Ingersoll Rand 2131 - Manual
Ingersoll Rand 2131 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – POWER
- Page 3 – Disassembly of the Throttle Mechanism; Disassembly of the Reverse Valve Mechanism; NOTICE
- Page 4 – Assembly of the Reverse Valve Mechanism; DOWEL
- Page 5 – Assembly of Throttle Mechanism
- Page 6 – Assembly of the Motor; Assembly of the Impact Mechanism; Assembly of the Air Wrench
- Page 7 – FRONT OF; Troubleshooting Guide
45481785
Edition 1
March 2007
Save These Instructions
Air Impact Wrench
2131 Series
Maintenance Information
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 45481785_ed1 WARNING Always wear eye protection when operating or performing maintenance on this tool. Always turn off the air supply and disconnect the air supply hose before installing, removing or adjusting any accessory on this tool or before performing any maintenance on this tool.Note: When ...
45481785_ed1 3 NOTICE To prevent damage to the Cylinder, do not tap or strike Cylinder on a hard or metallic surface when removing the Rotor Bearings (3). To remove the Front Rotor Bearing, hold the Front End Plate with Front Rotor Bearing down and tap the Front End Plate on a flat, nonmetallic surf...
4 45481785_ed1 REMOVAL OF FORWARD/ REVERSE BUTTONS (Dwg. TPD1328)2. Insert thumb into the front of the Housing and push down on the Reverse Valve so that it can be removed through the bottom of the handle. Refer to Dwg. TPD1329. REVERSE VALVE (Dwg. TPD1329) NOTICE Do not try to remove the Reverse Va...
