Page 3 - WARNING
03/06 ID# M661134 3 Owner must ensure that all players know and follow these rules for safe operation of the system. WARNING • DO NOT HANG on the rim or any part of the system including backboard, support braces or net. • During play, especially when performing dunk type activities, keep player's fa...
Page 4 - MOVING SYSTEM; SAFETY INSTRUCTIONS; sections to separate during play and/or transport of the system.
4 ID# M661134 03/06 2 2 1 3 TO ADJUST BACKBOARD: 1. While holding handle, remove pin. 2. Move elevator up or down to desired height. 3. Replace pin full length to lock system at desired height. 511679 05/05 1 2 4 3 MOVING SYSTEM Adjust basketball backboardheight to lowest position. While holding pol...
Page 5 - NOTICE TO ASSEMBLERS; It is NOT acceptable to devise a makeshift weight system.
03/06 ID# M661134 5 IMPORTANT! Remove all contents from boxes. Be sure to check inside pole sections; hardware and additional parts are packed inside. NOTICE TO ASSEMBLERS Adult Assembly Required. Dispose of ALL packaging materials promptly. ALL basketball systems, including those used for DISPLAYS,...
Page 7 - PARTS LIST - See Hardware Identifier; NOTE; Hardware kit is designed for more than one
03/06 ID# M661134 7 Item Qty. Part No. Description 1 1 266000 Base 2 2 908184 Strut, Pole to Base 3 1 804833 Exacta Height Assembly 4 1 FR908006 Top Pole Section 5 1 FR918107 Middle Pole Section 6 1 FR908179 Bottom Pole Section 7 2 108183 Wheel Bracket 8 2 266200 Wheel, 4 Inch 9 2 108182 Rod, Axle 1...
Page 11 - TOOLS REQUIRED FOR THIS SECTION; SECTION A: ASSEMBLE THE BASE; and Sockets
03/06 ID# M661134 11 TOOLS REQUIRED FOR THIS SECTION SECTION A: ASSEMBLE THE BASE And/Or: This is what your system will look like when you’ve finishedthis section. 1/2” 9/16” Wrenches:(1) 1/2” and (1) 9/16” (2) Socket Wrenches and Sockets Extension Phillips-Head Screwdriver
Page 13 - • Support Pushnut/Axle
03/06 ID# M661134 13 2. Complete wheel assembly as shown in Figure A. Secure wheel bracket (7), wheel (8), axle (9), and pushnuts (13) to the tank (1) with a single bolt (18) and washer (51). Repeat procedure for opposite wheel. 7 8 9 13 13 18 1 Fig. A Do not install bothbolts into the wheelassembly...
Page 14 - WOOD SCRAP; HOLE; Identify pole sections.
14 ID# M661134 03/06 6 5 4 4. WOOD SCRAP (NOT SUPPLIED) 5 4 While maintaining alignment, bounce middle pole section (5) into top section (4)using a wood scrap as shown until the top pole no longer moves toward the poleidentification sticker on the middle pole. Identification Sticker Align dimple of ...
Page 17 - DO NOT TIGHTEN
03/06 ID# M661134 17 7 18 8. Rotate non-secured ends of tank struts (2) outward to mounting holes in tank asshown. Secure ends of tank struts (2) to wheel bracket (7), as shown. Repeat foropposite side. 2 2 48 47 9. Secure cover (28) to tank struts (2) usingbolts (47) and nuts (48) as shown. 28 TWO ...
Page 20 - SECTION B: ATTACH THE BACKBOARD; Screwdriver; Extension; Sawhorse; Upper Elevator tube
20 ID# M661134 03/06 TOOLS REQUIRED FOR THIS SECTION SECTION B: ATTACH THE BACKBOARD Phillips-Head Screwdriver This is what your system will look like whenyou’ve finished this section. Wrenches:(2) 1/2", (2) 9/16”, and (2) 3/4” (2) Socket Wrenchesand Sockets And/Or 1/2” 9/16” Extension 3/4” Sawh...
Page 22 - COMPLETED ASSEMBLY
22 ID# M661134 03/06 Support pole on sawhorse. Attach triangle plates(37) and elevator tubes (35 & 32) to top pole (4)using bolts (40 & 29) and nuts (31). Install pole cap (38). 2. 35 31 29 35 31 31 30 30 40 37 37 32 32 4 USE CAUTION; ELEVATORASSEMBLY IS HEAVY. TWO PEOPLE REQUIRED FORTHIS PR...
Page 23 - make sure
03/06 ID# M661134 23 3. Install handle assembly to lower elevator tubes (32) using bolt (29), spacers (36),and nut (31) as shown. 29 35 31 35 36 36 4 Before going on tonext step, make sure adjustable systemassembly is set to the10’ (3.05 m) setting. NOTE:
Page 26 - Install Slam Jam Rim to Backboard
26 ID# M661134 03/06 8. 56 58 39 54 55 Install Slam Jam Rim to Backboard 34 57 55 39 58 A B C D E A Fit rim (34) securely into bracket (54) as shown. Allow T-bolt (55) to slip through center hole in rim (34). B Install reinforcement bracket (56) onto T-bolt (55) as shown. C Install spring (57) onto ...
Page 27 - SAND
03/06 ID# M661134 27 10. Roll completed assembly to desired position. Fill tank with water (approx.34 gallons (129 Liters)) or sand (approx. 300 lbs. (136 kg)) and rotate thecap (41) into base (1). 41 ADD TWO GALLONS (7.6LITERS) OF NON-TOXICANTIFREEZE IN SUB-FREEZING CLIMATES. CAUTION! DO NOT LEAVEA...
Page 28 - SECTION C: APPLY HEIGHT AND MOVING LABEL & HEIGHT ADJUSTMENT; DO NOT ALLOW; Peel protective
28 ID# M661134 03/06 1. Apply height adjustment and moving label (46) to front of pole as shown. 2. A. While holding handle, remove pin (24).B. Move elevator up or down to desired height.C. Replace pin (24) full length to lock system at desired height. SECTION C: APPLY HEIGHT AND MOVING LABEL & ...
Page 29 - Gebrauchsanleitung für tragbare; Manual del Propietario del Sistema; Système portable - Manuel de; importantes sur votre modèle.; FRANÇAIS
29 03/06 ID# M661134 Inscrivez ici le numéro de modèle qui apparaît sur la boîte: Die Modellnummer vom Verpackungskarton hier eintragen: Escriba aquí el número de modelo que viene en la caja: Gebrauchsanleitung für tragbare Systeme Kundendienstzentrale • N53 W24700 South Corporate Circle • Sussex, W...
Page 30 - ARENA
30 ID# M661134 03/06 OUTILS ET MATÉRIEL REQUIS: • Deux clés et/ou clés à douilles et deux douilles (douilles longuesrecommandées). ET/OU • Petites et grandes clés anglaises OUTILS ET MATÉRIEL FACULTATIFS: 7/16" 1/2" 9/16" 3/4" 7/16" 1/2" 9/16" 3/4" • Deux (2) adultes ...
Page 31 - VORBEREITENDE MASSNAHMEN
03/06 ID# M661134 31 AVANT DE COMMENCER! VORBEREITENDE MASSNAHMEN ¡ANTES DE COMENZAR! Apprenez à connaître les composants de base de votre système de basket-ball..... Machen Sie sich mit den wichtigsten Teilen Ihres Basketballsystems vertraut… Conozca las piezas básicas de su sistema de baloncesto… ...
Page 32 - AVERTISSEMENT; ACHTUNG; ADVERTENCIA
32 ID# M661134 03/06 Le propriétaire doit s'assurer que tous les joueurs connaissent et suivent ces règles d'utilisation sûre du système. AVERTISSEMENT • NE VOUS SUSPENDEZ P AS sur le cerceau ou sur une autre partie du système, y compris le panneau, les supports ou le filet. • Durant le jeu, en part...
Page 33 - DÉPLACEMENT DU SYSTÈME; TRANSPORTSYSTEM; CONSIGNES DE SÉCURITÉ; SICHERHEITSHINWEISE; INSTRUCCIONES DE SEGURIDAD
03/06 ID# M661134 33 2 2 1 3 POUR AJUSTER LE PANNEAU : 1. Tout en tenant la poignée, retirez la goupille. 2. Montez ou abaissez le système élévateur jusqu'à la hauteur voulue. 3. Remettez la goupille à sa place en l'enfonçant à fond, pour bloquer le système à la hauteur désirée. FR511679 05/05 1 2 4...
Page 34 - NE RETOURNEZ PAS au magasin !; Gehen Sie NICHT zum Laden zurück!; ¡NO regrese a la tienda!
34 ID# M661134 03/06 Des questions ou des pièces manquantes ? Appelez le numéro du service clientèle (NUMÉRO GRATUIT) qui figure en première page! STOP! STOP! STOP! NE RETOURNEZ PAS au magasin ! Fragen oder fehlende Teile? Rufen Sie die GEBÜHRENFREIE Telefonnummer (in den USA und Kanada) auf der Vor...
Page 36 - LISTE DES PIÈCES; REMARQUE; Le kit de visserie est conçu pour plus d’un
36 ID# M661134 03/06 LISTE DES PIÈCES FRANÇAIS Légende Qté No. de réf. Description 1 1 266000 Socle 2 2 908184 Contrefiche, poteau/socle 3 1 804833 Ensemble hauteur Exacta 4 1 FR908006 Section de poteau supérieure 5 1 FR918107 Section de poteau centrale 6 1 FR908179 Section de poteau inférieure 7 2 ...
Page 37 - DEUTSCH; TEILELISTE; Die beiliegenden Befestigungsteile sind für
03/06 ID# M661134 37 DEUTSCH TEILELISTE Nr. Anz. Teilenummer Beschreibung 1 1 266000 Sockel 2 2 908184 Verstrebung, Stange zu Sockel 3 1 804833 Exacta-Höheneinstellkomponenten 4 1 FR908006 Oberes Stangenteil 5 1 FR918107 Mittleres Stangenteil 6 1 FR908179 Unteres Stangenteil 7 2 108183 Radhalterung ...
Page 38 - ESPAÑOL; LISTA DE PIEZAS; El juego de herraje está diseñado para más
38 ID# M661134 03/06 ESPAÑOL LISTA DE PIEZAS NOTA: El juego de herraje está diseñado para más de un estilo de sistemas de baloncesto. No se usará todo el herraje. Artículo Cant. Pieza N.º Descripción 1 1 266000 Base 2 2 908184 Puntal, poste a base 3 1 804833 Conjunto Exacta Height 4 1 FR908006 Secci...
Page 39 - IDENTIFICATION DES PIÈCES (ENTRETOISES EN ACIER)
03/06 ID# M661134 39 IDENTIFICATION DES PIÈCES (BOULONS & VIS) BEFESTIGUNGSTEILESCHLÜSSEL (BOLZEN UND SCHRAUBEN) IDENTIFICADOR DE HERRAJE (PERNOS Y TORNILLOS) * IL EST POSSIBLE QUE VOUS AYEZ D'AUTRES PIÈCES AVEC CE MODÈLE. * DIESEM MODELL KÖNNEN ZUSÄTZLICHE TEILE BEIGEPACKT SEIN. * PUEDE HABER P...
Page 41 - SECTION A : MONTAGE DU SOCLE; Clés à douilles et douilles; un tournevis cruciforme
03/06 ID# M661134 41 OUTILS REQUIS POUR CETTE SECTION FÜR DIESEN BAUABSCHNITT BENÖTIGTES WERKZEUG HERRAMIENTAS REQUERIDAS PARA ESTA SECCIÓN SECTION A : MONTAGE DU SOCLE BAUABSCHNITT A: ZUSAMMENBAU DES SOCKELS SECCIÓN A: MONTAJE DE LA BASE Voici à quoi ressemblera votre système lorsquevous en aurez f...
Page 52 - OUTILS REQUIS POUR CETTE SECTION
52 ID# M661134 03/06 SECTION B : ATTACHEZ LE PANNEAU BAUABSCHNITT B: ANBRINGEN DER KORBWAND SECCIÓN B: CONECTE EL RESPALDO (2) clés 1/2", (2) clés 9/16" ET (2) clés 3/4" (2) 1/2", (2) 9/16" UND (2) 3/4"Schraubenschlüssel (2) Llaves de 1/2", (2) de 9/16"" Y (2) de ...
Page 61 - Sable
03/06 ID# M661134 61 10. 41 1 9. 2. 4. 3. 1. Faites rouler l'ensemble jusqu'à la position désirée. Remplissez le réservoir d'eau (129 litres environ) ou desable (136 kg environ) et installez le bouchon (41). Den fertigen Aufbau an die gewünschte Position rollen. Den Tank mit Wasser (ca. 129 l [34 US...