Husqvarna Auto Mower - Manual

English- 6 SYMBOLS Symbols in the Operator’s Manual These symbols can be found in the Operator’s Manual. Study them carefully so you understand their signifi-cance. • Inspection and/or maintenance should be carried out with the main switch set to ”OFF”. • Always wear protective gloves when working w...

English- 7 SAFETY INSTRUCTIONS Safety Instructions Use • Read through the Operator’s Manual carefully and understand the content before using the Auto Mower. • Check that there are no stones, branches, tools, toys or other objects on the lawn that can damage the blades and cause the mower to stop. •...

English- 8 SAFETY INSTRUCTIONS Transport The original packaging should be used when transport-ing the Auto Mower over long distances. To safely move from or within the working area: 1. Press the STOP button to stop the mower. If the stop protection, (see page 36) used as to prevent theft, has been a...

English- 9 PRESENTATION Presentation Congratulations on your choice of an exceptionally high quality product. To get the best from your Auto Mower requires knowl-edge of its function. This chapter contains information you should be aware of when planning the installation. Installation of the Husqvar...

English- 10 PRESENTATION Function Auto Mower Working method The Auto Mower automatically mows the lawn. It con-tinuously combines mowing and charging. When the Auto Mower works on a lawn, it simulta-neously stores information about how the garden is shaped. The charging station sends out a signal th...

English- 12 PRESENTATION Movement pattern The mower’s movement pattern is irregular and is determined by the Auto Mower itself. A movement pat-tern is never repeated. This mowing system means the lawn is mown equally without any mowing lines. If the Auto Mower enters an area where it senses the gras...

English- 13 INSTALLATION Installation This chapter describes how you install the Auto Mower. Before starting the installation read the previous chap-ter ”Presentation” on page 9 to page 12. The installation should be carried out according to the following steps: A. Preparations. B. Planning the inst...

English- 14 INSTALLATION Auto Mower, what is what? The numbers in the picture corresponds to: 1. Charging strip 2. Cutting height adjustment cover 3. Front wheel 4. Drive wheel 5. Body 6. Stop button 7. Keypad 8. Display 9. Main switch 10. Handle 11. Chassis box with electronics, battery and motors ...

English- 15 INSTALLATION B. Planning the installation Charging station First and foremost the charging station should be posi-tioned: • Centrally in the main area, along the outer edge and with a large free area in front of the station. • In the shadow. The battery is spared if it charged in the low...

English- 18 INSTALLATION Boundary wire For a successful installation the placement of the boundary wire should be planned carefully. Planning is simplified if you make a sketch of the working area, including all obstacles. Draw how the boundary wire should be routed on the sketch. The boundary wire ...

English- 19 INSTALLATION Remember the following with regard to the working area boundaries: • If a high obstacle, for example a wall or fence, bor-ders the working area, the boundary wire should be laid 35 cm from the obstacle. This will prevent the Auto Mower from colliding with the obstacle and re...

English- 21 INSTALLATION • In order for the loop system to work well, the wires in passages where the Auto Mower is to run through must not lie too close together. A passage should be at least 2 metres wide so the Auto Mower can find it and make its way through it. The minimum spacing between the wi...

English- 22 INSTALLATION D. Charging the battery The Auto Mower is supplied with an uncharged battery. As soon as the charging station is connected, it is pos-sible to charge the mower. 1. Place the Auto Mower in the charging station to charge battery while you are laying the boundary wire. Charging...

English- 23 INSTALLATION F. Connecting the boundary wire Connect the boundary wire to the charging station: 1. Lift up the cover on the charging station: • Grip under the edge of the cover with both hands and pull straight out towards the sides. • Now lift the cover straight up. 2. Slide in the ends...

English- 25 INSTALLATION 7. Refit the cover on the charging station. Ensure the three guides on the charging station enter the right holes in the cover. G. Checking the installation Check the loop signal by looking to see what indication the green LED on the charging station is giving. • Lit = the s...

English- 26 CONTROL PANEL Control panel On the top of the Auto Mower there is a control panel under a cover. Open the cover by pressing the STOP button. Close the cover by sliding it forward until a click is heard. The click is heard when the STOP button returns to the operating mode. All forms of c...

English- 27 CONTROL PANEL Shortcuts 1. Home: • Sends the mower to the charging station. Where it stays until the button is pressed again. The house icon is lit on the right-hand side of the display when the button is pressed. • Move the cursor in the menu structure back to the main page. 2. Operatin...

English- 28 CONTROL PANEL Select 6. Clr: • Press to go back one step in the menu structure. 7. YES • Press to confirm an entry or selection. • Press to start the mower if more than 10 sec- onds has elapsed since you last pressed a but-ton and you want to close the control panel cover. 8. Arrows • Pr...

English- 29 MENU FUNCTIONS Menu functions Main menu The main menu consists of four options: 1. Commands 2. Timer 3. Installation 4. Settings The numbers refer to the headings on the coming pages. There are a number of submenus under each option. You can access all the functions to set the Auto Mower...

English- 30 MENU FUNCTIONS 1. Commands Via this selection in the main menu you access the main Auto Mower functions. Select among the sub-menus: • Charge then AUTO (1-1) in order for the Auto Mower to drive immediately to the charging station, charge the battery and then return to the automatic oper...

English- 37 MENU FUNCTIONS Sounds (4-2) A number of audio messages are used to indicate what the Auto Mower is currently doing. The sound levels are graduated from level 4 (highest) to OFF (com-pletely quiet). • Default (4-2-1) where the sound level is OFF on all functions except blade start-up and ...

English- 38 MENU FUNCTIONS User info level (4-3) Selecting the user info level involves determining how much information should be shown on the display when the main switch is set in the ON position. The basic user info level means less information on the dis-play than in the advanced user info leve...

English- 40 USE Use Charging a discharged battery When the Auto Mower is new or has been stored for a long period the battery will not be charged and needs to be charged before starting. Charging takes between 1 1/2 and 2 1/2 hours. 1. Place the Auto Mower in the charging station. Make sure the char...

English- 41 USE Using the timer Mow the lawn as much as you like when you like. Use the timer function (see ”2. Timer” on page 30) to avoid a down trodden lawn and to get the maximum life from your Auto Mower. For example, the quality of your lawn will improve if it is mown every other day instead o...

English- 42 USE Adjusting the cutting height The cutting height is calculated as the distance from the ground in centimetres. The cutting height can be varied using 10 different positions from MIN (2 cm) to MAX (6 cm). If the grass is long it is appropriate to let Auto Mower start mowing at the MAX ...

English- 43 MAINTENANCE Maintenance Check and clean the Auto Mower regularly and replace worn parts if necessary to improved operating reliabil-ity and to give a longer service life. During the initial period of Auto Mower use the blade disc, skid plate and blades should be checked once a week. If t...

English- 44 MAINTENANCE Cleaning Never use a high-pressure washer or even running water to clean the Auto Mower. We recommended a spray bottle with water. Underframe and blade disc 1. Set the main switch to the OFF position. 2. Wear protective gloves. 3. Lift the Auto Mower onto its side. 4. Clean t...

English- 45 MAINTENANCE Replacing the blade units There are three blade units on the blade disc. Each unit consists of a screw, a blade and a lock washer. Always replace all three blade units at the same time, to obtain a balanced mowing system. 1. Set the main switch to the OFF position. 2. Wear pr...

English- 46 TROUBLE SHOOTING Trouble shooting Fault messages A number of fault messages are listed below that can be shown on the display. If another message than those listed is shown, contact your dealer. Fault message Cause Action Left wheel motor blocked Grass or other object may have become wra...

English- 48 TROUBLE SHOOTING Trouble Shooting Guide If your Auto Mower does not work correctly, follow the trouble shooting guide below. If the fault persists; con-tact your dealer. Symptom Cause Action Uneven cutting result Auto Mower works too few hours per day. Increase the mowing time, see ”2. T...

English- 49 TECHNICAL DATA Technical Data Data Auto Mower Dimensions Length 71 cm Width 56 cm Height 30 cm Weight 8.6 kg Electrical system Battery NiMH special battery 18V / 2,2 Ah (40 Wh) Transformer 230 V / 24 V Noise emissions Measured noise level 63 dB(A) Guaranteed noise level 70 dB(A) Mowing M...

English- 50 EU DECLARATION OF CONFORMITY EU declaration of conformity EU Declaration of Conformity (only applies to Europe) We, Husqvarna AB , SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole respon- sibility that the automatic lawn mower Husqvarna Auto Mower from 2003’s serial n...