Page 2 - Description
Description ● Please record the Model number and Serial number of your machine on the back cover of this book for future reference.- The Serial number can be found on the inside door trim. Interlocking door andrelease lever. Front adjustable feet Dispenser drawer Control panel ( ● Varies by Model) B...
Page 3 - Contents; Wash Labels Explained, 4; Care and Maintenance, 18; WASHER DRYER
Contents Description, 2 Wash Labels Explained, 4 Installation, 5-8 UnpackingRemove the transit fixingsLocationLevellingWater connectionDrainage connectionElectrical connectionBefore you start using your machine Control Panel Features, 9 AquariusAquarius+ Programmes and Option Modifiers, 10-16 Starti...
Page 4 - Wash Labels Explained
Wash Labels Explained The number inside the wash tub shows the maximum water temperature, in ˚C. If there are no bars, the garment can be spun and rinsed as normal. One bar indicates a reduced spin speed programme should be used. Two bars mean the clothes need a mild wash action, but can be spun and...
Page 5 - Unpacking
Installation 5 Description C ont ents Programmes and Option Modif iers C ontrol P anel F eatures Installation Wash L abels Explained Det ergents and L aundry C are and Maint enanc e Prec autions and A dvic e Something Wrong - T roubleshooting Servic e GB ! Read these instructions carefully: the foll...
Page 6 - Remove the transit fixings; Location
Installation Did you know?... ● ...the transit fixings are fitted to ensure that your machine is undamaged during delivery. ● ...both of the transit fixings MUST BE removed before using the machine, be sure to remove TWO bolts,TWO washers, TWO rubber grommets and TWO nylon spacers, not doing so will...
Page 7 - Water Connection; Benefits of cold fill; Levelling
Water Connection Connecting the cold water inlet hoses with the ‘Y’piece connector. ! Remember: please use the new hoses supplied, fitted to the machine. Old hoses may cause leaks dueto worn out washers or may be split due to waterpressure. ! Remember: This is a cold-fill machine... BOTH fill hoses ...
Page 8 - Drainage Connection; Electrical connections; Before you start using your machine
Installation Drainage Connection ! Although you may need to move the hooked end support along the grey drainage hose, DO NOT removeit. ! Whichever drainage method you use, make sure that the hooked end support is fixed level to, or above the‘Plumbing Indicator Line’ ( see Description page 2). We rec...
Page 9 - Control Panel Features; Aquarius control panel
Control Panel Features Aquarius control panel Control panel features ● Programme listing: To consult a straight forward chart of the different programmes available. ● Option buttons: To select the options available ( see Programme Table and Option Modifiers ). ● Option lights: When an option is sele...
Page 10 - Starting a Programme; Starting a typical wash and dry programme
Starting a Programme 1. Switch the machine on by pressing the On/Off button. 2. Sort your laundry into groupsby washcare labels. Load themachine.Close the machine door by pushing it until it clicks. 3. Add detergent and fabric conditioner to the dispenser drawer. ! Refer to detergent manufacturer’s ...
Page 11 - Drying; Setting drying programmes; Drying table
Drying Setting drying programmes Independent drying only programme: 1. Remove the wet laundry and in drum dosing ball (if used) until the correct ‘Drying Weight Load’( see Drying table, below ) is left in the drum. Close the door until it clicks shut. 2. Turn the programme selector dial to drying pr...
Page 13 - Programme Table
Programme Table Programme Table * Programme setting for test in accordance with IEC 50229 and EN 50229 ID Label Pr ogramme T ype / F abric Description T emp Max Load Appr o ximat e Soil Spin Aquarius Aquarius + Recommended (˚C) (kg) Pr ogramme Time Le vel Speed A v ailab le Options A v ailab le Opti...
Page 14 - Option modifiers
Option Modifiers andSpecial Features Option modifiers ! Not all options can be used on all programmes - ( see Programme Table for option availability ). ● Drying High Heat: Use this option to select a higher drying temperature for more hard wearing or heat resistant cotton material.When a drying onl...
Page 15 - Special features
Option Modifiers andSpecial Features Special features ! Not all special features can be used on all programmes - ( see Programme Table for option availability ). ● Fast Wash: The Fast Wash programmes are designed for lightly soiled loads delivering quick results for smaller loads, using less energy....
Page 16 - Automatic features; Energy saving and water levels
Automatic features Unbalanced load detection The machine has an inbuilt feature to prevent it from spinning too fast with an unbalanced load. When an unbalanced load is detected, the machine will attempt to redistribute the load in order to balance it evenly to achieve full spin speed. If this is no...
Page 17 - Detergents and Laundry; Washcare Tips
Certain laundry products work better in some machines than others. At Hotpoint we know this is true because we’ve done the research to prove it. We used real everyday clothes and ran tests to find out which washing powder works best with Hotpoint. The results proved that Hotpoint and Ariel produces ...
Page 18 - Care and maintenance; Cleaning; Changing the plug
Care and maintenance Cleaning ! Unplug your machine when cleaning it and before all maintenance operations. ! Do not clean any part of the machine with abrasive cleaners, scouring agents, acids, any bleach or metal polish as they may cause damage. ● Use a damp cloth or silicon polish to clean the ex...
Page 19 - Precautions and advice; General safety; Recycling and Disposal information
Precautions and advice General safety ● Unplug your appliance when cleaning it and duringall maintenance operations. ● This machine should only be used by adults and in accordance with the instructions. ● Do not overload or underload the machine. In addition to reducing the quality of the wash,this ...
Page 20 - Safety advice; Technical Details Chart
Precautions and advice Safety advice ! This machine was designed and built in compliance with the applicable international safety regulations.The following information is provided for your safetyand should be read carefully. ● This machine is designed for domestic use only. ● Before using your machi...
Page 21 - Section 1: All Aquarius Models - General Troubleshooting
Something Wrong? - Troubleshooting The machine won’t start:(Nothing lights up on the control panel). Lights illuminate on the control panel but the washcycle will not start. The machine fails to fillwith water. The machine does notdrain or spin (during the first wash cycle,after installation). The m...
Page 23 - Section 3: Specific Error Messages on the Control Panel; Section 2: All Aquarius Models - Problems with the Drying cycle?
Something Wrong? - Troubleshooting 23 Section 3: Specific Error Messages on the Control Panel Your machine carries out automatic checks at various stages of the wash cycles - Error messages will be displayedon the control panel to indicate there is something wrong.The error message displayed is depe...
Page 24 - Spare Parts; Service; Before calling the Service Centre:; Indesit; Key Contacts; After Sales Service
Spare Parts This is a complex machine. Repairing it yourself or having a non-authorised person try to repair it couldcause harm to one or more persons, could damagethe machine and could invalidate the spare parts warranty.Call an authorised technician if you experience problemswhile using the machin...
