Hotpoint RLA61 - Manual
Hotpoint RLA61 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – For Your Safety; For your safety, read the following advice:; Only use this fridge for storing domestic foodstuffs.
- Page 3 – Installation; Location & Air Circulation; Prolong the life of the fridge.; Minimum space required to open door
- Page 5 – Electrical Supply; Earth
- Page 6 – Controls; Controlling the Temperature of the Fridge Compartment
- Page 7 – Useful Advice; STORAGE ZONES
- Page 8 – Making the best use of your Fridge; Note: Always use the handle provided to open the fridge door.; Storing Food in a Fridge; Pack and store cooked and fresh food separately.
- Page 11 – No manual defrosting required; Defrosting
- Page 12 – Cleaning
- Page 13 – Note : Leave the door ajar to prevent an accumulation of odours.; Changing the Light Bulb; Remove old bulb and fit new one.; Maintenance
- Page 14 – Door Reversal
- Page 15 – Door Handle Reversal:
- Page 16 – Troubleshooting
- Page 17 – Notes
- Page 18 – Recycling & Disposal Information; Hotpoint guarantee
- Page 19 – After Sales Service
- Page 20 – Key Contacts; Repair Service and Information Help Desk; Extended Warranties; Genuine Parts and Accessories
LARDER FRIDGE - MODELS RLA51, RLA53, RLA61, RLM51, RLM53, RLM61
INSTRUCTIONS FOR INSTALLATION & USE
GETTING STARTED:
To ensure that your fridge runs reliably and efficiently follow these steps.
Choose a location for your
fridge, away from any heat
sources and
allow adequate ventilation
- 30mm
(1
1
/
4
inch) gap above.
Level the fridge by
adjusting the front feet.
This will stop rocking or
vibration and keep the
door aligned.
Your fridge is now
working.
If after 24 hours your
fridge is not operating as
you want, refer to the
Troubleshooting section.
Move the fridge into
position, using the sides
of the cabinet. Take care
to avoid damaging the
refrigerant circuit pipe
work on the rear.
Read the rest of these instructions to get the best from your appliance
and remember to fill in your guarantee registration.
Keep this Book in a safe place for quick reference.
STEP 1
STEP 2
STEP 3
STEP 6
SAFET
Y &
INST
ALL
A
TION
C
ONTR
OLS
USEFUL AD
VICE
CLEANING &
MAINTENANCE
SER
VICE &
GU
AR
ANTEE
TR
OUBLESHOO
TING
NB. The spanner is for illustration
only and is not supplied with the
fridge.
Before plugging in and
switching on, leave the
fridge in its final
location for at least 15
minutes to allow it to
settle.
STEP 5
STEP 4
Plug in and switch on.
Allow the fridge to cool
before placing food
inside.
All food in the fridge
should be covered.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Hotpoint
- Model
- RLA61
- Document type
- Manual
- Language(s)
- English
- Pages
- 20
- File size
- 294.8 KB
- Format
Summary
For Your Safety For your safety, read the following advice: The fridge cooling system contains a small amount of gas which is environmentallyfriendly but flammable. To avoid any risk :- ● Install the fridge following the installation instructions and ensure that ventilation openings are kept clear o...
Installation Location & Air Circulation Locate your fridge away from sources of heat e.g. cookers,radiators, direct sunlight as extreme temperature willaffect its performance. Allow a minimum 100mm (4 inches) between the top ofthe fridge and the ceiling or the underside of a wallcupboard. Provid...
Installation Electrical Supply WARNING: This appliance must be earthed. The fridge must be positioned so that the plug is accessible afterinstallation. FusesYour appliance comes fitted with a plug and a 13A fuse. If you need to replace thefuse, only use those rated at 13A and ASTA approved to BS1362...
