HULK POWER HI07V080Y1 - User Manual
HULK POWER HI07V080Y1 Compressor – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – HULK Power; Model Specifications
- Page 3 – Stationary Air Compressor; Inspection; Description; Get to know your compressor
- Page 4 – Safety Information
- Page 5 – CALIFORNIA PROPOSITION 65; Basic Guidelines; Breathable Air
- Page 6 – Installation; Area; Electrical Safety
- Page 7 – Operation; Safety Rules; Air Tool Cautions
- Page 8 – Getting Started; Power Requirements; all; Assembly; Before operating your air compressor:
- Page 9 – General Overview; Installation and Location; Air Intake
- Page 10 – Starting; Pressure Switch; Maintenance; Service
- Page 11 – Daily; Monthly; Troubleshooting; Belt Adjustment; Slow Pumping Or Insufficient Pressure; Await
- Page 12 – Overheating; Storage
- Page 13 – Troubleshooting Chart; Trouble
- Page 14 – Hulk Warranty Statement; SMART OILTM
EMAX Compressor
1000 Cass Dr., Clayton, OH 45315 USA
866.294.4153
Fax: (937) 540-1157
Stationary Air Compressor
Operating Instructions
EMAX designs and manufactures products for safe
operation. However, operators and maintenance per-
sons are responsible for maintaining safety. All safety
precautions are included to provide a guideline for
minimizing the possibility of accidents and property
damage while equipment is in operation.
Keep these instructions for reference.
Model # :
UPC:
HI05V08Y1/HS05V08Y1 man
v.190811
HI05V08Y1 / HS05V08Y1
815002014265 / 815002014272
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 HULK Power Model Specifications ● Model: HI05V08Y1 HS05V08Y1 (with noise suppression) ● Motor: 230 V (+ or - 10%) ~ 60 Hz, Single Phase ● No-load motor speed: 1750 rpm ● Power: 5 HP ● 2 stage, 3 cylinder, cast-iron piston pump ● Max. pressure: 155 psi ● No-load pump speed: 790 rpm ● Pump oil capac...
3 HI05V08Y1/HS05V08Y1 man v.190811 Stationary Air Compressor Inspection ● Inspect compressor prior to any use. ● Check for external damage that might have occurred during transit. Check for possible damage from transit and test the pulley by turning it freely with your hands. Be careful of moving pa...
4 HULK Power 4 of excessive pressure build up. The safety valve is preset at factory. Do not attempt to make any adjustments to the safety valve. Periodically pull the ring on the safety valve end to check that it is working properly. 5. RESERVOIR AIR PRESSURE GAUGE - Indicates pressure of compresse...
