Ingersoll Rand ES50T - Manuals

2 45527801_ed1 WARNING Always wear eye protection when operating or performing maintenance on this tool. Always turn off the air supply and disconnect the air supply hose before installing, removing or adjusting any accessory on this tool or before performing any maintenance on this tool.Note: (When...

45527801_ed1 3 10. Motor Assembly replacement NOTE HOLE LOCATION BLUE RED (Dwg. TPD1052) Unsolder the two motor leads. Note the location of the red and blue leads to the hole in the side of the motor. Solder the motor leads to a new motor as illustrated above. Carefully check the Reverse Switch (9) ...

4 45527801_ed1 Trouble Probable Cause Solution Screwdriver runs in one direction but not the other Are wire leads in good condition and properly soldered? Defective solder connections. Resolder and rewire if necessary. Does Reverse Switch operate properly? Defective Reverse Switch (9). Replace it. B...