Hyundai HQP421HR- User Manual

HYUNDAI Plasma Display Image Sticking Precaution Still Image/Panorama/Wide/4:3 in motion Image  • Precaution : - Image Sticking could be come from Still Image and Boundary line for a long time display and Brightness gap in Boundary. - This Matter(Image Sticking) is same thing under the other PDP's ...

Features A Wide Array of Screen Settings You can choose different screen settings depending on the type of program you are watching or thesurrounding conditions (the lighting or the outside weather conditions).You can switch among Standard, Dynamic, Movie and Mild options or you can configure the sc...

HYUNDAI Plasma Display Table of Contents General Information Safety Precaution ................................................................ 5 Contents of the Package .................................................... 11 Separately Sold Products ....................................................

GENERAL INFORMA TION 5 WARNING WARNING Safety Precaution The contents of this section are provided for the safety of users and their property.Please read the instructions carefully before using. Do not install in a place where thereis oil, smoke, excessive humidity, orwhere water may be sprinkled,dr...

9 GENERAL INFORMA TION Safety Precaution ......................................Continued from previous page The contents of this section are provided for the safety of users and their property.Please read the instructions carefully before using. ALERT Do not allow children to climb orplay on the PDP...

GENERAL INFORMA TION 11 Contents of the Package To purchase additional parts, consult a distributor or selling agent. Separately Sold Products If you want to purchase separately sold products, consult a service center, electronics shops, or parts seller. Desk type speaker Desk type stand Desk type s...

HYUNDAI Plasma Display GENERAL INFORMA TION 12 Wall mounting frame Adjustable wall mounting frame Ceil mounting frame PC signal cable Scart cable S-video cable Component(Y, Pb, Pr) cable Composite(Video & Audio) cable DVI PC video(digital) cable

GENERAL INFORMA TION Parts Names and Functions Front View 13 Power button Use this button to turn on or off the PDP. Volume buttons Use these buttons for your desired sound level.These buttons also serve as the cursor ofSelect/Adjust when in Menu mode. Channel buttons Use these buttons to change cha...

HYUNDAI Plasma Display GENERAL INFORMA TION 14 Rear View Sub woofer output If you wish to reproducethe lower bass frequencies,please connect the cable toyour Subwoofer speakerwith *AMP. RS-232 input terminal Connect to the RS-232terminal of a PC for theservice check. *For the control method using th...

GENERAL INFORMA TION 15 Remote Control POWER/STANDBY Use this button to turn the TV set on or off. MUTE Use this button to turn the sound off completely. NUMERIC KEYS Use these buttons to select channels. P R E V I E W Use this button to return to the previous channel. ASPECT RATIO Use this button t...

HYUNDAI Plasma Display 16 GENERAL INFORMA TION Press and hold ∆ part and push to open cover. 1 2 3 Insert batteries with properpolarities of + and - . Use the remote control with coverclosed. S.MODE Use this button to display types of audio signalscurrently aired on TV. Or you can use this button to...

How To Install Wall Hanger Support 1. Caution 1. Install on the vertical wall surface only. 2. Do not install on the following places to protect the performance of PDP and to prevent malfunction. Near sprinkler Detector Near heating devices Places where vibration or shock may be applied Near high vo...

How To Install Wall mount frame 20 GENERAL INFORMA TION HYUNDAI Plasma Display 4. Installation Method 1. Unscrew screws fasted on four spots on the back of PDP. 2. Fasten the screws and plastics for mount frame on the spot where screws were as shown on the picture. 3. Fix the wall mount frame on the...

21 GENERAL INFORMA TION How To Install Desktop Stand 1. Place the PDP body on a flat desk or shelf. Clean the surface of the desk or shelf in order to prevent scratch on the product. 2. Align the stand with PDP body below and fasten the stand bars using 4 fixing screws.3. After the assembly is over,...

HYUND AI PL ASMA DISPL A Y Connecting Indoor/Outdoor TV Antenna (UHF/VHF) ................ 23 Connecting to the antenna input connectionon the external equipment ..................................................... 24 Before connecting the video/audio connections toexternal devices ...................

,-.'$!/-)* '"..$!/-)* -0*$10 23,'4",'5 316(&$/&7+&!1*($10 316(&$/&7+&!1*($&"* -0*$10 23,'4",'4/-#.(5 -0*$10 23,'4",'4/-#.(5 Coaxial cable Coaxial cable Antenna cable Antenna cable 23 CONNECTIONS Connecting Indoor/Outdoor TV Antenna(UHF/VHF) Connection ...

CONNECTIONS 25 Before connecting the video/audio connections to external devices ..... Please make sure to read the following information on connection to enjoy best picture quality. Video/Audio connectors Types of video/audio cable : ➀ DVI-D ➁ 15-Pin D-Sub ➂ COMPONENT ➃ S-VIDEO ➄ COMPOSITE ➅ FULL S...

HYUNDAI Plasma Display CONNECTIONS 26 Connecting a VCR, Cable/Satellite Receiver Connection Method Connect Video/S-Video cable between Video/S-Video output terminal of VCR or Cable/Satellite receiver andVideo/S-Video input terminal of PDP.(Connect cables and terminal in the same colors) Connect Audi...

27 CONNECTIONS Connecting a DVD Player Connection Method Connect video cables(Y, Pb, Pr) between output terminals(Y, Pb, Pr) of DVD player and the input terminals(Y, Pb, Pr) of DVD(480i/480p/720p/1080i) on the rear of PDP. (Connect cables and terminal in the same colors) Connect Audio cable between ...

HYUNDAI Plasma Display CONNECTIONS 28 Connecting a DTV(Digital Broadcast) Receiver Connection Method Connect video cables(Y, Pb, Pr) between output terminals(Y, Pb, Pr) of DTV Receiver and the input terminals(Y,Pb, Pr) of DTV(480p/720p/1080i) on the rear of PDP. (Connect cables and terminal in the s...

CONNECTIONS 29 Playing Back a Tape Recorded On a Camcorder Connection Method Connect Video cable between Video output terminal of Camcoder/Game player and Video input terminal ofPDP.(Connect cables and terminal in the same colors) Connect Audio cable (left:white color, right:red color) between Audio...

CONNECTIONS 31 Resolutions Supported in PC * Recommended Resolution is 1024x768@60Hz : HQP421HR / HQP501HR* Recommended Resolution is 800x600@60Hz : HQP421SR Resolution 31.47 37.86 31.47 37.86 37.50 43.27 31.47 37.88 48.08 46.88 53.67 49.72 48.36 60.02 68.68 Vertical frequency 70.09 85.08 59.94 72.8...

HYUNDAI Plasma Display 32 CONNECTIONS Video Game Device Video Disc Player Satellite Receiver When switching voltage comes into the Scart-Pin 8 during viewing a TV program, the current mode will beswitched to Scart mode. Scart Connection to the External Input/Output Connection Method This end can be ...

33 CONNECTIONS Scart Pin Specifications If you wish to connect other equipment via the scart connectors on your TV, contact your dealer or a qualifiedtechnician to wire the A/V cable as illustrated below. P I N SIGNAL 1 Audio Output R 2 Audio Intput R 3 Audio Output L 4 Audio Intput GND 5 Blue Intpu...

How to Select the Picture Mode ............................................. 35 How to Set the Desired Picture ............................................... 36 How to Set Blue Screen .......................................................... 37 How to Set Film Mode ...................................

35 PICTURE SETUP Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “Picture” icon. Press Left and Right buttons to select “MODE”. Press Left and Right buttons, then the menu changes in order below. STANDARD DYNAMIC MOVIE MILD USER Press MENU button after the se...

36 PICTURE SETUP HYUNDAI Plasma Display How to Set the Desired Picture Users can manually adjust the picture in their own ways. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “Picture” icon. Press Left and Right buttons to select “PICTURE” Press Up and Down ...

PICTURE SETUP 37 In the status of Blue Screen active, when the main picture receives no signal during watching a TV or VCRprogram as a main picture while viewing a VCR or TV program as a sub picture in PIP mode, the entire screen(including both main and sub pictures) will turn blue. When the main pi...

How to Set Film Mode Set Film Mode to receive a crisp, clear picture without flickering. 38 PICTURE SETUP HYUNDAI Plasma Display You may experience the distortion of the screen edge during a DVD or VCR playback. This may be caused bybad edit of a film (a DVD title or tape). If you have come across t...

How to Select a Color Temperature Users can adjust Color as users want. 39 PICTURE SETUP MENU 1 2 3 4 EXIT Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “Picture” icon. Press Left and Right button to select “PICTURE”. Press Up and Down button to move to “CO...

Hot-Keys on the Remote Control How to Directly Turn PIP FUNCTION ON/OFF : Press button. To turn ON/OFF the PIP function How To Directly Adjust PIP MODE & SIZE : Press button. To watch PIP/TWIN ways or to adjust the Size of Sub picture. Large Small TWIN How To Directly Change Sub Source : Press b...

HYUNDAI Plasma Display 44 PICTURE SETUP How to Set Noise Reduction This is to eliminate some noise on the screen in Video mode. In the Noise Reduction, the more you reduce the screen noise, the more the sharpness level of the picturesmay become degraded. Press Menu button. Menu items appear on the s...

45 PICTURE SETUP How to Select the Fit(Fine Image Technology) Engine Mode Fit Engine mode function allows users to experience more lively, clearly and brightly images. (For 50” PDP only) Only In the FIT ENGINE demo mode, Demo OSD can appear on the screen after 1 or 2 seconds. Press Menu button. Menu...

HYUNDAI Plasma Display How to Select the Audio Mode ............................................... 47 How to Set the Desired Audio ................................................. 48 How to Select AVL ................................................................... 49 How to Select SRS WOW .......

How to Select the Audio Mode Users can adjust sound mode automatically as users want. How To Directly Select Picture Mode : Press button. Users can select STANDARD MUSIC MOVIE NEWS USER in order. 47 SOUND SETUP Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to ...

48 SOUND SETUP HYUNDAI Plasma Display How to Set the Desired Audio Users can manually adjust the sound in thier own ways. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “SOUND” icon. Press Left and Right buttons to select “SOUND”. Press Up and Down buttons t...

SOUND SETUP 49 How to Select AVL This function automatically gives a similar volume size to each channel. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “SOUND” icon. Press Left and Right buttons to select “SOUND”. Press Up and Down buttons to move to “AVL”....

51 SOUND SETUP How to Select S. Mode Users can adjust S. Mode as users want. How To Directly Select S. Mode : Press button. During FM MONO broadcast, pressing the S.MODE key will display the current status.(On the OSD lit, pressing the S.MODE key a second time will make no change.) When in AV mode, ...

53 SOUND SETUP How to Set the Output of Subwoofer You can set this function when you wish to install your subwoofer speaker system. - The frequencies in the entry are the subwoofer’s frequency range.- You make sure to use a subwoofer speaker system with built-in amplifier. Press Menu button. Menu it...

HYUNDAI Plasma Display Storing channel Automatically ................................................ 55 Storing channel Manually ....................................................... 56 Assigning Names to Channel .................................................. 58 Skipping Unwanted Channels ......

55 CHANNEL SETUP Storing Channels Automatically You can scan channels available to you and their availablity depends on your country. Automatically allocatedprogramme numbers may not correspond to actual or desired programme numbers. However, you can sort the numbersmanually and clear any channels y...

HYUNDAI Plasma Display 56 CHANNEL SETUP Storing Channels Manually You can store the TV channels, including those received via cable networks when storing channels. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “CHANNEL” icon. Press Left and Right buttons to...

HYUNDAI Plasma Display CHANNEL SETUP 58 Assigning Names to Channel Channel names will be assigned automatically when channel information is broadcast.These names can be changed, allowing you to assign new names. Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to...

Skipping Unwanted Channels You can exclude the channels of your choice from the channel scan operation. When you scan through thestored channels, those that you have chosen to skip are thus not displayed.All channels that you do not specifically choose to skip are displayed during scanning. 59 CHANN...

HYUNDAI Plasma Display CHANNEL SETUP Sorting the Stored Channels This operation allows you to change the program number of stored channels.This operation may be necessary after using auto store. 60 10 9 11 12 13 14 15 16 Press Up and Down buttons to move to “SORT”. Press Left and Right buttons to se...

Activating the Child Lock This feature allows you to lock the television so that it cannot be controlled by manaul keys.It can however still be controlled by the Remote Control. Thus by keeping the Remote Control awayfrom unauthorised users such as children, you can prevent them from accessing unsui...

Fine Tuning Channel Reception If the reception is clear, you do not have to fine tune channels, as this is done automatically during the searchand store operation. If the signal is weak or distorted, you may have to fine tune the channel manually. 62 CHANNEL SETUP HYUNDAI Plasma Display EXIT MENU 1 ...

Teletext Feature Most TV channels provide written information services via teletext.Information provided includes with the next entry it is same : Teletext information is often divided between several pages displayed in sequence,which can be accessed by : Teletext OSD(On-Screen-Display) Picture HYUN...

66 CHANNEL SETUP HYUNDAI Plasma Display TTX TV or VCR, DVD, PC TTX TV or VCR, DVD, PC DISPLAY(ACTION) • FLOF INDEX (Full Level One Facilities) • TOP INFO. (Table of Page) • To Store Page • Return to List or FLOF mode BUTTON INDEX STORE LIST/FLOF You can view TTX information while watching other prog...

HYUNDAI Plasma Display How to Select the Aspect Ratio .............................................. 69 Displaying Information ............................................................ 71 How to Set Key-Lock .............................................................. 72 Using the Pixel Shift /...

How to Select the Aspect Ratio Users can adjust Aspect Ratio as users want. How To Directly Select Aspect Ratio : Press button. OSD menu displays the current aspect ratio.If you press the ASPECT button second time, aspect ratio will be changed according to Input mode as follows : - Under DTV, DVD in...

70 FUNCTION SETUP HYUNDAI Plasma Display General broadcast picture is adjustedto 16:9. WIDE / AUTO WIDE General picture size. NORMAL Picture size for panorama video. PANORAMA Zoom in 16:9 in vertical direction. ZOOM1 The picture enlarged to 16:9 format.This mode is recommended in letterbox format. Z...

71 FUNCTION SETUP Displaying Information You can view the channel information and setting status by pressing the “INFO” button on the remote control. In case of applying TV input Press INFO button. In case of applying VIDEO input Press INFO button. In case of applying PC input Press INFO button. If ...

73 FUNCTION SETUP 3 MENU 4 4 EXIT Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “FUNCTION” icon. Press Left and Right buttons to select “FUNCTION”. Press Up and Down buttons to move to “PIXEL SHIFT” or “FULL WHITE”. Press Left and Right buttons to “ON/OFF”....

How to Freeze Picture The user can temporarily stop the playing picture. 74 FUNCTION SETUP HYUNDAI Plasma Display Press Still button. Playing picture is stopped. - Under multi-screen mode(PIP, TWIN), the main picture stops. To deselect Still function. Press Still button once more. STILL

How to Set DPMS When in PC mode, you can activate Power Saving mode. 75 FUNCTION SETUP 1 2 3 DPMS feature is available for PC mode only. MENU 4 EXIT Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “FUNCTION” icon. Press Left and Right buttons to select “FUNCT...

Choosing the Your Languages When you start using your TV for the first time, you must select your language preference in order to display mainmenus and sub menues, etc. 76 FUNCTION SETUP HYUNDAI Plasma Display 1 2 3 MENU 4 EXIT Press Menu button. Menu items appear on the screen. Press Up and Down bu...

How to Set Image Adjust in PC Mode 77 FUNCTION SETUP 1 2 3 MENU 4 5 6 EXIT Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “FUNCTION” icon. Press Left and Right buttons to select “FUNCTION”. Press Up and Down buttons to move to “IMAGE ADJUST”. Press Left and ...

79 FUNCTION SETUP Using the Auto Change When watching your TV (pay channels) in Full Scart, CH information OSD is displayed on the screen in the same way asTV Mode. 1 2 3 - If you put AUTO CHANGE into ON while watching TV, the current mode is automatically switched to Full Scart to display signals t...

80 FUNCTION SETUP HYUNDAI Plasma Display Using the Auto Size This function is to automatically change the size of a picture by receiving WSS(Wide-Screen-Signal). 1 2 3 MENU 4 EXIT Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “FUNCTION” icon. Press Left and...

81 FUNCTION SETUP Display Mode According to Signal Source for Auto Size settings Aspect Ratio designated by user Auto Wide Panorama 4:3 Wide or Zoom Incoming Broadcast Format 4:3 Letter Box 16:9 4:3 Letter Box 16:9 4:3 Letter Box 16:9 4:3 16:9 Supported Aspect Ratio Mode Panorama Zoom Wide Panorama ...

HYUNDAI Plasma Display How to Set Clock ....................................................................... 83 How to Set On Time ................................................................... 84 How to Set Off Time ................................................................... 86 How ...

83 CLOCK SETUP How to Set Clock You can set the current time so that it may be displayed by pressing the “INFO” button. You must also set a clock ifyou wish to use the automatic on or off timers.Ex) To set to 6:30 PM, 1 2 3 MENU 4 5 6 7 8 Press Menu button. Menu items appear on the screen. Press Up ...

84 CLOCK SETUP HYUNDAI Plasma Display Press the Right button and then go to step 10 if you need to set on time. How to Set On Time This function allows you to automatically turn on your PDP at the preset time.Ex) To set to 7:20 AM, 11 10 12 13 14 15 16 17 Press Up and Down buttons to move to “ON TIM...

How to Set Off Time This function allows you to automatically turn off your PDP at the preset time.Ex) To set to 11:30 PM, 86 CLOCK SETUP HYUNDAI Plasma Display MENU 1 2 3 4 5 6 7 8 9 Press Menu button. Menu items appear on the screen. Press Up and Down buttons to move to “TIME” icon. Press Left and...

How to Set Sleep Time This function allows you to automatically turn off your PDP after a designated amount of time. How To Directly Start Sleep : Press button. Press sleep button, then the setting changes in order below. (Unit : Minute) OFF 30 60 90 120 240 88 CLOCK SETUP HYUNDAI Plasma Display 1 2...

HYUNDAI Plasma Display Glossary .................................................................................. 91 Troubleshooting ...................................................................... 93 Cleaning and Caring .............................................................. 95 Produc...

91 APPENDIX Glossary Component video Component video is sent through three cables: two color shade (chrominance) signalsand one brightness (luminance) signal. Component video achieves greater coloraccuracy than composite video or S VIDEO by splitting chrominance into two separateportions. Composite ...

93 APPENDIX Troubleshooting Installation Problems Picture Problems Symptom How can I install an antenna? TV screen is not clear after installing an indoors antenna. How can I view cable broadcasting? Symptom Neither picture nor sound comes up. Picture turns on slowly after power is on. Vertical and ...

95 APPENDIX Care and Cleaning Cabinet Cleaning Wipe a soft dry cloth. Do not use inflammables like Benzene or Thinner, or wet clothes. Do not scratch the panel of PDP with a fingernail or pointed object. Screen Cleaning Clean the screen with a soft cloth moistened in mild glassdetergent and dry with...

HYUNDAI Plasma Display 96 APPENDIX Product Specifications Display (PDP TV) Speaker (Optional) Pixel Width Height ( Excluding stand) Height ( Including stand) Depth Weight (With Package) Weight (Net Product) Power Colors Use Temperature Use Humidity TV HQP421SR HQP421HR HQP501HR MODEL Dimensions(WxDx...

97 APPENDIX Component Video Signal Format If PDP cannot reproduce proper video image, it's necessary to select a specific component video signal format among thebelow. - DVD : 480i / 480p / 576i / 576p / 720p / 1080i- DTV (Digital Broadcast) : 480p / 576p / 720p / 1080i- All signals are available fo...