Page 2 - Table of contents
2 Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefullybefore connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Table of contents .....................................
Page 6 - Important safeguards
6 Important safeguards Using the device at temperature below -10º may cause the breakage of the device. BEFORE USINGPLEASE HEAT UP THE PASSENGER COMPARTMENT TO THE RECOMMENDEDTEMPERATURE!Read carefully through this manual to familiarize yourself with this high-quality sound system.Disconnect the veh...
Page 7 - Multizone device description
7 Do not block the cooling fan e xit to ensure sufficient heating dissipation of this unit, failure to do thismay result in damage to this unit. Multizone device description Multizone definition means the ability of using the head device as the two synchronous signals source.For example by means of ...
Page 8 - Installation/ connection; Method 1; appropriate tabs and bend them out with a screwdriver.; Method 2; Step 1. Mounting sleeve
8 Installation/ connection Method 1 If the meter panel of your car has a two-din dash, and the fireproofingboard is capable of screw cap, you could choose this method.1. Insert mounting bracket (2) into the dashboard (1), select the appropriate tabs and bend them out with a screwdriver. 2. Screw a s...
Page 9 - Bend t he appropriate tabs to hold the sleeve firmly in place.; Step 2: Install bracket
9 Bend t he appropriate tabs to hold the sleeve firmly in place. Note: Locate 12 bend tags along the top, bottom and sides of the mounting sleeve, with the sleeve fully inserted into the dashboard opening, bend as many as of the tags outward as necessary so t hat t he sleeve isfirmly secured to the ...
Page 10 - Bracket; Step 3: Insert head unit into the sleeve
10 Bracket Step 3: Insert head unit into the sleeve Please fix brackets on both sides of the head unit and insert head unit into the mounting sleeve
Page 11 - Step 4: Install trim ring
11 Step 4: Install trim ring Press tags located in the inside of trim ring to the hole of trim ring, here to. Installations are completed.
Page 12 - Electrical connection
Page 13 - authorized car dealer before installing this unit.; Using the ISO Connector; shown in the wiring diagram.
13 Note: For your driving safety, please link your parking wire with low power level, and keep it controlled by manual brake switch. Wire should be high power level and the unit cannot play video disc. Caution: For some car models you may need to modify wiring of the supplied power cord. Contact you...
Page 15 - Unit controls; Monitor
15 Unit controls Monitor 1. POWER/MUTE button Press the button to turn the power on, press and hold for 2 seconds to turn the power off.When the power is on press it to cut down the volume output, press it again to resume volume.
Page 18 - Rear side; Press this button to eject the disc.
18 17. DVD/2-6CH button Short press to enter DVD mode.Long press to select 2-channel or 6-channel audio in DVD player and SD card reader. 18. OPEN button Short press to slide down/ up monitor. Rear side 19. EJECT button Press this button to eject the disc. 20. Disc slot21. Disc indicator22. SD card ...
Page 20 - buttons. Press it again to exit
20 18. DISC button - Select the previous disc to playback in DVDC source (Not supported by this unit). 19. VOL- button - Decrease volume.20. VOL+ but ton - Increase volume.21. STOP/BAND button - stop playback, select FM/AM band.22. button - Fast forward the current disc in DVD source. During menu se...
Page 22 - Changing the battery
22 Changing the battery 1. Press the catch and at the same time pull out the battery tray (pic. 1). 2. Insert the 1 x lithium battery, type CR2025 (3V) battery with the stamped (+) mark facing upward. Insert the battery tray into the remote control (pic. 2). Warning: Store the battery where children...
Page 23 - Monitor operations; Open/close TFT monitor
23 Monitor operations Open/close TFT monitor Short press OPEN button on the front panel or press the EJECT button of the remote control to open/close themonitor. TFT monitor auto open 1. Press the SYS SETUP button on the RC to enter the System setup menu.2. Touch the General setup item or press the ...
Page 24 - Playing source Video output format
24 Aspect ratio The aspect ratio alters according to the following while pressing the WIDE button on the front panel or the remotecontrol – FULL -> WIDE -> NORMAL -> OFF.FULL - The screen is extended horizontally as a whole to the aspect ratio of 16 to 9.The extension ratio is the same at a...
Page 25 - button on the RC or the; NAVI; mode, only BRIGHT is available for adjustment.; CVBS; buttons on the RC or the; When parking brake applied
25 2. Press the / button on the RC or the buttons on the monitor to select setting: PICTURE, COLOR, CONTRAST, BRIGHT, TINT.In NAVI mode, only BRIGHT is available for adjustment. In CVBS mode, PICTURE, COLOR, CONTRAST, BRIGHT and TINT are available for adjustment. 3. Press the / buttons on the RC or ...
Page 26 - Touch screen operations; Touch Operation On DVD Player
26 Touch screen operations Press the MENU/SRC button on the panel to get main menu, and youcan select a playing source or make setup on system and DVD playerby touch button. Touch Operation On DVD Player Positions of touch buttons are showed in the screen, they indicate theirfunctions on DVD player ...
Page 28 - General operations; Reset the unit; unit on it will resume the stored status that you set.; Volume control
28 General operations Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit.Press the RESET button on the front panel to restore the unit to the original factory settings. Power on/off Press POWER/MUTE button on the front panel or the POWER ...
Page 29 - Setting the audio system
29 Then press PLAY/PAUSE button or press the joystick uprightly to enter the selected source.OR press the corresponding button on the monitor: TUNER, SD, DVD. OR press the SRC button on the RC repeatedly to select the source: for the 1 st zone – on the main RC, for the 2 nd zone – on the RC 2. Setti...
Page 31 - Digital tuner operations; Mode selecting
31 Digital tuner operations Note: RDS service is available in M broadcasting only. RDS service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. To activatethis function enter the RDS SETUP menu (please refe...
Page 32 - Band selection; Automatic tuning
32 3. Current radio frequency4. Clock5. Indicator for strong signal receipt of local radio station LOC6. Indicator for receiving the stereo broadcast7. P1 – P6 – preset radio stations (they are touch buttons), press to recall preset station to playback8. PTY – program type9. Touch buttons10. MULTI-Z...
Page 33 - Programming tuner stations; buttons; Preset scan
33 Programming tuner stations You can store up to a total of 36 radio stations in the memory (24 FM, 12 AM), manually or automatically. To store a station: - Select a band (if needed)- Select a station by buttons - Hold a Preset button (1-6) that you want store the station for at least 2 seconds. To...
Page 35 - Selecting the PTY; button on the panel and hold for 2 seconds to turn ON or turn OFF; Saving the PTY
35 PTY (Program Type) function Selecting the PTY 1. In TUNER (RADIO) mode press the button on the panel and hold for 2 seconds to turn ON or turn OFF the PTY function. 2. In PTY mode press the / buttons on the RC or the / on the panel to select the desired program type: None, News, Speech, Music, Do...
Page 37 - zone – on the main RC, for the; zone – on the RC
37 SD/MMC card SD/MMC notes: 1. SD/ MMC card support, 2in1 (SD/ MMC) support. 2. FAT 12/ FAT 16/ FAT 32 is possible - FAT 12/16 (dir: 200 support, file:500 support), - FAT 32 (dir: 200 support, file:500 support). 3. Filename: 32 byte/ Dir name: 32byte.4. Tag (id3tag ver2.0) - Title/ Artist/ Album: 3...
Page 38 - User touch screen interface; the song name to playback it.; SD card operations; Stop playback
38 User touch screen interface 1. "1/40" – current track/total tracks. "00 : 00 : 27"-current track playback time. 2. "01:08" – clock.3. "Repeat" - single track repeat playback, it is a touch screen button."Random" - random playback track, it is a touch screen...
Page 39 - Playback previous/next chapter; Press; Switch the directory; Press AUDIO button on the remote control to alter audio.; Direct chapter/track selection
39 Playback previous/next chapter Press / button on the remote control or button on the monitor. Switch the directory Press DIR+/ DIR- button on the touch screen to switch to previous/next directory. Previous/next page Press PAGE+ / PAGE- button on the touch screen to switch to previous/next page. A...
Page 40 - Disc operations; Glossary; Title
40 Disc operations Glossary PBC (PlayBack Control) PlayBack Control is a menu recorded on the disc with SVCD or VCD2.0 format. And if the disc contains stillimages, it can playback high definition of still image. Title The title is the important part of DVD disc. The memory volume of the disc is rat...
Page 41 - Discs for playback
41 Discs for playback This unit can play disc types: CD/DVD/CDDA/CD-R/-RW/DVD±R/±RW.Compatible with formats: DVD-video/SVCD/VCD/HDCD/MP3/MP4/WMA/Picture-CD/JPEG.The following file types are supported:Audio files: MP3 (*.mp3) WMA (*.wma)Video files: MP4 (*.avi, DIVX3.11/4.0/5.0/6.0 and XVID) MPEG 2(*...
Page 42 - zone – on the main RC, for; Stop
42 Loading a disc 1. Turn the power on.2. Press OPEN button on the panel or OPEN/CLOSE on the RC to slide the monitor down, insert the disc into the slot. The monitor will be closed automatically. The unit will switch to DVD mode. 3. Press the OPEN button on the panel and then press the EJECT button...
Page 44 - Alter between 2 Ch and 6 Ch; Playing source Channel
44 Alter between 2 Ch and 6 Ch Each playing source has 2-channels of audio output. Some have 6-channels output. Playing source Channel TUNER 2-Channel DVD 2/6-Channel AUX IN 2-Channel CAMERA 2-Channel SD CARD 2/6-Channel NAVI 2-Channel To select 2- or 6-channel system press the DVD/2-6CH button on t...
Page 45 - Repeat playback; Press the REPT button on the RC once or more to repeat the playback:
45 Note: the information of the above table is valid only when the setup values of the speakers are low. To set up the speakers please refer to the menu: DVD SETUP => SPK CONFIG. Repeat playback Press the REPT button on the RC once or more to repeat the playback: For VCD/CD: REPEAT SINGLE => R...
Page 46 - the GOTO button repeatedly to select the Track or Disc search.; For DVD For MPEG4/VCD; cursor buttons on the panel or
46 GOTO function(for DVD/VCD discs) You can go to the desired track/ chapter or time point directly.1. During the disc playback press the GOTO button on the RC to enter the Search menu. For VCD discs press the GOTO button repeatedly to select the Track or Disc search. For DVD For MPEG4/VCD Search Tr...
Page 47 - Direct chapter/ track selection; For; DVD; Title menu
47 Direct chapter/ track selection During the CD/VCD playback enter the digits directly to go to the desired chapter/track. For example to enterthe 15 track press 1, then 5. Audio track and channel selection (for CD/VCD/DVD discs) For DVD playback: press the AUDIO button to change the audio language...
Page 48 - Changing the subtitle language (for DVD only)
48 PBC (Playback Control) function (for VCD only) If you insert a VCD with PBC, playback starts from the beginning of the 1st track automatically.1. Press MENU button on the RC to activate PBC menu on screen.2. If the menu consists a list of titles, you can select a desired one using the digit butto...
Page 49 - /6 Eng – the disc has 6 subtitle languages, the current one is the 2; The playback status will be shown as following:
49 On-screen display (OSD) 1. During playback press the DISP button on the RC to show the short playback information on display: DVD disc: T-Title (current/total)C – Chapter (current/total)00:41:28 – Current playback time of the current title 2/6 Eng – the disc has 6 subtitle languages, the current ...
Page 50 - The playback status will be shown as following (for 6 channels):; MP3/WMA files playback; To go to previous/ next file/ track touch the
50 The playback status will be shown as following (for 6 channels): Front: -current playing source for front zone is DVDRear: AUX IN - current playing source for rear zone is AUX INMPEG: a decoding methodPLII Music – Prologic II music is applied.The playback status will be shown as following (for 2 ...
Page 51 - MP3 overview
51 MP3 overview Notes on MP3: MP3 is short for MPEG Audio Layer 3 and refers to an audio compression technology standard.This product allows playback of MP3 files on DVD-R/-RW, DVD+R/+RW, CD-ROM, CD-R/-RW discs.The unit can read MP3 files written in the format compliant with ISO 9660. However it doe...
Page 52 - Notes on creating your own CD-R or CD-RW containing MP3 files:
52 Notes on creating your own CD-R or CD-RW containing MP3 files: To enjoy high quality sound, we recommend converting to MP3 files with a sampling frequency of 44.1 kHzand a fixed bit rate o f 128 kbps.DO NOT store more than 448 MP3 files per disc.For ISO 9660 - compliant format, the maximum allowa...
Page 53 - System setup menu; In SETUP menu press the
53 System setup menu Note: System setup menu is available in TUNER, DVD, AUX IN, TV (optional), SD CARD modes only. In any mode touch the left top corner of the screen to open the MAINMENU. Use the cursor buttons or press the SETUP button on the screen toopen the SETUP menu. In SETUP menu press the ...
Page 54 - Audio sound processing (ASP) configuration; Bass center frequency:
54 Audio sound processing (ASP) configuration 1. Enter the ASP CONFIG menu.2. Use the buttons on the panel or / buttons on the RC or touch the desired item on the screen to select the desired setting: Bass centerfreq, Treble center freq, SUB filter, SUB phase, Bass Q-factor. 3. Press the buttons on ...
Page 55 - General setup
55 General setup 1. Enter the GENERAL SETUP menu.2. Use the buttons on the panel or / buttons on the RC or touch the desired item on the screen to select the desired setting: Camera, TVsystem, Radio, Clock mode, Clock, Parking, TFT auto open, OSDmenu. 3. Press the buttons on the panel or / buttons o...
Page 56 - RDS setup
56 Parking: select the parking image mode: On (image is displayed when the car has been parked only), Off (image is displayed all the time). TFT auto open: set the monitor working mode when the unit is on and off: On (when the unit is off the monitor draws down into the unit automatically, when it’s...
Page 57 - switch to the station with strong signal).; Screen CAL
57 Region: set the Region function: ON (automatically switch to RDS station with same PI), OFF (automatically switch to the station with strong signal). Screen CAL Use the CAL screen when the touch screen is not sensitive or valid. Calibrate it following the clew displayed onthe screen after enterin...
Page 58 - DVD setup menu
58 DVD setup menu In any mode touch the left top corner of the screen to display the MAINMENU. Use the cursor buttons or touch the SETUP button on the screen toopen the SETUP menu. In SETUP menu press the buttons on the panel or / buttons on the RC or touch the desired item on the screen to select t...
Page 60 - Audio
60 4. Press the buttons on the panel or / buttons on the RC or touch the desired button on the screen to select the desired value. 5. Press PLAY/PAUSE / ENTER / SCAN button to confirm. TV shape: select the width/height of the image: 16:9 (wide screen), 4:3 (normal view). This function is not availab...
Page 61 - SPK configuration
61 DRC: set the DRC (dynamic range control) for better playback for low volume playback: On (use bass to play the more dynamical audio), Off (normal playback). Center delay: the time difference between center and front speakers. The time delay makes audio signal more accurate. Select the time delay:...
Page 62 - Surround FX
62 Stereo: set up the rear speakers: Large (suitable for speakers with good bass output), Small (for speakers with bad bass output), None (rear speaker is not employed). Subwoofer: set up the subwoofer: Large (subwoofer is employed), None (subwoofer is not employed). Center: set up the center speake...
Page 64 - Rating
64 Rating This unit has the built in parental lock feature to prevent authorized person to view restricted disc content. 1. Enter the RATING menu2. Use the buttons on the panel or / buttons on the RC or touch the desired item on the screen to select the setting: Password, Rating,Load factory. 3. Pre...
Page 65 - Other playback modes; AUX IN mode select
65 Other playback modes AUX-IN mode This mode is for using the unit as an AV signal amplifier or connectingthe rear-view camera.Connect the peripheral device (DVD player, video-camera, rear-viewcamera etc) to the unit via RCA output and AUX in. The unit will beswitched into the AUX mode and will sho...
Page 66 - Rear view video camera; button on the RC1 to select the General setup menu, press; Navigation function
66 Rear view video camera This playing source is available only if the rear view video camera is installed properly. Reverse drivingactivates CAMERA playing mode. Connect the video input cable "CAMERA" with the camera output cable forthis function.1. Press the SYS SETUP button on the RC to e...
Page 68 - Handling and cleaning discs; Cleaning; Cleaning the cabinet
68 Handling and cleaning discs Dirty, scratched or warped discs may cause skip ping or noise.Handle the disc only by the edges. To keep clean do not touch its surface.Discs should be stored in their cases after use to avoid scratches.Do not expose discs to direct sunlight, high humidity, high temper...
Page 69 - Troubleshooting guide; Symptom
69 Troubleshooting guide Symptom Cause Solution No power. The car ignition is not on. The fuse is blown. If the power supply is properly connected to the car accessory switch the ignition button to “ACC”. Replace the fuse. Disc cannot be loaded. Presence of disc inside the player. Remove the disc in...
Page 70 - Specification; General; Maximum power output:; TFT display; Preset memory stations:
70 Specification General Power supply: 12 V DC Current consumption: max. 10 A Maximum power output: 50 W x 5 channels Compatible formats: DVD/SVCD/VCD/HDCD/MP3/MP4/WMA/CDDA/Picture-CD/JPEG/CD-R/-RW/DVD±R/±RW playback Dimensions (L x W x H) / weight: 185 x 178 x 100 mm / 2.98 kg Working temperature r...
Page 71 - AM section; Audio specification
71 Specifications are subject to change without notice. Mass and dimension are approximate. AM section Frequency range: 522 kHz - 1620 kHz Preset memory stations: 12 Audio specification Output: 2Vrms Frequency response: 20 Hz - 20 KHz (+ 3 dB) S/N ratio(A-vtd): 70 dB Line out Output: 2 V
Page 79 - TOYOTA NISSAN
Page 83 - ISO
83 : , . , . . : . . ISO 1. ISO, , . 2. ISO , . 3. , , .
Page 86 - RESET
Page 99 - PIC
99 2. / , : PICTURE ( ), COLOR ( ), CONTRAST ( ), BRIGHT ( ), TINT ( ). NAVI . CVBS : PICTURE ( ), COLOR ( ), CONTRAST ), BRIGHT ( ), TINT ( ). 3. / , . 4. PIC WIDE/PIC , . PRK SW ( . ) , TFT- . , « ( )» – . « ( )», , (« , !»). , ,. OPEN
Page 100 - SETUP
100 . , RESET, . , (MAIN MENU), TFT- . , , (TUNER, DVD, SD CARD, AUX IN, NAVI, CAMERA ( )), DVD- ( SETUP ). DVD DVD : – (MAIN MENU) B – ( DISP ) C – ( , . , CAMERA , ). D –
Page 101 - SD
Page 102 - POWER
102 RESET. : , , . / POWER/MUTE POWER , . 2 POWER/MUTE , . : , , . VOL + , . VOL - , . : .
Page 119 - RE
119 2- 6- DVD/2-6CH . : . . . 2- 2- 6- Dolby Pro-Logic. 2- 6- Dolby Pro-Logic. 6- 6- : . DVD SETUP => SPK CONFIGURATION. RE , : VCD/CD: REPEAT SINGLE ( ) => REPEAT OFF ( ) DVD: REPEAT TITLE ( ) => REPEAT CHAPTER ( ) => REPEAT OFF ( ). MP3: REPEAT SINGLE ( ) => REPEAT FOLDER ( ) => ...
Page 121 - AUDIO
121 DVD MPEG4/VCD Search Track search Disc searchTime --:--:-- Time --:--:-- OR Time --:--:--Title/Chapter ---/--- Track ---/--- Track ---/--- 2. / : Time ), Title/Chapter ( ), Track ( ). 3. : , , ( ). , 18 20 00 , : 1 => 8 => 2 => 0 => 0 => 0. PLAY/PAUSE, . : . , 20 8, : 2 => 0 =&...
Page 122 - MENU; VCD
122 CD/VCD: AUDIO , : Left channel ( ) => Right channel ( ) => Stereo ( ). DVD 1. MENU , . 2. / / / , . 3. PLAY/PAUSE , . 1. TITLE , . 2. / . . 3. PLAY/PAUSE , . PBC ( ) ( VCD ) VCD PBC, 1- . 1. MENU , . 2. , / .
Page 123 - ZOOM; SUBTITLE; ANGLE
123 3. , PLAY/ PAUSE , . 4. STOP, VCD. 5. MENU, . ( DVD/VCD ) ZOOM . : DVD: 1 => 2 => 3 => 4 => . VCD: 1 => 2 => 3 => . ( DVD ) . SUBTITLE . , . ( DVD ) DVD- , ANGLE . , .
Page 124 - DISP; – AUX IN
124 1. DISP , : DVD : T - ( ) C – ( ) 00:41:28 – 2/6 Eng – 6 , – 2 - . : Front: DVD - ( ) - DVD Reart: AUX IN - ( ) – AUX IN Dolby digital – ByPass – ProLogic . VCD : VCD2/0 – Title: - /
Page 129 - ASP; Bass
129 ASP 1. ASP . 2. / , : Bass . ., Treble . ., Sub. w , Sub. W , Bass Q-factor. 3. / , . 4. / , . 5. PLAY/PAUSE, . Bass : : 60 , 80 , 100 , 130 , 150 , 200 . Treble : : 10 , 12.5 , 15 , 17 . Sub.w : : 80 , 120 , 160 . Sub.w : : 0D, 180D. Bass Q-factor: : 1.0, 1.25, 1.5, 2.0.
Page 132 - RDS
132 RDS 1. RDS . 2. / , : RDS, CT, . 3. / , . 4. / , . 5. PLAY/PAUSE, . RDS: / RDS . CT: / RDS. : / : . ( I, ), . ( ). , . , , .
Page 138 - ProLogic II; ProLogic
138 : : ( 16 ), ( 13 ), ( ). : : ( 25, 30 ), ( ). : : ( 16 ), ( 13 ), ( ). ProLogic II Dolby ProLogic II - Dolby ProLogic, , . ProLogic ( : , , , ). Dolby ProLogic - . DPL , . . ProLogic - , . . 1. PROLOGIC II. 2. / , : Surround, , , .
Page 142 - AV; AUX IN; SRC
142 AUX IN AV . AUX (DVD , , . .). , – . , . AUX IN MENU/SRC , . ( ) AUX IN. PLAY/PAUSE . SRC , AUX IN. , (CAMERA). , . 1. , ., – SYS SETUP 1, . 2. 1 .
Page 147 - FM
147 : 12 : 10 : 50 5 : DVD/SVCD/VCD/HDCD/MP3/MP4/WMA/CDDA/Picture-CD/JPEG/CD-R/ -RW/DVD±R/±RW ( )/ : 185 178 100 / 2,98 : -10º - +60º ESP 40 CD, 120 3, 300 WMA : 6,5” : 400 234 dpi : 16:9 : 300:1 : 350 2 : : 110°, : 120° FM : 65.0 – 74.0 / 87.5 – 108.0 MHz : 15
Page 148 - AM; RMS
148 24 AM : 522-1620 12 : 2 RMS : 20 – 20 (+/-3 ) (A-vtd): 70 3 . .
