Page 2 - This page intentionally left blank
Page 3 - Table of Contents; Power Consumption (Windows
Table of Contents Kontron User's Guide ETX CD iii Table of Contents 1 User Information........................................................................................................ 6 1.1 About This Document ......................................................................................
Page 6 - User Information; About This Document; Microsoft is a registered trademark of Microsoft Corp.; Standards; Kontron Embedded Modules GmbH is certified to ISO 9000 standards.; Warranty
1 User Information Kontron User's Guide ETX CD 6 1 User Information 1.1 About This Document This document provides information about products from Kontron Embedded Modules GmbH and/or its subsidiaries. No warranty of suitability, purpose, or fitness is implied. While every attempt has been made to e...
Page 7 - Technical Support
1 User Information Kontron User's Guide ETX CD 7 The warranty does not apply to defects resulting from improper or inadequate maintenance or handling by the buyer, unauthorized modification or misuse, operation outside of the product’s environmental specifications or improper installation or mainten...
Page 8 - Introduction
2 Introduction Kontron User's Guide ETX CD 8 2 Introduction 2.1 ETX®-CD Based on the ETX® standard, Kontron’s ETX®-CD, powered by a variety of Intel Pentium core duo processors, is a next-generation embedded module that brings advanced technology to tomorrow’s applications, as well as continuing tod...
Page 9 - ETX® Documentation; Graphics
2 Introduction Kontron User's Guide ETX CD 9 2.2 ETX® Documentation This product manual serves as one of three principal references for an ETX® design. It documents the specifications and features of ETX®-CD. The other two references, which are available from the Kontron Embedded Modules Web site, i...
Page 10 - Specifications; Functional Specifications
3 Specifications Kontron User's Guide ETX CD 10 3 Specifications 3.1 Functional Specifications Processor The central processing unit (CPU) consists of: Mobile Intel ® Celeron ® M, Intel ® Core Solo ® , Intel ® Core Duo ® or Intel ® Core2Duo ® processor (Codename Yonah/Merom) which includes such feat...
Page 13 - Block diagram
3 Specifications Kontron User's Guide ETX CD 13 Watchdog timer (WDT): Winbond Super I/O Real-time clock (requires external battery) 3.1.1 Block diagram Con nec to r X4 Con nec to r X3 Ho st Bu s Conn ector X1 Hub In ter face Fe ature Co nne ctor J11 Co nne c-tor J8 Conn ec-tor J9 Conn ector X2
Page 14 - Mechanical Specifications; Dimensions; Electrical Specifications; Supply Voltage; Modules were tested using maximum CPU frequency.; ETX®-CD Celeron M ULV 423; ETX®-CD Core 2 Duo Processor L7400; ETX®-CD Core Duo Processor L2400
3 Specifications Kontron User's Guide ETX CD 14 3.2 Mechanical Specifications 3.2.1 Dimensions ® 95.0 mm x 114.0 mm ® Height approx. 12 mm (0.4”) Note: The maximum height of electrical components on the bottom side of the module is specified with 2.0mm in the ETX@ specification. On the ETX@-CD the S...
Page 15 - ETX®-CD Core Duo Processor T2500; Power Consumption; np; CMOS Battery Power Consumption; Voltage Range
3 Specifications Kontron User's Guide ETX CD 15 ETX®-CD Core Duo Processor T2500 CPU Clock 2 x 2,0 GHz Mode Full On Power Consumption 4,82 A 3.3.5 Power Consumption (Windows ® XP SP2) Full Load Idle Idle with C1E/EIST ETX® board [A]5V [A]5VSB [W] [A]5V [A]5VSB [W] [A]5V [A]5VSB [W] T2500 6,70 tbd 34...
Page 16 - Environmental Specifications; Temperature; Ambient temperature: 0°C to 60°C; Humidity; MTBF
3 Specifications Kontron User's Guide ETX CD 16 3.4 Environmental Specifications 3.4.1 Temperature Operating: (with Kontron Embedded Modules heat-spreader plate assembly): ® Ambient temperature: 0°C to 60°C ® Maximum heatspreader-plate temperature: 0°C tp 60°C (*) Non-operating: ® -30°C to 85°C See ...
Page 18 - ETX® connectors; Connector Locations; side view; General Signal Description
4 ETX® connectors Kontron User's Guide ETX CD 18 4 ETX® connectors The pinouts for ETX® Interface Connectors X1, X2, X3, and X4 are documented for convenient reference. Please see the ETX® Specification and ETX® Design Guide for detailed, design-level information. 4.1 Connector Locations IDE Port Et...
Page 20 - Connector X1 Signal Levels; Power
4 ETX® connectors Kontron User's Guide ETX CD 20 4.3.1 Connector X1 Signal Levels Pin 1-50 [ Power | PCI | USB | AUDIO ] Pin Signal Description Type Termination Comment 1 GND Ground PWR - - 2 GND Ground PWR - - 3 PCICLK3 PCI Clock Slot 3 O-3,3 - - 4 PCICLK4 PCI Clock Slot 4 O-3,3 - - 5 GND Ground PW...
Page 22 - Connector X1 Signal Description; PCI Bus; Audio; Configuration; Serial IRQ; Configuration; V Power Supply for External Components
4 ETX® connectors Kontron User's Guide ETX CD 22 4.3.2 Connector X1 Signal Description PCI Bus The implementation of this subsystem complies with the ETX® Specification. Implementation information is provided in the ETX® Design Guide. Refer to the documentation for additional information. USB Three ...
Page 24 - Connector X2 Signal Levels
4 ETX® connectors Kontron User's Guide ETX CD 24 4.4.1 Connector X2 Signal Levels Pin 1–50: [ Power | ISA ] Pin Signal Description Type Termination Comment 1 GND Ground PWR - - 2 GND Ground PWR - - 3 SD14 ISA Data Bus IO-5 PU 8k2 5V - 4 SD15 ISA Data Bus IO-5 PU 8k2 5V - 5 SD13 ISA Data Bus IO-5 PU ...
Page 26 - Connector X2 Signal Description; ISA Bus Slot
4 ETX® connectors Kontron User's Guide ETX CD 26 4.4.2 Connector X2 Signal Description ISA Bus Slot The implementation of this subsystem complies with the ETX® Specification. Implementation information is provided in the ETX® Design Guide. Refer to the documentation for additional information. Restr...
Page 27 - Parallel Port / Floppy Interfaces
4 ETX® connectors Kontron User's Guide ETX CD 27 25 LCDDO9 26 LCDDO10 27 GND 28 GND 29 LCDDO4 30 LCDDO7 31 LCDDO5 32 LCDDO6 33 GND 34 GND 35 LCDDO1 36 LCDDO3 37 LCDDO0 38 LCDDO2 39 VCC * 40 VCC * 41 JILI_DAT 42 LTGIO0** 43 JILI_CLK 44 BLON# 45 BIASON** 46 DIGON 47 COMP** 48 Y** 49 SYNC** 50 C** Note...
Page 31 - Connector X3 Signal Description; VGA Output
4 ETX® connectors Kontron User's Guide ETX CD 31 4.5.2 Connector X3 Signal Description VGA Output LVDS Flat Panel Interface (JILI) The user interface for flat panels is the JUMPtec Intelligent LVDS Interface (JILI). The implementation of this subsystem complies with the ETX® Specification. Implement...
Page 32 - IrDA
4 ETX® connectors Kontron User's Guide ETX CD 32 IrDA The ETX®-CD is capable of IrDA SIR operation. This feature is implemented in the Winbond 83627HF. Contact Kontron Embedded Systems for help with this feature. Parallel Port The parallel-communication interface shares signals with the floppy-disk ...
Page 33 - Connector X4 Subsystems
4 ETX® connectors Kontron User's Guide ETX CD 33 4.6 Connector X4 Subsystems 4.6.1 Connector X4 (IDE 1, IDE 2, Ethernet, Miscellaneous) Pin Signal Pin Signal Pin Signal Pin Signal 1 GND 2 GND 51 SIDE_IOW#** 52 PIDE_IOR# 3 5V_SB 4 PWGIN 53 SIDE_DRQ** 54 PIDE_IOW# 5 PS_ON 6 SPEAKER 55 SIDE_D15** 56 PI...
Page 36 - Connector X4 Signal Description; IDE Ports; External SMI Interrupt
4 ETX® connectors Kontron User's Guide ETX CD 36 4.6.3 Connector X4 Signal Description IDE Ports The IDE host adapter is capable of DMA-133 operation and supports only one single IDE channel which is connected to the primary channel of the ETX® connector X4. Per default it is set to DMA-33, to achie...
Page 37 - Miscellaneous Circuits; Speaker; SDVO Output; SDVO Connector and Flat Foil Cable; Flat Foil Cable
4 ETX® connectors Kontron User's Guide ETX CD 37 Miscellaneous Circuits Speaker The implementation of the speaker output complies with the ETX® Specification. Implementation information is provided in the ETX® Design Guide. Refer to the documentation for additional information. Battery The implement...
Page 38 - BIOS Requirements; Pinout Feature Connector J11
4 ETX® connectors Kontron User's Guide ETX CD 38 ® 45pos,150 mm length, 0.5mm pitch, both ends opposite sides Connector ® Hirose - FH12-45S-0.5SH ® 0.50mm (.020") Pitch FFC/FPC Connector, Horizontal Right Angle, SMT, 45 Circuits 4.7.3 BIOS Requirements There is currently no support for this feat...
Page 40 - Special Features; Watchdog Timer; -second increments from 1 to 255 seconds
5 Special Features Kontron User's Guide ETX CD 40 5 Special Features 5.1 Watchdog Timer This feature is implemented in the Winbond 83627HF super I/O. You can configure the Watchdog Timer (WDT) in BIOS setup to start after a set amount of time after power-on boot. The WDT can also be controlled by th...
Page 41 - Design Considerations; Thermal Management; This is the backside view of the heatspreader plate.
6 Design Considerations Kontron User's Guide ETX CD 41 6 Design Considerations 6.1 Thermal Management A heat-spreader plate assembly is available from Kontron Embedded Modules GmbH for the ETX®-CD. The heat-spreader plate on top of this assembly is NOT a heat sink. It works as an ETX®-standard therm...
Page 43 - Important Technology Information; I/O APIC vs 8259 PIC Interrupt mode; Method of interrupts transmission; Thermal Monitor and Catastrophic Thermal Protection
7 Important Technology Information Kontron User's Guide ETX CD 43 7 Important Technology Information The following technological information is designed to give the reader a better understanding of some of features of the ETX®-CD. This information can be referenced when reading the System Resources ...
Page 44 - Summary; Processor Performance Control; Active Cooling
7 Important Technology Information Kontron User's Guide ETX CD 44 Automatic mode does not require any additional hardware, software drivers, or interrupt handling routines. Note: With a properly designed thermal solution, the TCC is only active for very short periods, hence processor performance imp...
Page 45 - Passive Cooling; ETX®-CD onboard Fan connector; Schematics of Fan control; Mates
7 Important Technology Information Kontron User's Guide ETX CD 45 declares the temperature threshold the OS uses to decide when to start/stop active cooling devices. See section ETX®-CD onboard Fan connectorfor more information about the ETX®-CD onboard Fan control. Passive Cooling The OS reduces th...
Page 46 - Location and Pinout of Fan connector J6; Pinout
7 Important Technology Information Kontron User's Guide ETX CD 46 7.5.2 Location and Pinout of Fan connector J6 1 2 3 Pinout
Page 47 - BIOS Settings; Electrical characteristics
7 Important Technology Information Kontron User's Guide ETX CD 47 7.5.3 BIOS Settings Feature Option Description Active Trip Point Disabled 15 C 23 C … 55 C 63 C … 119 C This value controls the temperature of the ACPI active trip point - the point in which the OS will turn on the CPU fan (connector ...
Page 48 - Processor Clock Throttling; ACPI Suspend Modes and Resume Events
7 Important Technology Information Kontron User's Guide ETX CD 48 7.5.5 Processor Clock Throttling The ACPI OS assesses the optimum CPU performance change necessary to lower the temperature using the following equation: Δ P[%] = TC1(Tn-Tn-1) + TC2(Tn-Tt) Δ P is the performance delta, Tt is the targe...
Page 50 - System Resources
8 System Resources Kontron User's Guide ETX CD 50 8 System Resources 8.1 Interrupt Request (IRQ) Lines In 8259 PIC mode: IRQ # Used For Available Comment 0 Timer0 No 1 Keyboard No 2 Slave 8259 No 3 COM2 No Note (1) 4 COM1 No Note (1) 5 LPT2 Yes Note (2) 6 Floppy Drive Controller No Note (1) 7 LPT1 N...
Page 52 - Memory Area; The following I/O ports are additionally used:; Peripheral Component Interconnect (PCI) Devices; Following SM bus addresses are reserved.
8 System Resources Kontron User's Guide ETX CD 52 5 Yes 6 Yes 7 Yes 8.3 Memory Area Upper Memory Used for Available Comment C0000h – CFFFFh VGA BIOS No D0000h – DDFFFh Yes shadow RAM (ISA bus restriction) DE000h – DFFFFh USB registers No E0000h – FFFFFh System BIOS No 8.4 I/O Address Map The I/O-por...
Page 54 - Limitations; ISA Bus; External LPT: Consumes one range if enabled
9 Limitations Kontron User's Guide ETX CD 54 9 Limitations 9.1 ISA Bus Memory accesses are not supported on the ISA bus. I/O accesses are only supported if they fall into one of the 4 generic decode ranges provided by the chipset. If a plugin ISA card is using registers in I/O space, this address ra...
Page 55 - BIOS Operation; Determining the BIOS Version; All; Setup Guide; Start Phoenix BIOS Setup Utility; Menu Bar
10 BIOS Operation Kontron User's Guide ETX CD 55 10 BIOS Operation The module is equipped with a Phoenix BIOS, which is located in an onboard Flash EEPROM. The device has 8-bit access. Faster access (16 bit) is provided by the shadow RAM feature. You can update the BIOS using a Flash utility. 10.1 D...
Page 56 - Legend Bar; Selecting an Item
10 BIOS Operation Kontron User's Guide ETX CD 56 Legend Bar Use the keys listed in the legend bar on the bottom to make your selections or exit the current menu. The table below describes the legend keys and their alternates. Key Function <F1> or <Alt-H> General Help window. <Esc> ...
Page 57 - BIOS Setup Menus; Info Screen
10 BIOS Operation Kontron User's Guide ETX CD 57 10.3 BIOS Setup Menus 10.3.1 Info Screen
Page 58 - Main Menu
10 BIOS Operation Kontron User's Guide ETX CD 58 10.3.2 Main Menu Feature Option Description System Time [hh:mm:ss] <Tab>, <Shift-Tab>, or <Enter> selects field System Date [mm-dd-yyyy] <Tab>, <Shift-Tab>, or <Enter> selects field Legacy Diskette A Disabled 360 kB...
Page 59 - IDE Channels Submenu
10 BIOS Operation Kontron User's Guide ETX CD 59 IDE Channels Submenu Feature Option Description Type User Auto None ATAPI Removable CD-ROM IDE Removable Other ATAPI Multi-Sector Transfers Disabled 2 Sectors 4 Sectors 8 Sectors 16 Sectors Specify the number of sectors per block for multiple sector t...
Page 60 - Advanced
10 BIOS Operation Kontron User's Guide ETX CD 60 10.3.3 Advanced
Page 61 - Advanced Chipset Control
10 BIOS Operation Kontron User's Guide ETX CD 61 Advanced Chipset Control Feature Option Description Enable Memory Gap Enabled Disabled
Page 62 - CPU Control; feature bit to always return 0.
10 BIOS Operation Kontron User's Guide ETX CD 62 CPU Control CPU control detects which processor core is used and displays an additional submenu with the detected processor core (yonah, merom, etc.). Feature Option Description Core Multi-Processing Enabled Disabled Enables and disables the 2nd CPU c...
Page 63 - Chipset control
10 BIOS Operation Kontron User's Guide ETX CD 63 Chipset control Feature Option Description Memory Throttling Enabled Disabled Controls throttling and bandwidth limiting for the 945 GME Clock generator Default Program "Program" allows to enable/disable manual change of Spread Spectrum and FS...
Page 64 - Integrated Video
10 BIOS Operation Kontron User's Guide ETX CD 64 Integrated Video Feature Option Description IGD - Device 2 Auto Disabled IGD - Device 2, Function 1 Auto Disabled DVMT 3.0 Mode Fixed DVMT Combo Selectes the mode of the DMBT graphic memory allocation Pre-Allocated Memory Size 1 MB 8 MB Sets the size ...
Page 65 - ISA Options
10 BIOS Operation Kontron User's Guide ETX CD 65 ISA Options Feature Option Description ISA Bridge Enabled Disabled Enables/disables the ISA bridge 8 Bit I/O recovery 3.5 SYSCLK 4.5 SYSCLK … 10.5 SYSCLK Sets the 8 Bit I/O recovery time 16 Bit I/O recovery 3.5 SYSCLK 4.5 SYSCLK … 7.5 SYSCLK Sets the ...
Page 66 - PCI/PNP Configuration
10 BIOS Operation Kontron User's Guide ETX CD 66 PCI/PNP Configuration Feature Option Description PNP OS installed Other Win95 Win98 WinMe Win2000 WinXP Selects the most used OS Reset Configuration Data No Yes "Yes" will clear the ESCD Option ROM Placement Disabled E000 Extension by PFA Temp...
Page 67 - PCI/PNP ISA UMB Region Exclusion
10 BIOS Operation Kontron User's Guide ETX CD 67 PCI/PNP ISA UMB Region Exclusion Feature Option Description C000 - CBFF CC00 - CFFF D000 - D3FF D400 - D7FF D800 - DBFF DC00 - DFFF Available Reserved
Page 68 - PCI/PNP ISA IRQ Resource Exclusion
10 BIOS Operation Kontron User's Guide ETX CD 68 PCI/PNP ISA IRQ Resource Exclusion Feature Option Description IRQ 3 IRQ 4 IRQ 5 IRQ 7 IRQ 9 IRQ 10 IRQ 11 Available Reserved
Page 69 - Cache Memory
10 BIOS Operation Kontron User's Guide ETX CD 69 Cache Memory Feature Option Description Memory Cache Enabled Disabled Enables/disables the memory cache system Cache System BIOS area Cache setting for System BIOS area Cache Video BIOS area Write Protect uncached Cache setting for System BIOS area Ca...
Page 70 - I/O Device Configuration
10 BIOS Operation Kontron User's Guide ETX CD 70 I/O Device Configuration Feature Option Description Parallel ATA Enabled Disabled Enables/disables the PATA Primary IDE UDMA66/100 Enabled Disabled Enables/disables UDMA 66/100 modes Serial ATA Enabled Disabled Enables/disables SATA SATA Controller Mo...
Page 71 - Lan Options
10 BIOS Operation Kontron User's Guide ETX CD 71 Lan Options Feature Option Description LAN Controller #1 Enabled Disabled Enables/disables the PATA Onboard LAN PXE ROM Enabled Disabled Enables/disables the LAN PXE boot ROM Enable WOL Enabled Disabled Enables/disables Wake on LAN
Page 72 - Super I/O Controller Options
10 BIOS Operation Kontron User's Guide ETX CD 72 Super I/O Controller Options Feature Option Description Onboard LPT Auto Enabled Disabled Enables/disables the Parallel Port Serial Port A Enabled Disabled Auto Enables/disables serial port A; Auto: will be initialized when detected Base I/O address 3...
Page 73 - USB ports
10 BIOS Operation Kontron User's Guide ETX CD 73 USB ports Feature Option Description USB Controller Enabled Disabled Enables/disables the USB controller USB UHCI Port 3 Enabled Disabled Enables/disables USB Port 3 (USB line 5 and 6, which are not accessible) USB EHCI Enabled Disabled Enables/disabl...
Page 74 - Console Redirection
10 BIOS Operation Kontron User's Guide ETX CD 74 Console Redirection Feature Option Description Console Disabled UCR COM A UCR COM B UCR COM C UCR COM D JRC, Auto Controls the serial console redirection. N/A
Page 75 - Keyboard Features Submenu
10 BIOS Operation Kontron User's Guide ETX CD 75 Keyboard Features Submenu Feature Option Description NumLock Auto On Off Selects Power-on state for NumLock Key Click Disabled Enabled Enables Key Click Keyboard auto-repeat rate 30/sec 26.7/sec 21.8/sec 18.5/sec 13.3/sec 10/sec 6/sec 2/sec Selects ke...
Page 76 - Hardware Monitor
10 BIOS Operation Kontron User's Guide ETX CD 76 Hardware Monitor
Page 77 - Watchdog Settings
10 BIOS Operation Kontron User's Guide ETX CD 77 Watchdog Settings Feature Option Description Mode Disabled Reset NMI Watchdog action Timeout 1sec 5sec 10sec 30sec 1min 5.5min 10.5min 30.5min Max. trigger periode Delay 1sec 5sec 10sec 30sec 1min 5.5min 10.5min 30.5min Time until watchdog timer start...
Page 78 - Display Control
10 BIOS Operation Kontron User's Guide ETX CD 78 Display Control Feature Option Description Display Mode CRT only LFP only CRT + LFP LFP + EFP CRT: Cathode Ray Tube LFP: LVDS flat panel (JILI) EFP: Embedded flat panel (sDVO) Flat Panel Type VGA 1x18 SVGA 1x18 XGA 1x18 XGA 1x24 SXGA 2x18 SXGA 2x24 UX...
Page 79 - Miscellaneous Submenu
10 BIOS Operation Kontron User's Guide ETX CD 79 Miscellaneous Submenu Feature Option Description Summary Screen Disabled Extended Display system configuration at boot Dark Boot Disabled Enabled Prevent diagnostic screen output during boot Dark Boot Logo 0 1 Use -/+ to select the Dark Boot logo 0 – ...
Page 80 - Security Menu
10 BIOS Operation Kontron User's Guide ETX CD 80 10.3.4 Security Menu Feature Option Description Set Supervisor Password [a..z;0..9;+-#…] Allows to set Supervisor Password Clear All Passwords Clear Supervisor and Administrative Password Password on boot Disabled Enabled Enables/Disables password for...
Page 81 - Power Menu
10 BIOS Operation Kontron User's Guide ETX CD 81 10.3.5 Power Menu Feature Option Description Enable ACPI No Yes En/Disable ACPI BIOS (Advance Configuration and Power Interface) Enable ACPI _Sx state None S1 S3 S1+S3 This option allows to selectively enable Sx standby states for ACPI OS. Choosing ‘N...
Page 82 - CPU Thermal Control Circuit
10 BIOS Operation Kontron User's Guide ETX CD 82 CPU Thermal Control Circuit Feature Option Description Thermal Control Circuit Disabled TM1 TM2 TM1 and TM2 Sets the mode of the Thermal Control Circuit PROCHOT# Enable Enabled Disabled This function engages the Thermal Control Circuit when enabled DT...
Page 83 - Boot Menu
10 BIOS Operation Kontron User's Guide ETX CD 83 10.3.6 Boot Menu Feature Option Descpription Boot priority order 1:USB Key 2:USB CDROM 3:IDE CE 4:IDE 0 5:IDE 1 6:IDE 2 7:IDE 3 8: Excluded from boot order IDE 4 IDE5 USB FDC USB HDD USB ZIP USB LS120 PCI SCSI Keys used to view or configure devices: U...
Page 84 - Exit Menu
10 BIOS Operation Kontron User's Guide ETX CD 84 10.3.7 Exit Menu Feature Description Exit Saving Changes Exit System Setup and save your changes to CMOS. Exit Discarding Changes Exit utility without saving Setup data to CMOS. Load Optimized Defaults Load customer specific default values Load Setup ...
Page 85 - Updating or Restoring BIOS; Cannot flash when memory managers are present.
10 BIOS Operation Kontron User's Guide ETX CD 85 10.4 Updating or Restoring BIOS Phoenix Phlash16 allows you to update or restore the BIOS with a newer version or restore a corrupt BIOS by using a floppy disk without having to install a new ROM chip. ® Get the Phoenix Phlash16 compressed file, CRDxM...
Page 86 - Preventing Problems When Updating or Restoring BIOS
10 BIOS Operation Kontron User's Guide ETX CD 86 10.5 Preventing Problems When Updating or Restoring BIOS Updating the BIOS represents a potential hazard. Power failures or fluctuations that may occur during updating the Flash ROM can damage the BIOS code, making the system unbootable. To prevent th...
Page 87 - Appendix A: JIDA Standard; JIDA Information
11 Appendix A: JIDA Standard Kontron User's Guide ETX CD 87 11 Appendix A: JIDA Standard Every board with an on-board BIOS extension supports the following function calls, which supply information about the board. Jumptec Intelligent Device Architecture (JIDA) functions are called via Interrupt 15h....
Page 88 - Appendix B: PC Architecture Information; Buses; AT IBM Technical Reference Vol 1&2, 1985; General PC Architecture
12 Appendix B: PC Architecture Information Kontron User's Guide ETX CD 88 12 Appendix B: PC Architecture Information The following sources of information can help you better understand PC architecture. 12.1 Buses 12.1.1 ISA, Standard PS/2 – Connectors ® AT Bus Design: Eight and Sixteen-Bit ISA, E-IS...
Page 89 - Ports; EIA; Serial ATA
12 Appendix B: PC Architecture Information Kontron User's Guide ETX CD 89 ® The PC Handbook: For Engineers, Programmers, and Other Serious PC Users, Sixth Edition, John P. Choisser and John O. Foster, Annabooks, 1997, ISBN 0-929392-36-1 12.2 Ports 12.2.1 RS-232 Serial ® EIA 232 E standard ® The ...
Page 91 - Appendix C: Document Revision
13 Appendix C: Document Revision Kontron User's Guide ETX CD 91 13 Appendix C: Document Revision Rev. Date Author Changes 0.3 17.04.07 UMA Created preliminary manual. 1.0 05.03.08 UMA Added power measurements, added BIOS setup notes, fixed small issues, added note at height specification, added chap...