Hoover S3755050- User Manual

Page 2 - Important Safeguards!; Save these instructions!

Fill in and retain The model and serial number are located on the bottom of the cleaner. For your personal records, please enter the COMPLETE model and serial number inthe spaces provided and retain this information. Your cleaner is model________________________________________________________ and h...

Page 3 - Assembling cleaner; Carton contents; Connect hose

3 Unpack cleaner from carton and iden-tify the parts shown. Remove anddispose of cardboard packing. A. Canister cleanerB. WindTunnel™ powered nozzleC. Extension wand and hose Operate cleaner only at voltage speci-fied on data plate on bottom of cleaner. A B C 1-1 1. Assembling cleaner This cleaner w...

Page 4 - Cleaner description

2. How to use 4 Cleaner description The assembled cleaner will look like the drawing. Operate cleaner only at voltage specified on dataplate on bottom of cleaner. This cleaner is intended for household use only. 1. WindTunnel™ carpet and floor power nozzle: automatically adjusts to different carpet ...

Page 5 - Carpet cleaning; Power nozzle; Handle positions; Polarized plug

Hard surface floor cleaning The power nozzle can be used forcleaning hard surface floors such aswood, linoleum, vinyl, asphalt and rub-ber tile, sealed cork, concrete and ter-razzo, as well as carpet. To turn the brushes off for hard surfacefloor cleaning, press the FLOOR/CAR-PET (E) switch again. N...

Page 6 - How to clean stairs; Select the proper tool; Cleaning tools; Edge cleaning; Dirt cup; When to empty

Should the dirt cup platform flaps (C)become dislodged, refit using the dia-gram on the platform. F G H The dirt cup needs emptying before thedirt reaches the “MAX” line (A) on thedirt cup or after every use if preferred. CAUTION: Very fine materials, suchas face powder, cornstarch, fireplaceashes o...

Page 9 - Lubrication

9 3-16 Agitator brush rollreplacement When to replace Disconnect cleaner from electricaloutlet. When agitator brush roll brushes areworn, the brush roll should be replaced. To check condition of brushes, moveedge of a card across bottom plate whileturning brush roll. To maintain cleaningeffectivenes...

Page 10 - Clearing blockages

Problem: Cleaner won’t run Problem: Cleaner suction low Problem: Agitator brush roll won’t run Problem: Nozzle won’t pick up Possible cause Possible solution • Not “ON” at hand grip.• Push Power ON/Suction Control slide switch forward. • Not firmly plugged in.• Plug unit in firmly. • No voltage in w...

Hoover S3755050- User Manual

Table of Contents:

Other Manuals for Hoover S3755050

Summary

Other Hoover Models