Page 2 - Contents; retain them for future use.
Contents 2 Introduction 3 Safety Information 4 Oven Timer Operation (KD643G only) 6 Hotplate 12 Grill 14 Main Oven 16 Main Oven Cooking Charts 17 The “Slow Cook” Setting 19 Top Oven (KD643G and KD641G only) 20 Top Oven Cooking Charts (KD643G and KD641G only) 21 Care and Cleaning 23 Something Wrong W...
Page 3 - Introduction
To help you make the best use of your cooker, PLEASE READ THIS BOOKLETCAREFULLY. Your new cooker is guaranteed and will give lasting service. The guarantee is onlyapplicable if the cooker has been installed in accordance with the InstallationInstructions. The cooker is designed specifically for dome...
Page 4 - Please read the precautions below before using your cooker.; Safety Information
Please read the precautions below before using your cooker. ALWAYS . . . ALWAYS make sure you understand the controls before using the cooker. ALWAYS check that all controls on the cooker are turned off after use. ALWAYS stand back when opening an oven door to allow heat to disperse. ALWAYS use dry,...
Page 7 - TIMER FUNCTION BUTTONS
7 Know your Timer (KD643G only) CLOCKFACE The timer incorporates a 24 hour clock.Ensure the correct time of day is always set, before using your cooker. SYMBOLS A ‘bell’ symbol will light up when you select a Minute Minder Period and willremain lit for the period set. At the end of the Minute Minder...
Page 8 - SETTING THE TIME OF DAY; SETTING THE MINUTE MINDER
8 Electronic Clock & Automatic Oven TimerOperation (KD643G only) SETTING THE TIME OF DAY Step 1 Make sure all oven controls are turned Off. Step 2 Check the electricity supply to the cooker is turned on. Step 3 When switched on the display will show 0.00 and the Auto symbol, flashing intermitten...
Page 9 - AUTO COOKING PROGRAMMES; a) TO SET THE TIMER TO SWITCH THE OVEN(S) ON AND OFF AUTOMATICALLY
9 Electronic Clock & Automatic Oven TimerOperation (KD643G only) Step 3 Press and hold in the Cook Period button. The display will read 0.00 with the ‘cookpot’ symbol lit. Step 4 With the Cook Period button still held in, set the required Cook Period using the “+” and “–” buttons. Release the bu...
Page 10 - PERIOD
10 Electronic Clock & Automatic Oven TimerOperation (KD643G only) Step 4 Press & hold in the Cook Period button, the display will read 0.00 and the ‘cookpot’ symbol will light up. With the Cook Period button still held in set the required Cook Period using the“+” and “–” buttons. Example: 1h...
Page 11 - TO CANCEL AN AUTO COOKING PROGRAMME BEFORE
11 Electronic Clock & Automatic Oven TimerOperation (KD643G only) OTHER NOTES ON TIMER OPERATION 1. When cooking Automatically the Cook Period can be checked at any time simply by pressing the Cook Period button. 2. When cooking Automatically the End Time can be checked at any time by simply pre...
Page 12 - TO USE THE HOTPLATE; Turn the control knob anti-clockwise to the desired setting.; To turn off, turn the control knob fully clockwise to the symbol O.; Hotplate; ALWAYS PUSH IN THE CONROLS WHEN TURNING ANY OF THE BURNERS ON OR OFF.
The hotplate has two high speed burners and two simmering burners which willaccommodate pans between 100mm (4”) and 230mm (9”) diameter. All pansshould be positioned centrally over the burners. TO USE THE HOTPLATE 1. Press the ignition button and then push in and turn the control knob of the chosen ...
Page 13 - SAFETY REQUIREMENTS FOR DEEP FAT FRYING; Never fill chip pans more than one third full with oil or fat.; HOW TO DEAL WITH A FAT FIRE; Leave the pan for at least 60 minutes before moving it.
13 SAFETY REQUIREMENTS FOR DEEP FAT FRYING 1. Never fill chip pans more than one third full with oil or fat. 2. Never leave oil or fat unattended during the heating or cooling period. 3. Never heat fat or fry with a lid on the pan. 4. Always dry food thoroughly before frying, and lower it slowly int...
Page 14 - To turn off, turn the control knob anti-clockwise to the symbol O.; the heat and create a fire hazard.; Grill
14 TO USE THE GRILL1. Check that the electricity supply is switched on. 2. Open the top oven/grill door and remove the grill pan. 3. Remove the heat shield from the rear of the shelf for maximum grilling area. 4. Place shelf in chosen position. Refer to grilling chart. 5. Press the ignition button a...
Page 16 - TO USE THE MAIN OVEN; To turn off, turn the control knob fully clockwise to the symbol O.; COLD START COOKING; Main Oven
The oven has different heat zones – the thermostat settings refer to the temperature on the middle shelf position; above this shelf it is hotter and below it is cooler. Two shelves provide five possible cooking levels enabling full use of the different temperatures inside the oven.Each shelf has a s...
Page 17 - Main Oven Cooking Chart
The following times and setting are for guidance only. You may wish to alter the setting to give aresult more to your satisfaction. When a different setting to that shown below is given in a recipe, therecipe instructions should be followed. Allow 15 minutes preheat for best results. Always turn the...
Page 19 - USING THE ‘SLOW COOK’ SETTING FOR SLOW COOKING; be cooked using the ‘Slow Cook’ setting.; The ‘Slow Cook’ Setting
The ‘Slow Cook’ setting is used for slow cooking, keeping food warm and warming platesfor short periods. Set the main oven thermostat to ‘S’ or ‘90˚C’. USING THE ‘SLOW COOK’ SETTING FOR SLOW COOKING 1. All dishes cooked by the ‘Slow Cook’ setting should be cooked for a minimum 6 hours. They will ‘ho...
Page 20 - Check that the heat shield is fitted to the shelf.; To turn off, turn the control knob clockwise to the symbol O.
The top oven can be used to cook small quantities of food or used in conjunction withthe main oven to provide additional cooking space. The shelf in the top oven has a heat shield fitted at the rear. The shield can be removedfor cleaning and grilling, but must be replaced when using the oven. The sh...
Page 23 - OVEN SHELF SUPPORTS; Care and Cleaning
Before moving your cooker ensure that it is cool and note that it is heavy(approximately 70 kg 155 lbs), so you may require assistance. To move the cookerforward, open the top oven/grill door and with both hands positioned under the roofof the compartment, lift and pull forward. Replace by pushing t...
Page 24 - Fit new bulb and refit lens.
24 COOKER FINISH CLEANING METHOD Vitreous EnamelHotplate, pan supports,hotplate front trim,burner caps, roasting dish, grill pan, main oven base,inside of grill compartment,inside of doors. Cloth wrung out in warm soapy water. Stubbornstains can be removed with a cream paste,liquid cleaner or by rub...
Page 25 - CLEANING THE DOORS; Turn the brackets so that the glass can be; NEVER OPERATE THE COOKER WITHOUT THE INNER DOOR GLASS; Refit the door inner glass as follows.
25 Take particular care not to damage the inner surface of the door inner glass thatis coated with a heat reflective layer. Do not use scouring pads, or abrasivepowder, which will scratch the glass. Ensure that the glass panel is not subjectedto any sharp mechanical blows.Stubborn stains can be remo...
Page 26 - Something Wrong with your Cooker?
26 PROBLEM Before contacting your nearest Service Centre or Installer, check the problemguide below, there may be nothing wrong with your cooker. CHECK Ignition does not work. Burner ports Ignitor Burner ports Ignitor Burner ports Ignitor Oven burner Grill burner Hotplate burner. If all burners fail...
Page 28 - Category I; , it will require an air; Installation Instructions
Prior to installation, ensure that the local distribution conditions (nature of the gas andgas pressure) and the adjustment conditions are compatible. The adjustmentconditions for this appliance are stated on the data badge which is fitted on the backpanel.This appliance is not designed to be connec...
Page 33 - WARNING –; - Electrical Connection
Connection to the electricity supply should be made via a properly earthed, readily accessiblewall socket which is adjacent to but not directly above, and not more than 1.25m away from theappliance and capable of electrical isolation.The mains lead should be routed such that it cannot touch hot part...
Page 34 - Instruct the user on operation of the cooker.
INSTALLATION AND OPERATIONAL CHECKSAfter installation, check for gas soundness. The supply pressure can be checked at thegrill injector. Access to the injector is by first removing the baffle at the front of the grillfastened by two screws. Then remove the fastening screw on the right hand side of t...
Page 35 - Contact the Service Office (; Disposal of your product
35 If It Still Won’t Work... To minimise the risk of injury to children please dispose of your product carefully andsafely. Remove all doors and lids. Remove the mains cable (where fitted) by cutting offflush with the appliance and always ensure that no plug is left in a condition where itcould be c...
Page 36 - Indesit; K e y C o n t a c t s; After Sales Service; Repair Service and Information Help Desk; Extended Warranties; Genuine Parts and Accessories
PRINTED BY SIMLEX . FOUR ASHES, WOLVERHAMPTON. 07/2005 195045065.02 Indesit Company UK Limited, Morley Way, Peterborough, PE2 9JB K e y C o n t a c t s After Sales Service Over 1100 trained specialists, directly employed by us, ensure that you can have complete confidence in both the appliances and ...
