Hotpoint FFS90 - Manual
Hotpoint FFS90 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – For Your Safety; For your safety, read the following advice:; Only use this fridge freezer for storing domestic foodstuffs.
- Page 3 – Installation; Prolong the life of the fridge freezer.; Minimum space required to open door
- Page 4 – Push until the part clicks into place.
- Page 5 – Electrical Supply
- Page 6 – Controls; What the display shows during normal operation:
- Page 7 – Holiday Function
- Page 8 – Freezer High Temperature Warning symbol and buzzer
- Page 9 – Useful Advice; Making the best use of your Fridge Freezer
- Page 10 – STORAGE ZONES; Storing Food in a Fridge
- Page 11 – Advice on Adjusting Shelves
- Page 12 – Salad Bins
- Page 13 – Storing Food in a Freezer
- Page 14 – Advice on Using Freezer Drawers
- Page 15 – Cleaning; Interior
- Page 16 – WARNING: Switch off electricity supply and pull out the mains plug; Maintenance; Going Away
- Page 17 – WARNING: Switch off electrical supply and pull out the mains plug.; Remove Top Door; Remove Lower Door; Door Reversal
- Page 18 – Refit Lower Door; Refit Top Door; Door Handle Reversal
- Page 19 – Troubleshooting
- Page 20 – OPERATING SOUNDS OF A FRIDGE FREEZER
- Page 21 – Notes
- Page 22 – Recycling & Disposal Information; “Satisfac tion guaranteed or your money back”; Guarantee
- Page 23 – After Sales Service; Hotpoint appliance than us - the manufacturer”
- Page 24 – Repair Service and Information Desk; Extended Warranties; Key Contacts
FRIDGE FREEZER - MODELS FFA90, FFS90 & FFM90
INSTRUCTIONS FOR INSTALLATION & USE
GETTING STARTED:
To ensure that your fridge freezer runs reliably and efficiently follow these steps.
SAFET
Y &
INST
ALL
A
TION
C
ONTR
OLS
USEFUL AD
VICE
CLEANING &
MAINTENANCE
SER
VICE &
GU
AR
ANTEE
TR
OUBLESHOO
TING
Choose a location for your fridge
freezer, away from any heat
sources and allow adequate
ventilation - 100mm
(4 inch) gap above.
Level the fridge freezer by
adjusting the front feet.
This will stop rocking or vibration
and keep the door aligned.
If you are freezing fresh food, turn
on Fast Freeze by pressing the
switch 24 hours before placing
the food inside.
Stage 1:
When Fast Freeze is pressed.
Stage 3:
Freezer compartment is set to
Fast Freeze.
The freezer High Temperature
symbol has turned off.
Stage 2:
After 8 seconds the display will
show temperature reading with
the freezer High Temperature
symbol on.
What the display will show as the Freezer
compartment cools if Fast Freeze is pressed:
Move the fridge freezer into
position, using the sides of the
cabinet.
Take care to avoid damaging the
refrigerant circuit pipe work on
the rear.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 7
Your fridge freezer is now
working.
If after 24 hours your fridge
freezer is not operating as you
want, refer to the Troubleshooting
section.
STEP 8
NOTE:
Read the rest of these instructions to get the best from your appliance and remember to fill in your guarantee registration.
Keep this Book in a safe place for quick reference.
NB. The spanner is for illustration only and is
not supplied with the fridge freezer.
After the front feet have been
adjusted and the fridge freezer is
level, fit the left and right hand
bottom hinge covers supplied.
Align with the cover plate slots
and push into position.
STEP 6
Before plugging in and switching on, leave the fridge freezer in its final location for at least 15 minutes to allow it to settle.
Plug in and switch on. Allow the
fridge freezer compartments to
cool before placing food inside.
All food in the fridge freezer
should be covered.
The freezer High Temperature symbol will stay
on until the freezer compartment has cooled
to its factory setting (-18˚C).
See CONTROLS section to find out how to change the display or change compartment temperatures.
Place the fresh food inside.
Fast freeze will automatically cancel after 48
hours.
What the display will show as both
compartments cool:
Stage 1: Freezer
The display will show temperature
reading with the freezer High
Temperature symbol on.
Stage 3: Fridge
The display will show temperature
reading with arrow indicating the
fridge compartment is cooling to
its factory setting (4˚C). When 4˚C
is reached the arrow turns off.
Stage 2: Freezer
The display will show arrow
indicating the temperature is
cooling down, until -18˚C is
reached, the arrow then turns off.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
For Your Safety For your safety, read the following advice: The fridge freezer cooling system contains a small amount of gas which isenvironmentally friendly but flammable. To avoid any risk :- ● Install the fridge freezer following the installation instructions and ensure that ventilation openings ...
Installation Location & Air CirculationLocate your fridge freezer away from sources of heat e.g.cookers, radiators, direct sunlight as extreme temperaturewill affect its performance. Allow a minimum 100mm (4 inches) between the top ofthe fridge freezer and the ceiling or the underside of a wallc...
Installation Levelling:Level the fridge freezer when it is in its final location by adjusting the front feet, untilfirm contact is made with the floor. This will stop rocking or vibration and keep thedoor aligned which helps the fridge freezer run reliably and efficiently. Note: Before plugging in a...