Page 3 - CEILING MOUNT INSTALLATION GUIDE; makes it easy to hang; tion must be performed in; Additional LiteMount Products; The LiteMount Pipe Tubing Extension (; Placing the Projector
1 CEILING MOUNT INSTALLATION GUIDE The LP 740 LiteMount TM makes it easy to hang your projector from the ceiling for fixed installa-tion use in meeting, auditorium and training room settings. WARNING: This installa- tion must be performed in compliance with your local building code require- ments. L...
Page 4 - C o n t e n t s; Contents; The LP 740 Ceiling Mount package contains:; load the ceiling mount can; Installation Guide
C o n t e n t s 2 Contents The LP 740 Ceiling Mount package contains: NOTE: The maximum load the ceiling mount can suppor t is 50 pounds. 1 Installation Guide 2 ceiling mount base boxdimensions: 11.6” x 10” x 1.5”weight: 4.2 lbs 3 projector mounting bracketdimensions: 12” x 7.8” x 1.5”weight: 2.2 lb...
Page 5 - WARNING: The ceiling
3 Install the Ceiling Mount Base Box on the Ceil-ing WARNING: The ceiling structure must be able to suppor t at least 5 times the weight of the projector and mounting hardware. If not, it must be reinforced according to your local building codes. Instructions for installing the ceiling mount on the ...
Page 6 - Install the base box to the LiteMount False Ceiling Plate
I n s t a l l t h e C e i l i n g M o u n t B a s e B o x o n t h e C e i l i n g 4 3 Place the ceiling plate or pipe extension in the ceiling so that the base box hangs down into the room. WARNING: If the dropped ceiling is an air- handling plenum, be sure the cables are plenum- rated, or install t...
Page 7 - Install the base box to the LiteMount Pipe Tubing Extension
5 F IGURE 2 Install the base box to the LiteMount Pipe Tubing Extension surface faces front false ceiling plate make sure this
Page 8 - A t t a c h t h e M o u n t i n g P l a t e t o t h e P r o j e c t o r; Attach the Mounting Plate to the Projector; CAUTION: Use only the; Attach the mounting plate to the projector
A t t a c h t h e M o u n t i n g P l a t e t o t h e P r o j e c t o r 6 Attach the Mounting Plate to the Projector 1 Set the projector on a table with the bottom side up. Align the holes in the mounting plate with the holes in the projector. CAUTION: Use only the hardware that is provided with the...
Page 9 - Hang the Projector on the Ceiling; Attach knurled knobs to the side of the base box
7 Hang the Projector on the Ceiling 1 Loosely install the 6 mm knurled knobs, flat washers, and conical spacers to the 2 hinge pins on the base box (Figure 4). F IGURE 4 Attach knurled knobs to the side of the base box 2 Make sure your cables are pulled through the center hole of the base box, then ...
Page 10 - H a n g t h e P r o j e c t o r o n t h e C e i l i n g; Install the projector in the ceiling base box; Insert the knurled knobs to adjust the angle
H a n g t h e P r o j e c t o r o n t h e C e i l i n g 8 F IGURE 5 Install the projector in the ceiling base box 4 Insert the remaining two 6 mm knurled knobs through the rear slots in the mounting bracket and into the holes on the sides of the base box. F IGURE 6 Insert the knurled knobs to adjust...
Page 12 - I n v e r t i n g t h e I m a g e; Disconnect all cables.; ADJUSTING THE IMAGE; Press the
I n v e r t i n g t h e I m a g e 10 When you need to remove the projector or replace the lamp or clean the air filter: 1 Disconnect all cables. 2 Hold the projector from underneath. 3 Remove the knurled knob that holds the pro-jector to the mounting plate. 4 Slide the projector to release it from t...
Page 13 - Limited Warranty; Warranty Limitation and Exclusion
11 Limited Warranty In Focus Inc. warrants that each “ceiling mount” sold hereunder will conform to and function in accordance with the written specifications of In Focus. Said limited warranty shall apply only to the first person or entity that purchases the Product for personal or business use and...
Page 14 - INSTALLATIONSANLEITUNG FÜR DIE DECKENBEFESTIGUNG; Mit dem LiteMount; der LP-Serie 740 können; Installation muß gemäß; LiteMount-Zusatzprodukte; ) ist für abgehängte Decken mit
13 INSTALLATIONSANLEITUNG FÜR DIE DECKENBEFESTIGUNG Mit dem LiteMount TM der LP-Serie 740 können Sie Ihren Projektor mühelos zur permanenten Verwendung in Besprechungs-, Vortrags- und Schulungsräumen an der Decke befestigen. WARNUNG: Diese Installation muß gemäß den jeweils geltenden Bau- vorschrift...
Page 15 - P l a z i e r u n g d e s P r o j e k t o r s; Plazierung des Projektors; HINWEIS: Die maximale; Installationsanleitung
P l a z i e r u n g d e s P r o j e k t o r s 14 Plazierung des Projektors Um die optimale Deckenbefestigungsposition für Ihre Projektionsansprüche zu bestimmen, schlagen Sie bitte die Bildentfernung, die Bild-größe und den Projektionswinkel im LP 740 Benutzerhandbuch nach. Lieferumfang Das Paket mi...
Page 17 - Befestigung des Sockels an der LiteMount-Zwischendeckenplatte
L i e f e r u m f a n g 16 3 Montieren Sie die Deckenplatte bzw. die Rohrverlängerung so an der Decke, daß der Sockel in den Raum herabhängt. 4 Führen Sie die Projektorkabel durch die öffnung in der Decke (Abbildung 7). WARNUNG: Handelt es sich bei der abgehäng- ten Decke um einen Luftverteilerkaste...
Page 18 - Befestigung des Sockels an der LiteMount-Rohrverlängerung
17 A BBILDUNG 2 Befestigung des Sockels an der LiteMount-Rohrverlängerung Sockelvorderseitenach vorne zurLeinwand gerichtetist
Page 19 - L i e f e r u m f a n g; Die Montageplatte am Projektor befestigen; Montage der Befestigungsplatte am Projektor
L i e f e r u m f a n g 18 Die Montageplatte am Projektor befestigen 1 Stellen Sie den Projektor mit der Unterseite nach oben auf einen Tisch. Richten Sie die Löcher in der Montageplatte an den Löchern im Projektor aus. ACHTUNG: Verwenden Sie nur die mit der Deckenbefestigung für Projektor der Serie...
Page 20 - Den Projektor an der Decke aufhängen; Anbringung von Rändelknopf an der Seite des Sockels
19 Den Projektor an der Decke aufhängen 1 Stecken Sie die Rändelknopf, Unterlegschei-ben und Abstandshalter an jeder Seite des Sockels zusammen, wie in Abbildung 4 gezeigt. A BBILDUNG 4 Anbringung von Rändelknopf an der Seite des Sockels 2 Heben Sie den Projektor vorsichtig hoch, und drehen Sie ihn ...
Page 21 - Befestigung des Projektors am Deckensockel
L i e f e r u m f a n g 20 A BBILDUNG 5 Befestigung des Projektors am Deckensockel 4 Setzen Sie die beiden letzten 6-mm-Rändel-knopf durch die Schlitze im Befestigungsbü-gel in die Löcher auf der Sockelseite ein. Ziehen Sie sie von Hand an. A BBILDUNG 6 Setzen Sie die beiden letzten 6-mm-Rändelknopf...
Page 23 - D a s B i l d i n v e r t i e r e n; Halten Sie den Projektor von unten fest.; DAS BILD EINSTELLEN
D a s B i l d i n v e r t i e r e n 22 So reinigen Sie den Luftfilter oder die Lampe aus-tauschen: 1 Halten Sie den Projektor von unten fest. 2 Entfernen Sie den Rändelknopf, mit dem der Projektor an der Befestigungsplatte montiert ist. 3 Schieben Sie den Projektor, um ihn von den Schnelltrennmuffen...
Page 24 - Eingeschränkte Garantie; Einschränkung und Ausschluß der Garantie
23 Eingeschränkte Garantie In Focus Inc. garantiert, daß jede Deckenbefestigung ("Produkt"), die unter dieser Garantie verkauft wird, den schriftlichen Spezifikationen von In Focus entspricht und dementsprechend funktioniert. Die einge-schränkte Garantie gilt nur für die erste Person bzw. Or...