Hotpoint RLA34 - Manual
Hotpoint RLA34 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – For Your Safety; For your safety, read the following advice:; Only use this fridge for storing domestic foodstuffs.
- Page 3 – Installation; Location & Air Circulation
- Page 5 – Electrical Supply; Earth
- Page 6 – Controls; Controlling the Temperature of the Fridge Compartment
- Page 7 – Useful Advice; STORAGE ZONES
- Page 8 – Making the best use of your Fridge; Note : Always use the handle provided to open the fridge door.; Storing Food in a Fridge; Pack and store cooked and fresh food separately.
- Page 10 – Remove food and wrap or cover to keep it cool.; Defrosting and Cleaning
- Page 11 – Note : Leave the door ajar to prevent an accumulation of odours.; Changing the Light Bulb; Remove old bulb and fit new one.
- Page 12 – Maintenance
- Page 13 – Troubleshooting
- Page 14 – Recycling & Disposal Information; Hotpoint guarantee; Disposal of old electrical appliances
- Page 15 – After Sales Service
- Page 16 – Key Contacts; Repair Service and Information Help Desk; Extended Warranties; Genuine Parts and Accessories
LARDER FRIDGE - MODELS RLA34,RLA36,RLM34,RLM36
INSTRUCTIONS FOR INSTALLATION & USE
GETTING STARTED:
To ensure that your fridge runs reliably and efficiently follow these steps.
Choose a location for your
fridge, away from any
heat sources and
allow adequate
ventilation - 30mm
(1
1
/
4
inch) gap above.
Level the fridge by
adjusting the front feet.
This will stop rocking or
vibration and keep the
door aligned.
Plug in and switch on.
Allow the fridge to cool
before placing food
inside.
All food in the fridge
should be covered.
Move the fridge into
position, using the sides
of the cabinet. Take care
to avoid damaging the
refrigerant circuit pipe
work on the rear.
Before plugging in and
switching on, leave the
fridge in its final
location for at least 15
minutes to allow it to
settle.
Your fridge is now
working.
If after 24 hours your
fridge is not operating as
you want, refer to the
Troubleshooting section.
Read the rest of these instructions to get the best from your appliance
and remember to fill in your guarantee registration.
Keep this Book in a safe place for quick reference.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
SAFET
Y &
INST
ALL
A
TION
C
ONTR
OLS
USEFUL AD
VICE
CLEANING &
MAINTENANCE
SER
VICE &
GU
AR
ANTEE
TR
OUBLESHOO
TING
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Was this manual helpful?
About this manual
- Brand
- Hotpoint
- Model
- RLA34
- Document type
- Manual
- Language(s)
- English
- Pages
- 16
- File size
- 282.6 KB
- Format
Summary
For Your Safety For your safety, read the following advice: The fridge cooling system contains a small amount of gas which is environmentallyfriendly but flammable. To avoid any risk :- ● Install the fridge following the installation instructions and ensure that ventilation openings are kept clear o...
Installation Location & Air Circulation Locate your fridge away from sources of heat e.g.cookers, radiators, direct sunlight as extreme temperaturewill affect its performance. Allow a minimum 30mm (1 1 / 4 inch) between the top of the fridge and the underside of the worktop. Providing you follow...
Installation Electrical Supply WARNING: This appliance must be earthed. The fridge must be positioned so that the plug is accessible afterinstallation. FusesYour appliance comes fitted with a plug and a 13A fuse. If you need to replace thefuse, only use those rated at 13A and ASTA approved to BS1362...
