications, it is recommended that Gaming Mode be disabled.PPTP: Enables the user to set up PPTP access for remote management.IPSec: Enables the user to set up IPSec access for remote management.IDENT: The default is Stealth. This enables the user to set port ...
Page 38 - Ping Test
38 Select the file and click “Upgrade” to update the firmware to the latest release. Ping Test The ping test enables the user to determine whether an IP address or host is present on the Internet. Type the hostname or IP address in the text box and click “Ping.” CONFIGURATION
Page 39 - GENERAL
39 6. TECHNICAL SPECIFICATIONS GENERAL Standards IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.11g; IEEE 802.11b Protocol CSMA/CD Radio Technology IEEE 802.11g Orthogonal Frequency Division Modulation Data Transfer Rate 802.11b: 1, 2, 5.5, 11Mbps (auto sense) 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mb...
