HP PCLA8205B - Manual
HP PCLA8205B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Notice; is a trademark of Intel Corporation.
- Page 3 – Connecting to a Netware 3.12 Server; Windows for
- Page 4 – YES
- Page 5 – Connecting to a Netware 3.12 Server; Requirements
- Page 6 – Click on “Close” button, and files will copy.
- Page 7 – Connecting to a Netware 4.11 Server
- Page 9 – Connecting to a Netware 4.11 Server
- Page 11 – Connecting to a Windows NT Server 3.51
- Page 12 – Windows for Workgroups Version 3.11; Select the “Networks” button in the “Network Setup” dialog box.
- Page 14 – Connecting to a Windows NT Server 3.51
- Page 15 – Click on the “Configuration” folder in the “Network” dialog box.
- Page 16 – Windows NT
- Page 17 – Select the “Network” icon, and click “YES” to install NT networking.
- Page 21 – After “Network has been installed on this computer” click on “Finish.
- Page 23 – Connecting to a Windows NT Server 4.0
- Page 26 – Connecting to a Windows NT Server 4.0
- Page 29 – Insert the Windows NT Workstaion CD.
EtherExpress
TM
PRO/10+ ISA
PCLA8205B
Installation Guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- HP
- Model
- PCLA8205B
- Document type
- Manual
- Language(s)
- English
- Pages
- 35
- File size
- 102.4 KB
- Format
Summary
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not ...
1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress ISA 10MBS Ethernet adapter card and drivers disk Ve...
1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 7 Remove the Intel drivers diskette and reboot the machine, and boot to a DOS prompt. 8 Insert Netware Client for DOS and Windows Disk 1 and execute “A:\INSTALL.” 9 Change the settings to match the following and then option 6 ...
