Ingersoll Rand ES50T - Manual
Ingersoll Rand ES50T – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – NOTICE; Wiring diagrams for ES45T, ES50T and; Models ES45T, ES50T and ES50TC Electric Screwdrivers
- Page 3 – Troubleshooting Guide
- Page 4 – Related Documentation
45527801
Edition 1
May 2007
Save These Instructions
Electric Screwdrivers
ES45T, ES50T and ES50TC
Maintenance Information
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 45527801_ed1 WARNING Always wear eye protection when operating or performing maintenance on this tool. Always turn off the air supply and disconnect the air supply hose before installing, removing or adjusting any accessory on this tool or before performing any maintenance on this tool.Note: (When...
45527801_ed1 3 10. Motor Assembly replacement NOTE HOLE LOCATION BLUE RED (Dwg. TPD1052) Unsolder the two motor leads. Note the location of the red and blue leads to the hole in the side of the motor. Solder the motor leads to a new motor as illustrated above. Carefully check the Reverse Switch (9) ...
4 45527801_ed1 Trouble Probable Cause Solution Screwdriver runs in one direction but not the other Are wire leads in good condition and properly soldered? Defective solder connections. Resolder and rewire if necessary. Does Reverse Switch operate properly? Defective Reverse Switch (9). Replace it. B...
