Hoover GL71GL01001- User Manual

Page 2 - IMPORTANT SAFETY REMINDERS; The Environment

- 1- GB IMPORTANT SAFETY REMINDERS This appliance should only be used for domestic cleaning, as described in this user guide. Please ensure that this guide is fully understood before operating the appliance.Do not leave the appliance plugged in. Always switch off and remove the plug from the socket ...

Page 3 - GETTinG TO KnOW YOUr CLEanEr; The ultra agile

GETTinG TO KnOW YOUr CLEanEr - 2 - The ultra agile way to clean all surfaces. HANDLE RELEASE BUTTON PRE MOTOR FILTERACCESS BUTTON FLEXIBLE HOSE DUSTING BRUSH PET HAIR REMOVER TURBO BRUSH* PARQUET NOZZLE* (*Certain models only) MULTI-FUNCTION TOOL* TURBO BRUSH STORED ON BOARD CARRY HANDLE EXHAUST FIL...

Page 4 - PrEParinG YOUr CLEanEr

PrEParinG YOUr CLEanEr Insert the internal power plug on the main body into the YELLOW socket located in the neck of the cleaner. Take the foot of the cleaner and press the upright lock release pedal. Lower the neck to the floor. Remove the accessories from the main packaging. You should find the fo...

Page 6 - Settings

UPriGHT LOCK rELEaSE Unlock the cleaner by pressing the upright lock pedal at the rear of the cleaner with your foot. After use return the cleaner to the upright lock position. You will hear an audible click once locked in place. aCTiVE STEErinG The cleaner comes with a unique steering function that...

Page 7 - CLEaninG TOOLS; HanDLE rELEaSE

CLEaninG TOOLS ! iMPOrTanT! When using cleaning tools, the cleaner must be kept in the upright position, particularly when cleaning stairs. ! HanDLE rELEaSE 1 2 To clean with accessories, release the handle from the main body of the cleaner by pressing the handle release button on the rear of the cl...

Page 10 - CLEaninG THE PrE MOTOr FiLTErS; CLEaninG THE EXHaUST FiLTEr

- 9 - CLEaninG THE PrE MOTOr FiLTErS Lift the bin release latch and remove the dust bin from the cleaner. Remove the turbo tool from the top cover of the cleaner. 1 Place the bin on a flat surface and lift latch to access the filter. 2 Remove the BLUE filter pack (containing the flexible HEPA filter...

Page 11 - CLEaninG THE SEParaTiOn SYSTEM

- 10 - CLEaninG THE SEParaTiOn SYSTEM Lift the bin release latch and remove the dust bin from the cleaner. Remove the turbo tool from the top cover of the cleaner. 1 Place the bin on a flat surface and lift latch to access the filter. 2 Remove the BLUE filter pack (containing the flexible HEPA filte...

Page 12 - CHanGinG THE aGiTaTOr anD BELT; CLEarinG a BLOCKaGE

CHanGinG THE aGiTaTOr anD BELT If your cleaner is not picking up efficiently, the belt or brushes (or both) may need replacing, but first please make sure you have: • Emptied the dust container • Cleaned the filters • Checked for blockages CLEarinG a BLOCKaGE iMPOrTanT: Switch the cleaner off and re...

Page 13 - User checklist; iMPOrTanT inFOrMaTiOn; Hoover Service; GUaranTEE STaTEMEnT; Quality

- 12 - GB User checklist If your cleaner is not working properly run through thefollowing checklist.1. Is there a working electricity supply to the cleaner? Check with another electrical product. 2. Is the dust bin full or choked with fine dust? To empty the dust container, see instructions on P9. 3...

Hoover GL71GL01001- User Manual

Table of Contents:

Summary

Other Hoover Models