Page 3 - Warning; WARNING
02/06 ID# M661144 3 10-3/4" High 4" Wide PMS 021 for Warning Owner must ensure that all players know and follow these rules for safe operation of the system. WARNING • DO NOT HANG on the rim or any part of the system including backboard, support braces or net. • During play, especially when ...
Page 4 - MOVING SYSTEM; SAFETY INSTRUCTIONS; sections to separate during play and/or transport of the system.
4 ID# M661144 02/06 EXACTA-HEIGHT : ADJUSTMENT PORTABLE 511679 Size = 4" x 5.5" Corner Radius = 3/8" Die Cut Label 3.25 Mil Vinyl All Temp. Permanent Adhesive 1 Mil. Polypropolyne Overlaminate Illustrator 8.0 = EPS Backing + 1/16 Circumference Rolls of 500 2 2 1 3 TO ADJUST BACKBOARD: 1....
Page 5 - NOTICE TO ASSEMBLERS; It is NOT acceptable to devise a makeshift weight system.
02/06 ID# M661144 5 IMPORTANT! Remove all contents from boxes. Be sure to check inside pole sections; hardware and additional parts are packed inside. NOTICE TO ASSEMBLERS Adult Assembly Required. Dispose of ALL packaging materials promptly. ALL basketball systems, including those used for DISPLAYS,...
Page 7 - PARTS LIST - See Hardware Identifier; NOTE; Hardware kit is designed for more than one
02/06 ID# M661144 7 Item Qty. Part No. Description 1 1 266000 Base 2 2 908184 Strut, Pole to Base 3 1 804833 Exacta Height Assembly 4 1 FR908006 Top Pole Section 5 1 FR918107 Middle Pole Section 6 1 FR908179 Bottom Pole Section 7 2 108183 Wheel Bracket 8 2 266200 Wheel, 4 Inch 9 2 108182 Rod, Axle 1...
Page 11 - TOOLS REQUIRED FOR THIS SECTION; SECTION A: ASSEMBLE THE BASE; and Sockets
02/06 ID# M661144 11 TOOLS REQUIRED FOR THIS SECTION SECTION A: ASSEMBLE THE BASE And/Or: This is what your system will look like when you’ve finishedthis section. 1/2” 9/16” Wrenches:(1) 1/2” and (1) 9/16” (2) Socket Wrenches and Sockets Extension Phillips-Head Screwdriver
Page 12 - Check the following pre-assembled handle areas for tightness:
12 ID# M661144 02/06 Check the following pre-assembled handle areas for tightness: Screw P/N 204803, Nut P/N 203100, Carriage Bolts P/N 203103. Carriage Bolt P/N 203103 Nut P/N 203100 Nut P/N 203100 Handle, RightP/N 204856 Handle, LeftP/N 204855 Screw P/N 204803 Carriage Bolt P/N 203103 Height Adjus...
Page 13 - • Support Pushnut/Axle
02/06 ID# M661144 13 2. Complete wheel assembly as shown in Figure A. Secure wheel bracket (7), wheel (8), axle (9), and pushnuts (13) to the tank (1) with a single bolt (18) and washer (51). Repeat procedure for opposite wheel. 7 8 9 13 13 18 1 Fig. A Do not install bothbolts into the wheelassembly...
Page 14 - WOOD SCRAP; TROUGH; Identify pole sections.
14 ID# M661144 02/06 6 5 4 4. WOOD SCRAP (NOT SUPPLIED) 5 4 While maintaining alignment, bounce middle pole section (5) into top section (4)using a wood scrap as shown until the top pole no longer moves toward the poleidentification sticker on the middle pole. Identification Sticker TROUGH TROUGH TR...
Page 17 - DO NOT TIGHTEN
02/06 ID# M661144 17 7 18 8. Rotate non-secured ends of tank struts (2) outward to mounting holes in tank asshown. Secure ends of tank struts (2) to wheel bracket (7), as shown. Repeat foropposite side. 2 2 48 47 9. Secure cover (28) to tank struts (2) usingbolts (47) and nuts (48) as shown. 28 TWO ...
Page 20 - SECTION B: ATTACH THE BACKBOARD; Screwdriver; Extension; Sawhorse; Upper Elevator tube
20 ID# M661144 02/06 TOOLS REQUIRED FOR THIS SECTION SECTION B: ATTACH THE BACKBOARD Phillips-Head Screwdriver This is what your system will look like whenyou’ve finished this section. Wrenches: (2) 1/2", (2) 9/16”, and (2) 3/4” (2) Socket Wrenchesand Sockets And/Or 1/2” 9/16” Extension 3/4” Saw...
Page 22 - COMPLETED ASSEMBLY
22 ID# M661144 02/06 Support pole on sawhorse. Attach triangle plates(37) and elevator tubes (35 & 32) to top pole (4)using bolts (40 & 29) and nuts (31). Install pole cap (38). 2. 35 31 29 35 31 31 30 30 40 37 37 32 32 4 USE CAUTION; ELEVATORASSEMBLY IS HEAVY. TWO PEOPLE REQUIRED FORTHIS PR...
Page 23 - make sure
02/06 ID# M661144 23 3. Install handle assembly to lower elevator tubes (32) using bolt (29), spacers (36),and nut (31) as shown. 29 35 31 35 36 36 4 Before going on tonext step, make sure adjustable systemassembly is set to the10’ (3.05 m) setting. NOTE:
Page 26 - Install Slam Jam Rim to Backboard
26 ID# M661144 02/06 8. 56 58 59 54 55 Install Slam Jam Rim to Backboard 34 57 55 59 58 A B C D E A Fit rim (34) securely into bracket (54) as shown. Allow T-bolt (55) to slip through centerhole in rim (34). B Install reinforcement bracket (56) onto T-bolt (55) as shown. C Install spring (57) onto T...
Page 28 - SECTION C: APPLY HEIGHT AND MOVING LABEL & HEIGHT ADJUSTMENT; DO NOT ALLOW; Peel protective
28 ID# M661144 02/06 1. Apply height adjustment and moving label (46) to front of pole as shown. 2. A. While holding handle, remove pin (24). B. Move elevator up or down to desired height. C. Replace pin (24) full length to lock system at desired height. SECTION C: APPLY HEIGHT AND MOVING LABEL &...
Page 30 - PARTS LIST; HARDWARE IDENTIFIER
30 ID# M661144 02/06 Item Qty. Part No. Description 1 2 266102 Lock Nut, Nylon Insert 2 6 206151 Washer 1/4 ID 1 O.D. 3 6 202871 Screw, Hex, 1/4 x 3/4 Slotted 4 1 205225 Board Pad, Right (46-50” Board”) 204318 Board Pad, Right (42” Board”) Item Qty. Part No. Description 5 1 206292 Board Pad, Middle ...
Page 32 - Gebrauchsanleitung für tragbare; Manual del Propietario del Sistema; Système portable - Manuel de; importantes sur votre modèle.; FRANÇAIS
32 ID# M661144 02/06 Inscrivez ici le numéro de modèle qui apparaît sur la boîte: Die Modellnummer vom Verpackungskarton hier eintragen: Escriba aquí el número de modelo que viene en la caja: Gebrauchsanleitung für tragbare Systeme Kundendienstzentrale • N53 W24700 South Corporate Circle • Sussex, W...
Page 34 - VORBEREITENDE MASSNAHMEN
34 ID# M661144 02/06 AVANT DE COMMENCER! VORBEREITENDE MASSNAHMEN ¡ANTES DE COMENZAR! Apprenez à connaître les composants de base de votre système de basket-ball..... Machen Sie sich mit den wichtigsten Teilen Ihres Basketballsystems vertraut… Conozca las piezas básicas de su sistema de baloncesto… ...
Page 35 - VE
02/06 ID# M661144 35 1 0 - 3 /4 " H ig h 4 " W id e P M S 0 2 1 f o r W a r n in g L e p ro p ri é ta ir e d o it s 'a s s u re r q u e t o u s l e s j o u e u rs c o n n a is s e n t e t s u iv e n t c e s r è g le s d 'u ti li s a ti o n s û re d u s y s tè m e . AV ER TIS SE ME NT • N E V...
Page 36 - DÉPLACEMENT DU SYSTÈME; TRANSPORTSYSTEM; MOVIMIENTO DEL SISTEMA; CONSIGNES DE SÉCURITÉ; SICHERHEITSHINWEISE; INSTRUCCIONES DE SEGURIDAD
36 ID# M661144 02/06 EXACTA-HEIGHT : ADJUSTMENT PORTABLE FR2511679 Eng: Dan1st Used:04/05 Size = 4" x 5.5" Corner Radius = 3/8" Die Cut Label 3.25 Mil Vinyl All Temp. Permanent Adhesive 1 Mil. Polypropolyne Overlaminate Illustrator 8.0 = EPS Backing + 1/16 Circumference Rolls of 500 2 2 ...
Page 37 - Gehen Sie NICHT zum Laden zurück!; ¡NO regrese a la tienda!
02/06 ID# M661144 37 Des questions ou des pièces manquantes ? Appelez le numéro du service clientèle (NUMÉRO GRATUIT) qui figure en première page! STOP! STOP! Des questions ou des pièces manquantes ? Appelez le numéro du service clientèle (NUMÉRO GRATUIT) qui figure en première page! STOP! NE RETOUR...
Page 39 - LISTE DES PIÈCES; REMARQUE; Le kit de visserie est conçu pour plus d’un
02/06 ID# M661144 39 LISTE DES PIÈCES FRANÇAIS Légende Qté No. de réf. Description 1 1 266000 Socle 2 2 908184 Contrefiche, poteau/socle 3 1 804833 Ensemble hauteur Exacta 4 1 FR908006 Section de poteau supérieure 5 1 FR918107 Section de poteau centrale 6 1 FR908179 Section de poteau inférieure 7 2 ...
Page 40 - DEUTSCH; TEILELISTE; Die beiliegenden Befestigungsteile sind für
40 ID# M661144 02/06 DEUTSCH TEILELISTE Nr. Anz. Teilenummer Beschreibung 1 1 266000 Sockel 2 2 908184 Verstrebung, Stange zu Sockel 3 1 804833 Exacta-Höheneinstellkomponenten 4 1 FR908006 Oberes Stangenteil 5 1 FR918107 Mittleres Stangenteil 6 1 FR908179 Unteres Stangenteil 7 2 108183 Radhalterung ...
Page 41 - ESPAÑOL; LISTA DE PIEZAS; El juego de herraje está diseñado para más
02/06 ID# M661144 41 ESPAÑOL LISTA DE PIEZAS NOTA: El juego de herraje está diseñado para más de un estilo de sistemas de baloncesto. No se usará todo el herraje. Artículo Cant. Pieza N.º Descripción 1 1 266000 Base 2 2 908184 Puntal, poste a base 3 1 804833 Conjunto Exacta Height 4 1 FR908006 Secci...
Page 42 - IDENTIFICATION DES PIÈCES (ENTRETOISES EN ACIER)
42 ID# M661144 02/06 IDENTIFICATION DES PIÈCES (BOULONS & VIS) BEFESTIGUNGSTEILESCHLÜSSEL (BOLZEN UND SCHRAUBEN) IDENTIFICADOR DE HERRAJE (PERNOS Y TORNILLOS) * IL EST POSSIBLE QUE VOUS AYEZ D'AUTRES PIÈCES AVEC CE MODÈLE. * DIESEM MODELL KÖNNEN ZUSÄTZLICHE TEILE BEIGEPACKT SEIN. * PUEDE HABER P...
Page 44 - SECTION A : MONTAGE DU SOCLE; Clés à douilles et douilles; un tournevis cruciforme
44 ID# M661144 02/06 OUTILS REQUIS POUR CETTE SECTION FÜR DIESEN BAUABSCHNITT BENÖTIGTES WERKZEUG HERRAMIENTAS REQUERIDAS PARA ESTA SECCIÓN SECTION A : MONTAGE DU SOCLE BAUABSCHNITT A: ZUSAMMENBAU DES SOCKELS SECCIÓN A: MONTAJE DE LA BASE Voici à quoi ressemblera votre système lorsquevous en aurez f...
Page 55 - OUTILS REQUIS POUR CETTE SECTION
02/06 ID# M661144 55 SECTION B : ATTACHEZ LE PANNEAU BAUABSCHNITT B: ANBRINGEN DER KORBWAND SECCIÓN B: CONECTE EL RESPALDO (2) clés 1/2", (2) clés 9/16" ET (2) clés 3/4" (2) 1/2", (2) 9/16" UND (2) 3/4"Schraubenschlüssel (2) Llaves de 1/2", (2) de 9/16"" Y (2) de ...
Page 64 - le
64 ID# M661144 02/06 10. 41 1 9. 2. 4. 3. 1. Faites rouler l'ensemble jusqu'à la position désirée. Remplissez le réservoir d'eau (129 litres environ) ou desable (136 kg environ) et installez le bouchon (41). Den fertigen Aufbau an die gewünschte Position rollen. Den Tank mit Wasser (ca. 129 l [34 US...
Page 67 - LISTE DES PIÈCES / TEILELISTE / LISTA DE PIEZAS; IDENTIFICATION DES PIÈCES
02/06 ID# M661144 67 SECTION E : REMBOURRAGE DU PANNEAU BAUABSCHNITT E: KORBWANDPOLSTERUNG SECCIÓN E: ALMOHADILLA DEL TABLERO Article Qté No. de pièce Description 1 2 266102 Contre-écrou, insert nylon 2 6 206151 Rondelle 6 mm D.I. x 2,5 cm D.E. 3 6 202871 Vis fendue, 6 pans, 6 mm x 19 mm 4 1 205225 ...
Page 70 - Attachez les sections de rembourrage du
70 ID# M661144 02/06 Enfilez la visserie (2, 3) dans les trous,sans serrer, comme illustré à la figure C. Attachez les sections de rembourrage du panneau (4, 5 et 6) avec la visserie et serrezà fond. Die Befestigungsteile (2 und 3) wie in Abb. Cdargestellt lose einsetzen. DieKorbwandpolster (4, 5 un...