Hunter 90438 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 - TABLE OF CONTENTS
2 TABLE OF CONTENTS Introduction ............................................................. 3 Safety and Warnings ................................................ 3 Grounding ............................................................... 5 Fused Plug ................................................
Page 5 - Figure 1; Figure 2; GROUNDING
5 Figure 1 This appliance is for household use only and may be plugged into any 120-volt AC electrical outlet (ordinary household current). DO NOT use any other type of outlet. This unit is suitable for grounded receptacle use only. The power cord has a grounded plug as shown in Figure 1, and must b...
Page 6 - Figure 3; FUSED PLUG; Figure 4
6 Figure 3 This plug is a safety feature. It contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged. To reduce the risk of fire, electric shock and personal injury, DO NOT remove, replace, repair or tamper with the originally supplied plug. If t...
Page 7 - BASE ASSEMBLY; Figure 7; UNPACKING
7 BASE ASSEMBLY Figure 7 Figure 6 Figure 8 1. Remove and height adjustment knob from telescoping pole by turning it counter clockwise. Also remove the cord clamp. Slide the base trim ring onto the pole. Reinstall the height adjustment knob and cord clamp. Figure 6. 2. Remove the L-shaped screw from ...
Page 8 - ATTACHING ASSEMBLY TO POLE
8 ATTACHING ASSEMBLY TO POLE Figure 10 Clip Button 1. Press the clip buttons in completely while sliding the pole from the motor housing assembly into the inner pole until the clip buttons appear through the hole in the inner pole. Figure 10.
Page 9 - GRILL ASSEMBLY
9 Figure 12 Figure 11 Figure 13 Figure 14 Figure 15 GRILL ASSEMBLY Grill Lines Grill Mounting Screw Top Tabs 14a Motor Notch Fan Blade Note: The trim ring may be attached to the front and rear grills for shipping purposes. If so, remove the trim ring by loosening the trim ring screw. 1. Remove the f...
Page 11 - OPERATION
11 Figure 20 High Medium Low Off Figure 21 OPERATION To turn the fan on and off or to control the speed, turn the speed knob on the top of the motor housing to the proper setting. Figure 20. Off / Speed Selection Oscillation To allow the fan to oscillate, push the knob beside the fan speed control d...
Page 12 - MAINTENANCE
12 MAINTENANCE This fan is permanently lubricated and will not require additional lubrication (oil) for the life of the fan. This fan requires little maintenance and contains no user serviceable parts. DO NOT try to fix it yourself. Contact qualified service personnel if servicing is needed. Before ...
Page 13 - arranty; WARRANTY
13 If you have any additional questions or problems with your Hunter Portable Fan, please call: USA: 1-888-830-1326 Canada: 1-866-268-1936 Hours of operation are from 7:00 am to 7:00 pm Monday - Friday and 8:00 am to 5:00 pm on Saturday, Central Time. You may also contact us on the Internet at www.H...