Hoover Breathe Easy- User Manual

Page 2 - I m p o rtant Safeguard s; READ A L L INSTRUCTIONS BEFORE USING THIS A P P L I A N C E; Save these instru c t i o n s !

2 Review this manual before operating cleaner. Thank you for choosing a HOOVER product. Please enter the COMPLETE model and serial numbers in the spaces provided. Model__________________________________________ Serial number___________________________________ Hint: Attach your sales receipt to this ...

Page 3 - If you need any assistance call:; Visit our website at; Please do not return this product to the store.; Carton contents

3 1. Cleaner Assembly If you need any assistance call: Visit our website at www.hoover.com. Click on the “Service” button to find the service outlet nearest you OR 1-800-944-9200 for an automated referral of service outlet locations (U.S. only) OR 1-330-499-9499 to speak with a representative in our...

Page 4 - Assemble handle; “UP”; Attach cord

4 Assemble handle 1-2 1-3 1-5 1-4 1-6 Place upper (B) and lower (C) handle sections on a flat surfacewith cord hooks (A) on top. With hands on sides of handle sec-tions, push sections together firmly until they “click” into place. *Do not press against the rod (D) extending from the lower han-dle. I...

Page 5 - Attach handle

5 1-14 Push bolt into hole on lower f ront of handle. If bolt will not go through hole easily,check the following: • the bracket is properly positioned (Fig.1-9) • the handle is pushed completely down(Fig. 1-13) 1-15 Place n u t in recessed area at back of h a n d l e . Hold nut in place while tight...

Page 6 - Attach filter bag

6 1-20 1-21 1-22 1-19 U T E C B A Align opening (U) in filter bag with dirttube (T) inside bag compartment. Push bag collar firmly onto dirt tube. Tuck top and bottom of bag into bagcompartment. To replace bag door, insert the tabs (V)on bottom of bag door into the slots onbag compartment. Make sure...

Page 7 - Handle release lever; Polarized plug; Handle positions

2-1 2-2 2-3 2. How to use r 1 4 3 6 8 7 9 10 13 12 11 15 14 2 2 16 17 2 18 19 20 5 15 The assembled cleaner will look like the drawing. 1. Handle2. Cord hooks : wrap cord around hooks for storage. The top hook can be rotated right or leftfor easy cord release. 3. Extra belt storage: inside bag compa...

Page 8 - Transporting cleaner

2-4 B A C D 2-5 2-6 2-7 To move your cleaner from room to room, put handle in upright position, tiltcleaner back on rear wheels and pushforward. The cleaner can also be moved by liftingit as shown. For ease in sliding the control, the han-dle should be in the upright position (C). The front of the c...

Page 10 - When to replace; Filter bag; Where to buy; Removing bag door; Changing filter bag; Installing filter bag

10 The following sections are concernedwith proper maintenance of the cleaner.Familiarize yourself with these homemaintenance tasks and keep this owner’smanual in a convenient place where youcan refer to it when needed. Proper useand care of your cleaner will ensure con-tinued cleaning effectiveness...

Page 11 - The headlight; Belt replacement; How to replace; Removing hood; Removing used belt

11 3-4 3-5 3-6 3-7 3-8 3-9 The headlight How to replace Disconnect cleaner from electrical outlet. Belt replacement How to replace G H F What to buy This cleaner uses a 12 volt, wedge base type 912 bulb, Hoover P a r t No. 27313-101. Removing hood Place handle in low position and turn clean- er over...

Page 12 - Lubrication

12 3-10 3-11 3-12 3-13 I J Installing brush roll Grasp brush roll firmly and fit it into position by first sliding belt side into therectangular slot (I) on side of cleaner. Pull other side of brush roll (J) intoplace. Turn brush roll making sure belt is notpinched between brush roll and cleaner bas...

Page 13 - Problem: Cleaner hard to push; Possible solution; Service; Clearing blockages

13 Problem: Cleaner won’t run Problem: Cleaner won’t pick up Problem: Cleaning tools won’tpick up Possible cause Possible solution • Not firmly plugged in.• Plug in firmly. • No voltage in wall plug.• Check fuse or breaker. • Blown fuse/tripped breaker.• Replace fuse/reset breaker. Possible cause Po...

Hoover Breathe Easy- User Manual

Table of Contents:

Other Manuals for Hoover Breathe Easy

Summary

Other Hoover Models