Ingersoll Rand 637412 - Manual
Ingersoll Rand 637412 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – OPERATING AND SAFETY PRECAUTIONS
- Page 3 – Verify correct model / configuration prior to installation.
- Page 4 – COMMON PARTS
- Page 5 – View of two piece PTFE diaphragm; TORQUE REQUIREMENTS; ALL FASTENERS ARE METRIC.; LUBRICATION / SEALANTS
- Page 6 – AIR MOTOR PARTS; AIR MOTOR SECTION SERVICE; Air Motor Section Service is continued from Fluid Section repair.; AIR MOTOR SECTION DISASSEMBLY
- Page 7 – Figure 3
- Page 8 – TROUBLE SHOOTING; Product discharged from exhaust outlet.; DIMENSIONAL DATA; Figure 4; DIMENSIONS
E
2010
CCN 15214133
(800) 276-4658
D
FAX (800) 266-7016
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET -- BRYAN, OHIO 43506
1” DIAPHRAGM PUMP
OPERATOR’S MANUAL
PE10X-X-X-A0S
RELEASED:
9-15-04
REVISED:
11-13 - 10
(REV.06)
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
1:1 RATIO (METALLIC)
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
Refer to Model Description Chart to match the pump material options.
637401-XX for fluid section repair (see page 4). NOTE: This kit also con-
tains several air motor seals which will need to be replaced.
637412 for air section repair (see page 6).
PUMP DATA
Models
see Model Description Chart for “-XXX”.
. . . . . . . . . . . . .
Pump Type
Metallic Air Operated Double Diaphragm
. . . . . . . . . .
Material
see Model Description Chart.
. . . . . . . . . . . . .
Weight
PE10R-XAX-XXX-A0S
17.87 lbs (8.11 kgs)
. . .
. . .
PE10R-XCX-XXX-A0S
34.77 lbs (15.77 kgs)
. . .
PE10R-XHX-XXX-A0S
39.17 lbs (17.77 kgs)
. . .
PE10R-XSX-XXX-A0S
37.77 lbs (17.13 kgs)
. . .
add 5.26 lbs (2.39 kg) for Aluminum air motor section
add 11.43 lbs (5.18 kg) for Stainless Steel air motor section
Maximum Air Inlet Pressure
120 p.s.i.g. (8.3 bar)
. . . . . . . . .
Maximum Material Inlet Pressure
10 p.s.i.g. (0.69 bar)
. . . . .
Maximum Outlet Pressure
120 p.s.i.g. (8.3 bar)
. . . . . . . . . .
Maximum Flow Rate
(
flooded inlet
)
52.2 g.p.m. (197.6 l.p.m.)
. . . .
Displacement / Cycle @ 100 p.s.i.g.
0.232 gal. (0.88 lit.)
. . .
Maximum Particle Size
1/8” dia. (3.3 mm)
. . . . . . . . . . . .
Maximum Temperature Limits (diaphragm / ball / seal material)
E.P.R. / EPDM
-60
_
to 280
_
F (-51
_
to 138
_
C)
. . . . . . . . . . .
Hytrel
R
-20
_
to 150
_
F (-29
_
to 66
_
C)
. . . . . . . . . . . . . . .
Nitrile
10
_
to 180
_
F (-12
_
to 82
_
C)
. . . . . . . . . . . . . . . . .
Polypropylene
35
_
to 1
75
_
F (2
_
to
79
_
C)
. . . . . . . . . . .
Santoprene
R
-40
_
to 225
_
F (-40
_
to 107
_
C)
. . . . . . . . . . .
PTFE
40
_
to 225
_
F (4
_
to 107
_
C)
. . . . . . . . . . . . . . . . .
Viton
R
-40
_
to 350
_
F (-40
_
to 177
_
C)
. . . . . . . . . . . . . . . .
Dimensional Data
see page 8
. . . . . . . . . . . . . . . .
Mounting Dimension
4” x 6.25” (101.6 mm x 158.8 mm)
. . . . . . . .
Noise Level
@ 70 p.s.i., 60 c.p.m.
80.6 db(A)
{
. . . . .
The pump sound pressure levels published here have been updated to an Equivalent
Continuous Sound Level (L
Aeq
) to meet the intent of ANSI S1.13-1971, CAGI-PNEU-
ROP S5.1 using four microphone locations.
NOTICE: All possible options are shown in the chart, however, certain
combinations may not be recommended, consult a representative or the
factory if you have questions concerning availability
.
Figure 1
MODEL DESCRIPTION CHART
PE10 X - X X X - X X X - A0S
PE10X - XXX - X X X - A0S
637401 - X X
Diaphragm
Ball
FLUID SECTION SERVICE KIT SELECTION
EXAMPLE: Model # PE10A-ASP-AAA-A0S
Fluid Section Service Kit # 637401-AA
Seat Material
A - Santoprene
G - Nitrile
C - Hytrel
H - Hard 440 Stainless Steel
E - Carbon Steel
L - Hastelloy - C
F - Aluminum
S - 316 Stainless Steel
Diaphragm Material
A - Santoprene
M - Medical Grade Santoprene
C - Hytrel
T - / Santoprene
G - Nitrile
V - Viton
Hardware Material
P - Plated Steel
S - Stainless Steel
Fluid Caps & Manifold Material
A - Aluminum
H - Hastelloy - C
C - Cast Iron
S - Stainless Steel
Fluid Connection
A - 1 - 11-1/2 N.P.T.F. - 1
B - 1 - 11 BSP
Center Section Material
A - Aluminum
R - Polypropylene
S - Stainless Steel
Ball Material
A - Santoprene
S - 316 Stainless Steel
C - Hytrel
T - PTFE
G - Nitrile
V - Viton
www.ingersollrandproducts.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PE10X-X-X-A0S Page 2 of 8 OPERATING AND SAFETY PRECAUTIONS READ, UNDERSTAND, AND FOLLOW THIS INFORMATION TO AVOID INJURY AND PROPERTY DAMAGE. EXCESSIVE AIR PRESSURESTATIC SPARK HAZARDOUS MATERIALSHAZARDOUS PRESSURE WARNING EXCESSIVE AIR PRESSURE. Can cause person- al injury, pump damage or property ...
Page 3 of 8 PE10X-X-X-A0S GENERAL DESCRIPTION The ARO diaphragm pump offers high volume delivery even at low airpressure and a broad range of material compatibility options available.Refer to the model and option chart. ARO pumps feature stall resistantdesign, modular air motor / fluid sections.Air ...
MATERIAL CODE [A] = Aluminum [B] = Nitrile [C] = Carbon Steel [CI] = Cast Iron [Co] = Copper[E] = E.P.R. [H] = Hytrel [Ha] = Hastelloy-C[K] = PVDF (Kynar R ) [MSP]= Medical Grade Santoprene[P] = Polypropylene [SH] = Hard Stainless Steel[SP] = Santoprene[SS] = Stainless Steel[T] = PTFE [V] = Viton PE...
