Infinity TSS-SUB4000 - Manual

Page 2 - CONTENTS

CONTENTS BASIC SPECIFICATIONS . . . . . . . . . ………………………………………….1 DETAILED SPECIFICATIONS . . . . . . . . . . . ………………………………….2 CONTROLS. ………………….. .. . …………………………………... . . . . . . .4 CONNECTIONS . . . . . . . . . . . ……….………………………………..…. . . . 5 OPERATION……. . . . . .. . . . . . . . .. .. . . . ....

Page 3 - TSS-4000 subwoofer 300W Powered Sub/ Plate Amp

TSS-4000 subwoofer 300W Powered Sub/ Plate Amp LINE VOLTAGE Yes/No Hi/Lo Line Nom. Unit Notes US 120vac/60Hz Yes 108-132 120 Vrms Normal Operation EU 230vac/50-60Hz No 207-264 230 Vrms Normal operation, MOMS required Asia 100vac/50Hz No 90-110 100 Vrms Normal Operation Parameter Specification Unit Q...

Page 5 - Rear Panel; ONTROLS AND

TSS-SUB4000 Rear Panel C ONTROLS AND C ONNECTIONS ¡ Subwoofer Level (Volume) Control ™ Line-Level Inputs £ Normal/LFE Low-Pass Selector ¢ Phase Switch ∞ Power Switch Room Adaptive Bass Optimization System Controls (see page 5) § R.A.B.O.S. Selector ¶ R.A.B.O.S. Level Adjustment • R.A.B.O.S. Bandwidt...

Page 6 - ONNECTIONS; If you have a Dolby* Digital or DTS

TSS-SUB4000 C ONNECTIONS If you have a Dolby* Digital or DTS ® receiver/processor with a low-frequency-effects (LFE) output: • Set Low-Pass Switch to Off. NOTE: In this case, you do not need to use a Y connector. Simplyconnect the LFE output on your receiver/processor to either the left or right inp...

Page 7 - PERATION; Phase Control

Power On Plug your subwoofer’s AC cord into a wall outlet. Do not use theoutlets on the back of the receiver. Initially set the Subwoofer Level (Volume) Control ¡ to the “min” position. Turn on your sub by pressing the Power Switch ∞ on the rear panel. Auto On/Standby With the Power Switch ∞ in the ...

Page 12 - TSS-Sub4000 Testing Flow Chart

TSS-Sub4000 Testing Flow Chart yes no no yes yes no yes no yes no yes no yes no yes no no yes yes no Start Dc voltage check ±Vcc,±15V OK Check transformer C 168, C 169 ,D 123 , D 124, C 170 Power on check LED red &blue OK Check vol module & connector cable& ±15V.ect Check THD output powe...

Page 13 - NOTICE; the PCB plug will allow the amp to be removed even further.

NOTICE The main power transformer (toroid) part# 150-r1107008 in the TSS-SUB4000 is not mounted in the amplifier inside the amp cover, but mounted in the cabinet in a separate location. Replacement: To replace the power transformer, it is necessary to remove the woofer from the cabinet. The mounting...

Page 16 - CLASS D AMP PCB

Part Number Description Qty Reference Designator INPUT/RABOS PCB Capacitors 129-a102j633 metalized Capacitor 0.001uF 63V ± 5% MSC 1 C148 129-a103j633 metalized Capacitor 10NF 63V 1 C183 129-a104j633 metalized Capacitor 0.1U 63V ± 5% MSC 6 C116,137,138,139,143,118 129-a223j633 metalized Capacitor 0.0...

Page 32 - PACKAGE

Ref # Description Part Number Qty 1 Owner’s Manual 406-000-05133 1 2 Warranty Card 405-000-00328 1 3 Top/Bottom Packing 431-000-05293 2 4 Plastic Bag 1 5 RABOS Kit 335852-003 1 6 Silica Gel 3 7 Outer Carton 402-000-05237 1 8 n/a 9 15ft. RCA cable 166-015F011 1 10 TSS-SUB4000 TSS-SUB4000PLT 1 TSS-SUB...

Infinity TSS-SUB4000 - Manual

Table of Contents:

Summary

Other Infinity Models